Reverse micellar aggregates: effect on ketone reduction. 2. Surfactant role

Kinetics of the reduction of 3-chloroacetophenone (CAF) with sodium borohydride (NaBH(4)) were followed by UV-vis spectroscopy at 27.0 degrees C in different reverse micellar media, toluene/BHDC/water and toluene/AOT/water, and compared with results in an isooctane/AOT/water reverse micellar system. AOT is sodium 1,4-bis-2-ethylhexylsulfosuccinate, and BHDC is benzyl-n-hexadecyl dimethylammonium chloride. The kinetic profiles were investigated as a function of variables such as surfactant and NaBH(4) concentration and the amount of water dispersed in the reverse micelles, W(0) = [H(2)O]/[surfactant]. In all cases, the first-order rate constant, k(obs), increases with the concentration of surfactant as a consequence of incorporating the substrate into the interface of the reverse micelles where the reaction takes place. The reaction is faster at the cationic interface than at the anionic one probably because the negative ion BH(4)(-) is part of the cationic interface. The effect of the external solvent on the reaction shows that reduction is favored in the isooctane/AOT/water reverse micellar system than that with an aromatic solvent. This is probably due to BH(4)(-) being more in the water pool of the toluene/AOT/water reverse micellar system. The kinetic profile upon water addition depends largely on the type of interface. In the BHDC system, k(obs) increases with W(0) in the whole range studied while in AOT the kinetic profile has a maximum at W(0) approximately 5, probably reflecting the fact that BH(4)(-) is part of the cationic interface while, in the anionic one, there is a strong interaction between water and the polar headgroup of AOT below W(0) = 5 and, above that, BH(4)(-) is repelled from the interface once the water pool has formed. Application of a kinetic model based on the pseudophase formalism, which considers the distribution of the ketone between the continuous medium and the interface and assumes that reaction takes place only at the interface, has enabled us to estimate rate constants at the interface of the reverse micellar systems. At W(0) < 10, it was considered that NaBH(4) is wholly at the interface and, at W(0) >/= 10, where there are free water molecules, also the partitioning between the interface and the water pool was taken into account. The results were used to evaluate CAF and NaBH(4) distribution constants between the different pseudophases as well as the second-order reaction rate constant of the reduction reaction in the micellar interface.     

A fluorimetric assay for cortisol

A simple, rapid and sensitive fluorimetric assay for the quantitative determination of cortisol is reported. The assay is based on the formation of a fluorescent dye when cortisol is incubated with a mixture of sulfuric acid and acetic acid. The fluorescence spectrum recorded for the resulting dye shows a maximum extinction at 475 nm and a maximum emission at 525 nm. The solvent 2-methyl-4-pentanone was used for extraction and was found to act as a fluorescence amplifier. A limit of detection of 2.7 μM was achieved, making it possible to forego solvent evaporation. The assay suffers minor interference from 11-deoxycortisol which exhibits low fluorescence at λ _ex: 460 nm; λ _em: 505 nm. Typical standard deviations were below 4%. We validated the assay using a biotransformation with recombinant Schizosaccharomyces pombe which regioselectively hydroxylates 11-deoxycortisol to cortisol. The method described herein is suitable for preliminary screening of microorganisms capable of steroid hydroxylation.     

Single molecular multianalyte sensor: jewel pendant ligand

[structure: see text] The jewel pendant ligand has multiple chromogenic units combined in a single molecule with the dyes linked to a semiselective binding site by three heteroatoms (O, N, S) having different HSAB characteristics, to indicate diverse response to individual transition metal ions. Using a single-molecular multianalyte sensor, multiple analytes could be determined with a minimal sensing system.     

Comparative resin kinetics using in situ fluorescence measurements

The aminolysis of a novel activated ester resin was utilized for kinetic study via continuous in situ fluorescence measurements. A variety of resin compositions (polystyrene, JandaJel, ArgoPore, TentaGel, NovaGel, and PEGA) and solvents (dimethylformamide, acetonitrile, tetrahydrofuran, 1,2-dichlorethane, and toluene) were tested to compare their effects on the reaction rate. A linear relationship between the reaction rate and (solvent polarity x swelling of resin) was elucidated for the aminolysis reaction.     

Nordesferriferrithiocin. Comparative Coordination Chemistry of a Prospective Therapeutic Iron Chelating Agent(1)

