Synthesis and characterization of iPP‐sPP stereoblock produced by a binary metallocene system

Stereoblock polypropylenes comprising of iPP and sPP segments are synthesized by polymerization of the following binary system of metallocenes: the C_s‐symmetric [2,7‐t‐Bu₂(Flu)₂Ph₂C(Cp)ZrCl₂] and the C₂‐symmetric rac‐Me₂Si(2‐Me‐4‐Ph‐Ind)₂ZrCl₂. Blends of samples made either by each catalyst individually (solution blend) with materials obtained with the mixed catalyst system (reactor blend) are compared. The simultaneous presence of MAO and DEZ, enhancing fast and reversible transfer of the growing chains between the two active centers, leads to the formation of a stereoblock microstructure. In this case, low molecular weight polymers are obtained. The junction between the blocks is qualitatively observed in ¹³C NMR. When made in toluene, the stereoblock material consists of a majority of syndiotactic sequences, whereas the ratio is more equilibrated when the polymerization was conducted in the more polar chlorobenzene. This is confirmed by the results obtained with ¹³C NMR, CRYSTAF, HT HPLC, DSC, SSA, WAXD, and optical microscopy. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1422–1434     

Solvent‐free inkjet printing process for the fabrication of conductive,transparent, and flexible ionic liquid‐polymer gel structures

A new and solvent‐free process for the fabrication of inkjet printed ionic liquid‐polymer gel microstructures with high‐resolution (line widths of ～40 μm), good electrical conductivity (5–30 mS cm^?1), optical transparency, and mechanical flexibility is presented. Carrying out the printing and polymerization process in nitrogen atmosphere eliminates the inhibiting influence of oxygen and guarantees homogeneously gelled structures. Careful selection and combination of ionic liquids (ILs) and unsaturated monomers makes it possible to achieve low viscosities which are printable with commercially available inkjet printers and printheads without adding extra solvents. By using different types and amounts of ILs and monomers the resulting properties of the printed IL‐polymer gels can be controlled in terms of ionic conductivity, optical transmission, and mechanical flexibility. Higher conductivities are possible by using a bifunctional instead of a monofunctional monomer, which allows one to lower the amount of monomer without loss in mechanical strength. Cast samples make it possible to obtain data of transmission (～90% for 170‐μm thick films) and mechanical flexibility (E = 0.02–0.23 MPa) of bulk material. Comparing electrical conductivity of printed and cast samples, the higher values of printed samples indicate the conductivity enhancing influence of moisture absorbed from the surrounding atmosphere after the fabrication process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Macrocyclic Polyethers as Enolate Activators in Homogeneous and Heterogeneous Systems

Abstract

The ability of macrocyclic polyethers to activate enolates has been studied in the alkylation of de-oxybenzoin (1) with butyl derivatives nBuY (Y = Br, I, OMes) catalyzed by crown ether PHDB18C6 (7) or cryptand [2.2.2,C10] (8) under phase-transfer catalysis (PTC) and homogeneous (chlorobenzene) conditions. The enolate reactivity is mainly determined by the ligand (cryptand > crown ether) and solvent (increasing with the polarity, in the order: toluene < chlorobenzene < 1,2dichlorobenzene). Regioselectivity of the reaction is also remarkably affected by ligand and alkylating agent.     

Exploring the Reactivity of a Frustrated Sn/P Lewis Pair: The Highly Selective Complexation of the cis-Azobenzene Photoisomer

The reactivity of the geminal frustrated Lewis pair (FLP) (F₅C₂)₃SnCH₂P(tBu)₂ ( 1 ) was explored by reacting it with a variety of small molecules (PhOCN, PhNCS, PhCCH, tBuCCH, H₃CC(O)CH=CH₂, Ph[C(O)]₂Ph, PhN=NPh and Me₃SiCHN₂), featuring polar or non-polar multiple bonds and/or represent α,β-unsaturated systems. While most adducts are formed readily, the binding of azobenzene requires UV-induced photoisomerization, which results in the highly selective complexation of cis-azobenzene. In the case of benzil, the reaction does not lead to the expected 1,2- or 1,4-addition products, but to the non-stereoselective (tBu)₂PCH₂-transfer to a prochiral keto function of benzil. All adducts of 1 were characterised by means of multinuclear NMR spectroscopy, elemental analyses and X-ray diffraction experiments.     

Determination of trace bismuth by under-potential deposition-stripping voltammetry at mesoporous platinum microelectrodes: application to pharmaceutical products

A methodology for the determination of bismuth, based on under-potential deposition-stripping voltammetry (UPD-SV), was investigated. It makes use of mesoporous platinum microelectrodes (Pt-MEs) prepared by a liquid crystal templating technique. The mesoporous microelectrodes, which are characterised by a very high surface area, allowed the accumulation of relatively large amounts of bismuth at under-potential without saturation of the electrode surface. Calibration plots for quantification of bismuth at micromolar levels were constructed by using the charge involved in either the anodic or cathodic peak recoded by cyclic voltammetry that ensued the accumulation of bismuth at the electrode surface. During the anodic scan, the oxidation of metallic bismuth occurred; the cathodic scan involved irreversibly adsorbed bismuth species, which are retained on to the electrode surface. The reproducibility of the proposed UPD-SV procedure (which was within 5 %) was assured by the application to the Pt-MEs of a suitable potential waveform, properly designed to avoid memory effect due to the irreversibly deposited bismuth. The latter phenomenon along with UPD allowed to overcome interference due to copper, which is normally observed when quantification of bismuth is performed by anodic stripping voltammetry at solid electrodes involving bulk metal deposits. The usefulness of the proposed method for the determination of bismuth in real samples was demonstrated by the analysis of a tablet of a pharmaceutical preparation, which is used for curing ulcers.     

