Synthesis and NMR studies of (13)C-labeled vitamin D metabolites

Isotope-labeled drug molecules may be useful for probing by NMR spectroscopy the conformation of ligand associated with biological hosts such as membranes and proteins. Triple-labeled [7,9,19-(13)C(3)]-vitamin D(3) (56), its 25-hydroxylated and 1 alpha,25-dihydroxylated metabolites (58 and 68, respectively), and other labeled materials have been synthesized via coupling of [9-(13)C]-Grundmann's ketone 39 or its protected 25-hydroxy derivative 43 with labeled A ring enyne fragments 25 or 26. The labeled CD-ring fragment 39 was prepared by a sequence involving Grignard addition of [(13)C]-methylmagnesium iodide to Grundmann's enone 28, oxidative cleavage, functional group modifications leading to seco-iodide 38, and finally a kinetic enolate S(N)2 cycloalkylation. The C-7,19 double labeling of the A-ring enyne was achieved by the Corey-Fuchs/Wittig processes on keto aldehyde 11. By employing these labeled fragments in the Wilson-Mazur route, the C-7,9,19 triple-(13)C-labeled metabolites 56, 58, and 68 as well as other (13)C-labeled metabolites have been prepared. In an initial NMR investigation of one of the labeled metabolites prepared in this study, namely [7,9,19-(13)C(3)]-25-hydroxyvitamin D(3) (58), the three (13)C-labeled carbons of the otherwise water insoluble steroid could be clearly detected by (13)C NMR analysis at 0.1 mM in a mixture of CD(3)OD/D(2)O (60/40) or in aqueous dimethylcyclodextrin solution and at 2 mM in 20 mM sodium dodecyl sulfate (SDS) aqueous micellar solution. In the SDS micellar solution, a double half-filter NOESY experiment revealed that the distance between the H(19Z) and H(7) protons is significantly shorter than that of the corresponding distance calculated from the solid state (X-ray) structure of the free ligand. The NMR data in micelles reveals that 58 exists essentially completely in the alpha-conformer with the 3 beta-hydroxyl equatorially oriented, just as in the solid state. The shortened distance (H(19Z))-H(7)) in micellar solutions as compared to that in the solid state is most easily rationalized on the basis that the 5(10)-torsion angle in 58 is decreased in micellar solutions as compared to that in the solid state.     

Synthesis of corroles bearing up to three different meso substituents

[reaction: see text] We have developed a new method that affords regioisomerically pure corroles possessing up to three different substituents at the meso positions. The corrole formation reaction involves the acid-catalyzed condensation of a dipyrromethane-dicarbinol with pyrrole followed by oxidation with DDQ. ABC-Type corroles were synthesized for the first time according to this procedure.     

Effects of partial/asymmetrical filling of micelles and chiral selectors on capillary electrophoresis enantiomeric separation: generation of a gradient

The effect of several experimental parameters on enantiomeric separations in micellar capillary electrophoresis (MCE) was studied. A model separation system was tested. It was composed of an acidic phosphate buffer with sodium dodecyl sulfate (SDS) and hydroxypropyl-beta-cyclodextrin (HP-beta-CD) as the chiral selector. A substituted angelicin was used as a chiral analyte. Changes in the concentration of SDS micelles/SDS monomers in the presence of HP-beta-CD and their impact on the enantioselective separation were investigated. Variation of the composition of electrolytes in the individual compartments of the separation system (inlet vial, capillary, and outlet vial) affected both the migration times and the resolution of the enantiomers. Current vs. time dependencies also were monitored during the separations. A mathematical model of electromigration in micellar systems with chiral selector present was proposed and a computer simulation was used to explain the observed phenomena and to confirm the generation of a CD/SDS-micelle concentration gradient under certain experimental conditions. This is the reported first attempt of a computer simulation of the complex, dynamic chiral environment of the CD-SDS-MCE system.     

Reverse micellar aggregates: effect on ketone reduction. 2. Surfactant role

Kinetics of the reduction of 3-chloroacetophenone (CAF) with sodium borohydride (NaBH(4)) were followed by UV-vis spectroscopy at 27.0 degrees C in different reverse micellar media, toluene/BHDC/water and toluene/AOT/water, and compared with results in an isooctane/AOT/water reverse micellar system. AOT is sodium 1,4-bis-2-ethylhexylsulfosuccinate, and BHDC is benzyl-n-hexadecyl dimethylammonium chloride. The kinetic profiles were investigated as a function of variables such as surfactant and NaBH(4) concentration and the amount of water dispersed in the reverse micelles, W(0) = [H(2)O]/[surfactant]. In all cases, the first-order rate constant, k(obs), increases with the concentration of surfactant as a consequence of incorporating the substrate into the interface of the reverse micelles where the reaction takes place. The reaction is faster at the cationic interface than at the anionic one probably because the negative ion BH(4)(-) is part of the cationic interface. The effect of the external solvent on the reaction shows that reduction is favored in the isooctane/AOT/water reverse micellar system than that with an aromatic solvent. This is probably due to BH(4)(-) being more in the water pool of the toluene/AOT/water reverse micellar system. The kinetic profile upon water addition depends largely on the type of interface. In the BHDC system, k(obs) increases with W(0) in the whole range studied while in AOT the kinetic profile has a maximum at W(0) approximately 5, probably reflecting the fact that BH(4)(-) is part of the cationic interface while, in the anionic one, there is a strong interaction between water and the polar headgroup of AOT below W(0) = 5 and, above that, BH(4)(-) is repelled from the interface once the water pool has formed. Application of a kinetic model based on the pseudophase formalism, which considers the distribution of the ketone between the continuous medium and the interface and assumes that reaction takes place only at the interface, has enabled us to estimate rate constants at the interface of the reverse micellar systems. At W(0) < 10, it was considered that NaBH(4) is wholly at the interface and, at W(0) >/= 10, where there are free water molecules, also the partitioning between the interface and the water pool was taken into account. The results were used to evaluate CAF and NaBH(4) distribution constants between the different pseudophases as well as the second-order reaction rate constant of the reduction reaction in the micellar interface.     