Nordesferriferrithiocin, NDFFTH(2), is a derivative of the siderophore desferriferrithiocin, DFFTH(2), in which the methyl group is substituted by a hydrogen atom. Both compounds show high oral activity as possible drugs for the treatment of iron overload. While DFFTH(2) is significantly toxic, NDFFTH(2) exhibits a lower toxicity and offers a much better therapeutic window than other orally active iron chelators. In this study, complexes of DFFTH(2) and NDFFTH(2) with various trivalent metals have been synthesized and characterized. Five isomers (the maximum possible) have been observed in the case of [Co(DFFT)(2)](-) in solution, as proved by (1)H-NMR measurements. Although normally labile, complexes of Al(3+) ([Al(DFFT)(2)](-)) have been separated by HPLC. In general, DFFTH(2) forms kinetically inert complexes whereas complexes of NDFFTH(2) tend to isomerize quickly in solution, as indicated by CD spectroscopy of separated HPLC fractions of [Cr(NDFFT)(2)](-). The most stable isomers of the aluminum complexes of both ligands have been characterized by X-ray crystallography; K[Al(DFFT)(2)] crystallizes from methanol/diethyl ether in the orthorhombic space group P2(1)2(1)2 with a = 11.238(3) ?, b = 31.719(11) ?, c = 7.684(2) ?, V = 2739.2(24) ?(3), and Z = 4. This isomer has the mer-(N,O-Lambda)(S,S) configuration, while K[Al(NDFFT)(2)] crystallizes from methanol/diethyl ether in the space group P6(1) (a = 21.269(8) ?, c = 9.643(3) ?, V = 3777.8(42) ?(3), Z = 6) and has the same coordination geometry. The solution thermodynamics of the Al(3+), Ga(3+), and Fe(3+) complexes have been studied by spectrophotometric titration. The stability constants (log K) are 23.6(1), 29.2(3), and 31.04(3), respectively, for the DFFTH(2) complexes and 22.0(1), 27.8(2), and 29.09(3), respectively, for the NDFFTH(2) complexes. Cyclic voltammograms of both iron complexes have been recorded in water at a carbon disk working electrode and in DMF at a graphite working electrode. The reduction waves measured in DMF indicate no reversibility whereas in water a quasi-reversible reduction is observed. The reduction potentials (E(1/2)'s) in water are -166 mV for [Fe(DFFT)(2)](-) and -97 mV for [Fe(NDFFT)(2)](-) versus NHE. These potentials are well in the range for biological reductants, which makes possible an in vivo reduction mechanism for the iron removal from the siderophore.     

The complex of a bivalent derivative of galanthamine with torpedo acetylcholinesterase displays drastic deformation of the active-site gorge: implications for structure-based drug design

Bifunctional derivatives of the alkaloid galanthamine, designed to interact with both the active site of the enzyme acetylcholinesterase (AChE) and its peripheral cation binding site, have been assayed with Torpedo californica AChE (TcAChE), and the three-dimensional structures of their complexes with the enzyme have been solved by X-ray crystallography. Differences were noted between the IC(50) values obtained for TcAChE and those for Electrophorus electricus AChE. These differences are ascribed to sequence differences in one or two residues lining the active-site gorge of the enzyme. The binding of one of the inhibitors disrupts the native conformation of one wall of the gorge, formed by the loop Trp279-Phe290. It is proposed that flexibility of this loop may permit the binding of inhibitors such as galanthamine, which are too bulky to penetrate the narrow neck of the gorge formed by Tyr121 and Phe330 as seen in the crystal structure.     

Synthesis of 1,4-polyisoprene support of 2-chloroethylphosphonic acid (ethephon), a stimulating compound for the latex production by the Hevea brasiliensis

2-Chloroethylphosphonic acid (ethephon) is a well known stimulating product used to improve the latex production by the rubber tree (Hevea brasiliensis). Its chemical fixation in side position of 1,4-polyisoprene chains by weak chemical bond was considered in order to prepare new derivatives having prolonged stimulating activity. The synthesis was considered by using a chemical modification procedure according to a two-step process. Firstly, an epoxidized 1,4-polyisoprene intermediate was prepared by partial epoxidation of 1,4-polyisoprene. Secondly, the grafting of 2-chloroethylphosphonic acid was achieved by using the reactivity of the P-OH acidic function (or a P-OSiMe₃ derived from P-OH) of the reagent toward oxirane rings of epoxidized 1,4-polyisoprene. It was noted that grafting yields are improved when the reaction is carried out in bulk or in a non-polar solvent, and more especially in neutral conditions, that is by replacing ethephon with its trimethylsilylated derivatives [monotrimethylsilyl 2-chloroethylphosphonic acid or, more especially, di(trimethysilyl) 2-chloroethylphosphonate]. With this latter, the addition occurs by the intermediate of the P-OSiMe₃ bond, and the formation of 2-oxo-l,3,2-dioxaphospholane structures is highly favored.     

Effect of OH internal torsion on the OH-stretching spectrum of cis,cis-HOONO

We show that a simple two-dimensional vibrational model can explain most of the features observed in the first and second OH-stretching overtone region of the room temperature cis,cis-HOONO spectrum. The model uses ab initio calculated parameters and includes the OH-stretching mode coupled to the internal torsion of the OH group.     

Novel open-chain and cyclic conformationally constrained (R)- and (S)-α,α-disubstituted tyrosine analogues

A series of novel open-chain and cyclic conformationally constrained (R)- and (S)-α,α-disubstituted tyrosine analogues 1a–e were synthesized in good yields and high optical purities (Schemes 1 and 2). The absolute configurations of these tyrosine analogues were unambiguously determined based on the X-ray structures of the precursor diastereoisomeric peptides of type 4 and 5 . Four of these structures are described (Figs. 1–4), showing β-turn type-I geometries for dipeptides 4a, 5b , and 4c and an extended conformation for peptide 5c (Table 3). The conversion of the free amino acids 1a–c into suitably protected building blocks 11a–d and 15d,e for peptide synthesis is discussed (Schemes 3 and 4).