Small Targeted Cytotoxics: Current State and Promises from DNA‐Encoded Chemical Libraries

The targeted delivery of potent cytotoxic agents has emerged as a promising strategy for the treatment of cancer and other serious conditions. Traditionally, antibodies against markers of disease have been used as drug‐delivery vehicles. More recently, lower molecular weight ligands have been proposed for the generation of a novel class of targeted cytotoxics with improved properties. Advances in this field crucially rely on efficient methods for the identification and optimization of organic molecules capable of high‐affinity binding and selective recognition of target proteins. The advent of DNA‐encoded chemical libraries allows the construction and screening of compound collections of unprecedented size. In this Review, we survey developments in the field of small ligand‐based targeted cytotoxics and show how innovative library technologies will help develop the drugs of the future.     

Determination of the two major endocannabinoids in human plasma by μ-SPE followed by HPLC-MS/MS

Endocannabinoids (ECs) are endogenous compounds that interact with type-1 and type-2 cannabinoid receptors (CB₁ and CB₂), as well as non-cannabinoid receptors. The multitude of roles attributed to ECs makes them an emerging target of pharmacotherapy for a number of disparate diseases. Here a high-throughput bioanalytical method based on micro SPE (μ-SPE) followed by LC-MS/MS analysis for the simultaneous determination of the two major endocannabinoids 2-arachidonoylglycerol (2-AG) and N-arachidonoylethanolamine (anandamide, AEA) in human plasma is presented. The chromatographic conditions obtained with the fused-core column allowed a good separation in 10 min also of the AG isomers. A very simple and reliable extraction has been optimised by means of C18-modified tips: it requires only 100 μL of plasma and allows the use of minimal volumes of organic solvent. The present method allows a rapid and effective clean-up, which also minimises the isomerisation of 2-AG. The whole procedure has been validated following the FDA guidelines for bioanalytical methods validation: the satisfactory recovery values, the negligible matrix effect and the good values of accuracy and reproducibility make it a simple and high-throughput analytical tool for clinical and biochemical studies on endocannabinoid signaling in humans.

Qualitative interpretation of physico-chemical and isotopic parameters in the Krka River (Croatia) assessed by multivariate statistical analysis

Multivariate statistical analyses were applied on the measured physico-chemical (Cd, Pb, Cu, Zn, Mg, Ca, O₂, alkalinity, temperature, pH, SAS, DOC and DIC) and isotopic parameters (δ¹³C and δ¹⁸O) to estimate and distinguish anthropogenic from natural influences to the water system of the Krka River. Analyses were conducted on the data collected during six years from twelve sampling sites. On the basis of orientation, positioning and grouping of parameters arranged by biplots, four main hypotheses were defined and finally statistically confirmed. Thereof, two main and distinct processes occurring in the Krka River could be highlighted: (i) upstream pollution, caused by the inflow of untreated waste-waters of city of Knin and (ii) downstream self-purification, caused by the sedimentation and/or co-precipitation of pollutants coupled by the inflow of clean subterranean water (groundwater recharge). Grouping of (i) hydrological and carbon cycle connected parameters, and (ii) anthropogenically influenced correlated parameters were proposed as a result of statistical analysis. Regarding the pH, it is shown that a stream section influenced by the subterranean inflow of Zrmanja River is statistically significantly different for all sampling campaigns during six years, being lower for about 0.5 pH unit.     

Reversible Control over Molecular Recognition in Surface‐Bound Photoswitchable Hydrogen‐Bonding Receptors: Towards Read–Write–Erase Molecular Printboards

The synthesis of an anthracene‐bearing photoactive barbituric acid receptor and its subsequent grafting onto azide‐terminated alkanethiol/Au self‐assembled monolayers by using an Cu^I‐catalyzed azide–alkyne reaction is reported. Monolayer characterization using contact‐angle measurements, electrochemistry, and spectroscopic ellipsometry indicate that the monolayer conversion is fast and complete. Irradiation of the receptor leads to photodimerization of the anthracenes, which induces the open‐to‐closed gating of the receptor by blocking access to the binding site. The process is thermally reversible, and polarization‐modulated IR reflection–absorption spectroscopy indicates that photochemical closure and thermal opening of the surface‐bound receptors occur in 70 and 100 % conversion, respectively. Affinity of the open and closed surface‐bound receptor was characterized by using force spectroscopy with a barbituric‐acid‐modified atomic force microscope tip.