Solid-state photodimerization of steroid enones

Androst-4-ene-3,17-dione (1) and 17alpha-methyltestosterone (2) are dimerized in the solid-state by UV radiation. These substances were selected by a search in the CSD among the steroid enones presenting in the crystalline state an intermolecular short contact between a hydrogen alpha to a carbonyl group and the oxygen of an enone system. Dimerization occurs by transfer of the hydrogen to the oxygen and connection between the two involved carbons. Androst-4-ene-3,17-dione (1) affords dimer 3 and trimer 4, both formed by connection of the C-16 of a molecule with the C-3 of a near one. Irradiation of 17alpha-methyltestosterone (2) gives the isomeric trienones 5 and 6. These compounds are reasonably formed by dehydration of unisolated intermediate products 7 and/or 8 obtained by coupling of two molecules through a linkage between the C-2 and the C-3' carbons. The formation mechanisms of the photoproducts are satisfactory explained on the basis of the molecular arrangement of the monomers in the crystal state. Modeling of the dimeric molecules was done using molecular mechanics calculations. A single-crystal X-ray of the dimer of androst-4-ene-3,17-dione confirms the structural interpretation of spectral data. The conformer found in the solid-state agrees well with the results of molecular mechanics calculations.     

Multiple nitrene insertions into metal-sulfur bonds of dithiocarbamate complexes: synthesis of sulfido-amido and zwitterionic tetraamido complexes

The iodine(III) reagent, PhI[double bond, length as m-dash]NTs, acts as a source of the nitrene fragment NTs, which undergoes facile insertion into the metal-sulfur bonds of a range of dithiocarbamate complexes. Addition of two equivalents of PhI=NTs to [M(S(2)CNR2)2] affords sulfido-amido complexes [M{SC(NR2)SNTs}2](M=Ni, Cu), which insert two further nitrene fragments to afford zwitterionic tetraamido complexes [M{TsNSC(NR2)SNTs}2](M=Co, Ni, Cu). Crystallographic studies have been carried out on both types of complex allowing possible resonance hydrids of the new ligand types to be assessed.     

Experimental and theoretical study of the interaction of CO2 with alpha-Al2O3

Density functional molecular cluster calculations are combined with X-ray photoelectron spectroscopy (XPS), quadrupolar mass spectrometry (QMS), and diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy to investigate the interaction of CO2 with alpha-Al2O3 and partially reduced alpha-Al2O3. The electronic structure of the stoichiometric and partially reduced substrate, adsorbate geometries, chemisorption enthalpies, and adsorbate vibrational parameters are computed and discussed. Theoretical results agree quite well with experimental data and previous theoretical investigations. As far as the adsorbate-substrate interaction is concerned, the results of our calculations indicate that CO2 forms bidentate-chelating carbonate species. The bonding scheme of this surface complex implies a significant substrate-->adsorbate transfer of charge (from the occupied dangling bond of a surface Lewis base site into one component of the CO2 2 pi u LUMO) assisted by a definitely weaker adsorbate-->substrate donation (from one component of the CO2 1 pi g HOMO into an empty dangling bond of a surface Lewis acid site). Our estimate of the chemisorption enthalpy (-15 kcal/mol) agrees quantitatively with calorimetric data reported for CO2 adsorbed on high surface area alpha-alumina (-16.0 kcal/mol). [Mao, C.-F.; Vannice, M. A. Appl. Catal. A 1994, 111, 151.] According to XPS and QMS outcomes, theoretical results predict that the interaction of CO2 with partially reduced alpha-Al2O3 gives rise to the reduction of the adsorbate to CO and to the concomitant substrate reoxidation.     

Biologisch aktive 3,3-Dimethylbicyclo[2.2.2]octane: Synthesen in der Isocamphanreihe, 35. Mitt.

Summary The bicyclo[2.2.1]- and [2.2.2]-systems are part of numerous biological active substances. Continuing our syntheses in the isocamphane series the homologous isocamphanes of mecamylamine (1 a) and of the fungicidal bicyclic compound2 were synthesized. Furthermore the syntheses ofE-homoisosantalene (15) andE,E-homoisosantalol (16) are described.

     

Electrokinetic molecular separation in nanoscale fluidic channels

This report presents a study of electrokinetic transport in a series of integrated macro- to nano-fluidic chips that allow for controlled injection of molecular mixtures into high-density arrays of nanochannels. The high-aspect-ratio nanochannels were fabricated on a Si wafer using interferometric lithography and standard semiconductor industry processes, and are capped with a transparent Pyrex cover slip to allow for experimental observations. Confocal laser scanning microscopy was used to examine the electrokinetic transport of a negatively charged dye (Alexa 488) and a neutral dye (rhodamine B) within nanochannels that varied in width from 35 to 200 nm with electric field strengths equal to or below 2000 V m-1. In the negatively charged channels, nanoconfinement and interactions between the respective solutes and channel walls give rise to higher electroosmotic velocities for the negatively charged dye than for the neutral dye, towards the negative electrode, resulting in an anomalous separation that occurs over a relatively short distance (<1 mm). Increasing the channel widths leads to a switch in the electroosmotic transport behavior observed in microscale channels, where neutral molecules move faster because the negatively charged molecules are slowed by the electrophoretic drag. Thus a clear distinction between "nano-" and "microfluidic" regimes is established. We present an analytical model that accounts for the electrokinetic transport and adsorption (of the neutral dye) at the channel walls, and is in good agreement with the experimental data. The observed effects have potential for use in new nano-separation technologies.     

