二维混合区域的中子碰撞概率的计算

本文对由长方形或三角形栅元组成的反应堆栅格,从碰撞概率定义出发,建立了二维多体系统的中子首次碰撞概率计算的公式,并将计算结果与蒙特卡洛方法的计算结果进行了比较。     

GaAs/AlGaAs量子阱材料的X射线形貌及其发光性能

本文介绍了用X射线双品形貌术研究MBE生长的GaAs/AlGaAs量子阱材料中的生长缺陷、位错及其对发光性能的影响。同时研究了低温下MBE生长的GaAs/AlGaAs量子阱材料的正交方向的位错。在有应变超品格过渡层高温生长的量子阱材料中,位错及光致发光性能有明显的改善。     

HgCdTe材料应用与制备的进展

HgCdTe是一种有广泛应用前景的Ⅱ-Ⅵ族化合物半导体光电材料。从投资上看,它已为仅次于Si和GaAs的第三种最重要的半导体。HgCdTe是制作红外探测器的最佳材料。本文简要地介绍了HsCdTe材料的性质以及它的应用和制备进展,着重描述了在红外探测器上的应用。对制备HgCdTe单晶的各种工艺方法作了比较说明,较详细地介绍了滑动液相外延(LPE)制备HgCdTe单晶薄膜技术。     

透射光栅的实验标定和衍射效率的理论模拟

透射光栅广泛应用于软X射线能谱测量.为了获得用于惯性约束聚变研究的透射光栅的各级衍射效率及其他参数,在北京同步辐射源上200—1600 eV能量范围内对其进行了标定,获得了透射光栅衍射效率的实验结果.扩展了透射光栅衍射效率的计算方法,提出了7边准梯形截面衍射效率计算模型.分析拟合了实验数据,理论结果与实验结果很好符合.得到了7边准梯形的透射光栅栅线截面结构. 关键词： 透射光栅 衍射效率 实验标定 光栅模型     

自聚焦透镜高效批量加工的双面研磨抛光法研究

依据双面研磨抛光原理,提出了加工自聚焦透镜平面和斜面辅助工装设计.从工艺技术特点和生产实际过程等方面对设计的工装使用情况进行分析验证.多次大批量加工实践证明,该辅助工装的设计完全满足了自聚焦透镜高效批量加工技术要求,简化整个生产线工艺,减少工艺流程时间,降低材辅料的消耗成本,从而验证了双面研磨抛光法是一种实用的加工自聚焦透镜的新方法.     

光纤环形镜线形腔掺Er3+光纤激光器输出特性的数值分析

在分析光纤环形镜工作原理的基础上,给出了基于光纤环形镜的线形腔掺Er3+光纤激光器相位和幅度的振荡条件.通过求解速率方程,理论分析了其输出特性,获得了稳态条件下激光器输出功率、阈值泵浦功率和斜率效率的解析表达式.推导出激光器工作所需掺Er3+光纤最短长度,并在给定泵浦光功率时,在特定输出波长上获得最大输出功率所需最佳掺Er3+光纤长度的表达式,且通过实验进行了验证.     

Two-pump fiber optical parametric amplifiers using optimized photonic crystal fiber by genetic algorithm

In this paper, we investigate the gain spectra of fiber optical parametric amplifiers (FOPAs) consisting of dispersion-flattened fibers (DFFs) with different dispersion curves comparatively by means of the dispersion curve model of the DFFs. It is demonstrated that the broader gain spectrum of FOPAs can be achieved if the dispersion curve is lower and more flattened. Based on the preceding analyses, we propose to constitute FOPAs by using index-guiding photonic crystal fiber (PCF) with an anticipated ultra-flattened dispersion and ultra-low dispersion slope. The as-proposed PCF had different air-holes in the cladding rings. In total, four parameters of the PCF are optimized by using genetic algorithm. PACS 42.81.-i; 42.65.Hw; 42.65.Yj     

Quantum noise property in coherent atomic system

The coherent superposition of atomic states leads to the characteristic change of interacting lights because of the coupling between the lights and atoms. In this paper, the noise spectrum of the quantified light interacting with the atoms is studied under the condition of electromagnetically induced transparency (EIT). It is shown that the noise spectrum displays a double M-shape noise profile resulted from the conversion of phase noise of probe beam. A squeezing of 0.3 dB can be observed at the detuning of probe light at the proper parameters of atoms and coupling beam.     

钐(Ⅱ)类卡宾CH_3SmCH_2X(X=Cl、Br和Ⅰ)促进乙烯环丙烷化反应途径的理论研究(英文)

用密度泛函B3LYP方法研究了过渡金属钐类卡宾与乙烯的环丙烷化反应的机理。对三种不同的钐的SS试剂CH_3SmCH_2X(其中X=Cl、Br和Ⅰ)分别和CH_2CH_2反应的各反应物、中间体、过渡态和产物构型的全部结构几何参数进行了优化,用内禀反应坐标(IRC)计算和频率分析方法,对过渡态进行了验证。结果表明：CH_3SmCH_2X(其中X=Cl、Br和Ⅰ)与CH_2CH_2环丙烷化反应按亚甲基转移通道(通道A)和卡宾金属化通道(通道B)都可以进行,与锂类卡宾的反应机理相同,只是按亚甲基转移通道(通道A)进行反应较容易一些,而且此反应在较低的温度下就可以发生。     

The Quantum Coherence Effects in Degenerate Two-level Atomic System

The quantum coherence effects of the transition Fe = 2←→Fg = 3 depending on the polarization of the coupling and probe beam are observed in a Cs vapor cell. The splitting of electromagnetically induced transparency （EIT） window is observed when the degeneracy of two-level system is broken using a magnetic field. It is also shown that the splitted transparency points of two of three windows are shifted with the intensity of magnetic field （ i. e. Zeeman splitting in the upper and lower levels ） increasing. On the contrary, when we fix the intensity of magnetic field, and increase the Rabi frequency of the coupling beam, the splitted transparency peaks become wider. A qualitative agreement between experiment and theory is found.