Statistical treatment of proficiency testing data

 There are three stages to evaluating a laboratory's results in an interlaboratory proficiency test: establishing the correct result for the test item, determining an evaluation statistic for the particular result, and establishing an acceptable range. There are a wide variety of procedures for accomplishing these three stages and a correspondingly wide variety of statistical techniques in use. Currently in North America the largest number of laboratory proficiency test programs are in the clinical laboratory field, followed by programs for environmental laboratories that test drinking water and waste water. Proficiency testing in both of these fields is under the jurisdiction of the federal government and other regulatory and accreditation agencies. Many of the statistical procedures are specified in the regulations, to assure comparability of different programs and a fair evaluation of performance. In this article statistical procedures recommended in International Organization for Standardization Guide 43, Part 1, are discussed and compared with current practices in North America. Received: 22 April 1998 · Accepted: 12 May 1998     

One-pot tethering of organic molecules through non-symmetric malonate derivatives

A new method for one-pot chemoselective heterobifunctional cross-linking of organic molecules is described. The method is based on tert-butyldiphenylsilyl malonate and involves two sequential carbodiimide couplings with two different molecules possessing a hydroxy or an amino functionality with one intermediate one-pot fluoride deprotection.     

A multitechnique surface analytical study of a segmented block copolymer poly(ether-urethane) modified through an H2O radio frequency glow discharge

Recent work in our laboratories has fully characterized the surface region of a segmented poly(ether-urethane) (PEU) extending from the air/polymer interfacial region through bulk depths in the micron range. This characterization utilized energy and angle dependent Electron Spectroscopy for Chemical Analysis (ESCA), Attenuated Total Reflectance–Fourier Transform Infrared Spectroscopy (ATR–FTIR), and Comprehensive Wettability Profiling (contact angle using a homologous series of liquids) as defined by Zisman. In this study this same multi-analytical-technique approach is used to elucidate changes in these PEU surfaces induced through an H₂O Radio Frequency Glow Discharge (RFGD) plasma. This investigation reports both qualitative and quantitative changes due to the modification treatments as well as the permanency of the changes effected on these surfaces through the plasma treatment. From our analyses, the amount of surface residing polyurethane (hard segment) is observed to increase due to a proposed plasma etching mechanism. Further, the addition of oxygen containing functionality is detected at the modified surfaces unique with respect to the unmodified PEU. These surface modifications which show large increases in wettability, are finally observed to be semi-permanent over a time period of 6 months.     

Photocatalytic synthesis of copper colloids from CuII by the ferrihydrite core of ferritin

The iron-storage protein ferritin encapsulates a nanoparticle of iron oxide. The size and properties of these nanoparticles can be adjusted by controlled oxidative hydrolysis reactions of Fe(II). This mineralized ferritin protein cage has previously been shown to act as an effective photocatalyst for reduction of Cr(VI). In the present work, we demonstrate that Fe(O)OH-mineralized ferritin catalyzes the photoreduction of Cu(II) to form a stable, air-sensitive, colloidal dispersion of Cu(0). In addition, the particle sizes of the Cu colloids can be controlled by varying the ratio of Cu(II) to ferritin. This illustrates an important principle, namely that the properties of one preformed material can be utilized for the specific synthesis of a second material, thus tailoring the desired physical properties of the final products. This procedure represents a multistep materials synthesis: the formation of a new nanomaterial from a catalytic precursor.     

Interesting fluorescence properties of C60-centered dendritic adduct with twelve symmetrically attached pyrenes

A C60-centered dendritic adduct with 12 symmetrically attached pyrene species was synthesized and found to have relatively simple fluorescence emission kinetics, in particular, the mono-exponential decay of the significant pyrene excimer emission.     

In situ Fe K-edge X-ray absorption fine structure of a nitrosyl adduct of iron phthalocyanine irreversibly adsorbed on a high area carbon electrode in an acidic electrolyte

Key aspects of the microenvironment surrounding the Fe center in the nitrosyl adduct of iron phthalocyanine, [Fe(Pc)(NO)], have been elucidated from the analysis of the Fe K-edge extended X-ray absorption fine structure (EXAFS) of the material adsorbed on the surface of a high area carbon electrode recorded in situ, in 0.5 M H(2)SO(4). Statistical best fits to the EXAFS data place the Fe center in a five-coordinated square pyramidal configuration shifted away from the Pc plane toward the axially bound NO bent at an angle of ca. 40 degrees with respect to the normal to the Pc plane. This environment is analogous to that of Fe in the nitrosyl adduct of crystalline [Fe(TPP)], where TPP = meso-tetraphenylporphyrinato(2-), determined from X-ray diffraction.     

Aggregation and reactivity of the cesium enolate of 6-phenyl-alpha-tetralone: comparison with the lithium enolate

The cesium enolate of 6-phenyl-alpha-tetralone (CsPAT) has a lambda(max) in THF at about 387 nm, but the variation with concentration is too small for application of singular value decomposition. Proton-transfer studies with several indicators show that CsPAT forms monomer-tetramer mixtures with a tetramerization equilibrium constant, K(1,4) = 2.3 x 10(11) M(-3). The pK of the monomer is 23.39 on a scale where fluorene is assigned 22.9 (per hydrogen). For comparison, the lithium enolate, LiPAT, is also a monomer-tetramer with K(1,4) = 4.7 x 10(10) M(-3) and a monomer pK = 14.22. HMPA in large amounts promotes dissociation to monomer with both enolates. Ion-pair S(N)2 initial rates were measured for CsPAT with several alkyl halides and with methyl tosylate and compared with other rates with LiPAT. In all cases, the enolate monomers are much more reactive than the aggregates. Reaction of CsPAT with alkyl halides is generally C-alkylation but HMPA promotes increasing amounts of O-alkylation. A new indicator, 11-methyl-11H-benzo[b]fluorene, has a pK on the cesium scale of 23.39.     

In situ soft X-ray studies of ethylene oxidation mechanisms and intermediates on the Pt(111) surface

In situ studies of ethylene oxidation on Pt(111) have been performed using a powerful combination of fluorescence yield soft X-ray methods for temperatures up to 600 K and oxygen pressures up to 0.01 Torr. Absolute carbon coverages have been determined both in steady-state and dynamic catalytic conditions on the Pt(111) surface. Fluorescence yield near-edge spectroscopy (FYNES) and temperature-programmed fluorescence yield near-edge spectroscopy (TP-FYNES) experiments above the carbon K edge were used to identify the structure and bonding of the dominant surface species during oxidation. TP-FYNES experiments of preadsorbed ethylene coverages in oxygen pressures up to 0.01 Torr indicate a stable intermediate is formed over the 215-300 K temperature range. By comparing the intensity of the C-H sigma resonance at the magic angle with the intensity in the carbon continuum, the stoichiometry of this intermediate has been determined explicitly. Based on calibration with known C-H stoichiometries, the intermediate has a C(2)H(3) stoichiometry for oxygen pressures up to 0.01 Torr, indicating oxydehydrogenation occurs before skeletal oxidation. FYNES spectra at normal and glancing incidences were performed to characterize the structure and bonding of this intermediate. Using FYNES spectra of ethylene, ethylidyne, and acetylene as reference standard, this procedure indicates the oxidation intermediate is tri-sigma vinyl. Thus, oxidation of ethylene proceeds through a vinyl intermediate, with oxydehydrogenation preceding skeletal oxidation.