Synthesis of (1R,4R,7S)- and (1S,4S,7S)-2-(4-tolylsulfonyl)-5-phenyl-methyl-7-methyl-2,5-diazabicyclo[2.2.1]heptanes via regioselective opening of 3,4-epoxy-d-proline with lithium dimethyl cuprate

The synthesis of (1S,4S,7S)- and (1R,4R,7S)-2-(4-tolylsulfonyl>5-phenylmethyl-7-rnethyl-2,5-diazabicyclo-[2.2.1]heptanes ( 20 ) and ( 22 ) from trans 4-hydroxy-L-proline is described.     

First principles and experimental 1H NMR signatures of solvated ions: The case of HCl(aq).

A combined experimental and ab initio study is presented of the 1H NMR chemical shift distribution of aqueous hydrogen chloride solution as a function of acid concentration, based on Car-Parrinello molecular dynamics simulations and fully periodic NMR chemical-shift calculations. The agreement of computed and experimental spectra is very good. From first-principles calculations, we can show that the individual contributions of Eigen and Zundel ions, regular water molecules, and the chlorine solvation shell to the NMR line are very distinct and almost independent of the acid concentration. From the computed instantaneous NMR distributions, it is further possible to characterize the average variation in hydrogen-bond strength of the different complexes.     

A fluorimetric assay for cortisol

A simple, rapid and sensitive fluorimetric assay for the quantitative determination of cortisol is reported. The assay is based on the formation of a fluorescent dye when cortisol is incubated with a mixture of sulfuric acid and acetic acid. The fluorescence spectrum recorded for the resulting dye shows a maximum extinction at 475 nm and a maximum emission at 525 nm. The solvent 2-methyl-4-pentanone was used for extraction and was found to act as a fluorescence amplifier. A limit of detection of 2.7 μM was achieved, making it possible to forego solvent evaporation. The assay suffers minor interference from 11-deoxycortisol which exhibits low fluorescence at λ _ex: 460 nm; λ _em: 505 nm. Typical standard deviations were below 4%. We validated the assay using a biotransformation with recombinant Schizosaccharomyces pombe which regioselectively hydroxylates 11-deoxycortisol to cortisol. The method described herein is suitable for preliminary screening of microorganisms capable of steroid hydroxylation.     

Single molecular multianalyte sensor: jewel pendant ligand

[structure: see text] The jewel pendant ligand has multiple chromogenic units combined in a single molecule with the dyes linked to a semiselective binding site by three heteroatoms (O, N, S) having different HSAB characteristics, to indicate diverse response to individual transition metal ions. Using a single-molecular multianalyte sensor, multiple analytes could be determined with a minimal sensing system.     

Comparative resin kinetics using in situ fluorescence measurements

The aminolysis of a novel activated ester resin was utilized for kinetic study via continuous in situ fluorescence measurements. A variety of resin compositions (polystyrene, JandaJel, ArgoPore, TentaGel, NovaGel, and PEGA) and solvents (dimethylformamide, acetonitrile, tetrahydrofuran, 1,2-dichlorethane, and toluene) were tested to compare their effects on the reaction rate. A linear relationship between the reaction rate and (solvent polarity x swelling of resin) was elucidated for the aminolysis reaction.     

Application of the pKa rule to synthesize salts of bezafibrate

ABSTRACT

Co-crystallization frequently employs forces such as hydrogen bonds, halogen bonds, and π-π stacking to assemble molecules in a multi-component crystal. In an effort to increase the strength of the intermolecular interaction between the anti-cholesterol drug bezafibrate (BEZA), a wastewater contaminant, and hydrogen-bond-acceptor molecules, we modified the pK_a values of the acceptors. Here, we describe the first series of salts incorporating BEZA and achieve a variety of supramolecular architectures including discrete assemblies, 1D chains, tapes, and 2D sheets. We discuss exceptions to the pK_a rule, and demonstrate that the presence of hydrogen-bond-donor atoms on the acceptor molecule supports salt formation.