Reductive opening of the thiazolidine ring. Selective N-methylation of cysteamines

The reaction of thiazolidines 2 and 7 with borane was investigated. It gave N-methylcysteamines 3 and 8 through thiazolidine ring opening. Sodium borohydride and lithium aluminum hydride were ineffective.     

Mathematical model for the analytical signal of an herbicide sensor based on the reaction centre of Rhodobacter sphaeroides

This paper introduces a mathematical model which makes it possible both to determine the concentration of photosynthetic herbicides and to obtain a quantitative parameter in order to compare their activity using a previously described sensing system. The working principle involves the changes in absorption properties at 860 nm of the reaction centre (RC) isolated from the bacteria Rhodobacter sphaeroides when photosynthetic herbicides are present. The method has been used for the determination and activity comparison of five photosynthetic herbicides: diuron, atrazine, terbutryn, terbuthylazine and simazine. Detection limits obtained were 2.2, 0.75, 0.046, 0.25, and 1.4 μM, respectively. The resulting order for the different herbicides according to their action on RC was: terbutryn > terbuthylazine > atrazine > simazine > diuron.     

U-4C-3CR versus U-5C-4CR and stereochemical outcomes using suitable bicyclic β-amino acid derivatives as bifunctional components in the Ugi reaction

Intramolecular Ugi reactions with bicyclic β-amino acids have been performed and the effects of the configuration and N-alkylation have been studied. We have proven that preferential ring contraction or nucleophilic attack by the solvent depend not only on the presence of N-alkylation but also on the relative disposition of the carboxyl group and the amine. Excellent results in terms of stereoselectivity have been obtained in the case of N-alkyl-3-exo-amino-7-oxabicyclo[2.2.1]-2-endo-carboxylic acids.     

Synthesis of mixed metal decaosmium carbido clusters: The X-ray structures of the monoanions [Os10C(CO)24Cu(NCMe)]− and [Os10C(CO)24AuPPh3]−

The high nuclearity mixed metal cluster monoanions [Os₁₀C(CO)₂₄Cu(NCMe)]^? (I) and [Os₁₀C(CO)₂₄AuPPh₃]^? (II) have been obtained by reaction of the carbido-dianion [Os₁₀C(CO)₂₄]^2? (III) with one equivalent of [Cu(NCMe)₄] [BF₄] and Ph₃PAuCl, respectively, in CH₂Cl₂. X-ray analysis of the [PPh₃Me]⁺ salts of I and II show that the Cu and Au ligands have added to capping tetrahedra of the dianion III in μ₃- and μ₂-bridging positions, respectively.     

Determination of gamma-hydroxybutyric acid in human urine by capillary electrophoresis with indirect UV detection and confirmation with electrospray ionization ion-trap mass spectrometry

γ-Hydroxybutyric acid (GHB), a minor metabolite or precursor of γ-aminobutyric acid (GABA), acts as a neurotransmitter/neuromodulator via binding to GABA receptors and to specific presynaptic GHB receptors. Based upon the stimulatory effects, GHB is widely abused. Thus, there is great interest in monitoring GHB in body fluids and tissues. We have developed an assay for urinary GHB that is based upon liquid–liquid extraction and capillary zone electrophoresis (CZE) with indirect UV absorption detection. The background electrolyte is composed of 4 mM nicotinic acid (compound for indirect detection), 3 mM spermine (reversal of electroosmosis) and histidine (added to reach a pH of 6.2). Having a 50 μm I.D. capillary of 40 cm effective length, 1-octanesulfonic acid as internal standard, solute detection at 214 nm and a diluted urine with a conductivity of 2.4 mS/cm, GHB concentrations ≥2 μg/ml can be detected. Limit of detection (LOD) and limit of quantitation (LOQ) were determined to be dependent on urine concentration and varied between 2–24 and 5–60 μg/ml, respectively. Data obtained suggest that LOD and LOQ (both in μg/ml) can be estimated with the relationships 0.83 κ and 2.1 κ, respectively, where κ is the conductivity of the urine in mS/cm. The assay was successfully applied to urines collected after administration of 25 mg sodium GHB/kg body mass. Negative electrospray ionization ion-trap tandem mass spectrometry was used to confirm the presence of GHB in the urinary extract via selected reaction monitoring of the m/z 103.1→m/z 85.1 precursor–product ion transition. Independent of urine concentration, this approach meets the urinary cut-off level of 10 μg/ml that is required for recognition of the presence of exogenous GHB. Furthermore, data obtained with injection of plain or diluted urine indicate that CZE could be used to rapidly recognize GHB amounts (in μg/ml) that are ≥ 4 κ.