Synthesis of 1,4-polyisoprene support of 2-chloroethylphosphonic acid (ethephon), a stimulating compound for the latex production by the Hevea brasiliensis

2-Chloroethylphosphonic acid (ethephon) is a well known stimulating product used to improve the latex production by the rubber tree (Hevea brasiliensis). Its chemical fixation in side position of 1,4-polyisoprene chains by weak chemical bond was considered in order to prepare new derivatives having prolonged stimulating activity. The synthesis was considered by using a chemical modification procedure according to a two-step process. Firstly, an epoxidized 1,4-polyisoprene intermediate was prepared by partial epoxidation of 1,4-polyisoprene. Secondly, the grafting of 2-chloroethylphosphonic acid was achieved by using the reactivity of the P-OH acidic function (or a P-OSiMe₃ derived from P-OH) of the reagent toward oxirane rings of epoxidized 1,4-polyisoprene. It was noted that grafting yields are improved when the reaction is carried out in bulk or in a non-polar solvent, and more especially in neutral conditions, that is by replacing ethephon with its trimethylsilylated derivatives [monotrimethylsilyl 2-chloroethylphosphonic acid or, more especially, di(trimethysilyl) 2-chloroethylphosphonate]. With this latter, the addition occurs by the intermediate of the P-OSiMe₃ bond, and the formation of 2-oxo-l,3,2-dioxaphospholane structures is highly favored.     

Diverse redox-active molecules bearing O-, S-, or Se-terminated tethers for attachment to silicon in studies of molecular information storage

A molecular approach to information storage employs redox-active molecules tethered to an electroactive surface. Attachment of the molecules to electroactive surfaces requires control over the nature of the tether (linker and surface attachment group). We have synthesized a collection of redox-active molecules bearing different linkers and surface anchor groups in free or protected form (hydroxy, mercapto, S-acetylthio, and Se-acetylseleno) for attachment to surfaces such as silicon, germanium, and gold. The molecules exhibit a number of cationic oxidation states, including one (ferrocene), two [zinc(II)porphyrin], three [cobalt(II)porphyrin], or four (lanthanide triple-decker sandwich compound). Electrochemical studies of monolayers of a variety of the redox-active molecules attached to Si(100) electrodes indicate that molecules exhibit a regular mode of attachment (via a Si-X bond, X = O, S, or Se), relatively homogeneous surface organization, and robust reversible electrochemical behavior. The acetyl protecting group undergoes cleavage during the surface deposition process, enabling attachment to silicon via thio or seleno groups without handling free thiols or selenols.     

Zwei neue pentacyclische dimere des cycloheptatriens

Titanium - catalyzed dimerization of cycloheptatriene affords pentacyclo[7.5.0.0^2,8.0^5,14.0^7,11]tetradeca-3,12-diene, $\text{3}$, and pentacyclo[8.4.0.0^3,7.0^4,14.0^6,11]tetradeca-8,12-diene, $\text{4}$. By heating, $\text{3}$ is converted quantitatively into $\text{4}$.     

Henry's law and diffusion constants of vinyl chloride in poly(vinyl chloride) at high temperature

The Henry's law and diffusion constants of vinyl chloride in poly(vinyl chloride) were determined at temperatures of 24, 90, 120, 150, and 170°C for weight fractions of vinyl chloride between 0.2 × 10^?3 and 0.8 × 10^?3. Above 90°C, Henry's law applies; values of the constant increase with temperature from 1.8 × 10² to 5.5 × 10² atm per unit weight fraction of dissolved vinyl chloride. The heat of desorption is about 15 kJ/mole. At 24°C, the nominal Henry's law constant was smaller than would have been obtained by extrapolating the values found at higher temperature. The diffusion constants increase with temperature from about 2 × 10^?13 to 3 × 10^?7 cm²/sec. The activation energy for diffusion is about 110 kJ/mole between 90 and 170°C. Although all values were determined in the absence of air, it is likely that they apply to polymer in air. They may, therefore, be used to calculate the vinyl chloride content in the gas above poly(vinyl chloride) under specific processing conditions.     

Zur Kenntnis der thermischen Zersetzung von Ammoniumhexafluoroscandat,-titanat,-vanadat und-chromat

Thermal analysis supported by kinetic calculations was applied exhaustively to these compounds. Under dynamic conditions, tetrafluorometallates(III), which as intermediates, could not be isolated, for the first three compounds. In each case, the final step was the pure metal(III) fluoride. Ammonium hexafluorochromate(III) decomposed directly to the pure chromium(III) fluoride. The decomposition rate of all compounds slowed down towards the end, probably for kinetic reasons. Polymorphic transitions of ammonium hexafluorotitanate(III) were observed at 35 and 100°C. Ammoniumhexafluoroscandate(III) underwent polymorphic transition at 47°C. The decomposition patterns for all these compounds were similar. Conditions for the preparation of pure ammonium tetrafluorometallates(III) of Sc, Ti and V are described.     

Flow injection analysis for calcium in serum,water and waste waters by spectrophotometry and by ion-selective electrode

The Flow Injection technique is shown to provide fast, reliable and sensitive methods for the determination of calcium in various aqueous as well as serum samples; spectrophotometric or potentiometric detection can be used. At sampling rates of 100–110 samples per hour, with 30-μl sample injections, high reproducibility of measurement and low reagent consumption are achieved in both methods. In the spectrophotometric method, the analytical readout is available within 12 s after sample injection at a total reagent consumption of 0.75 ml per analysis. The potentiometric measurement of the calcium activity in serum is placed on a reliable basis by alternating measurements of serum samples and aqueous standards without incurring any non-reproducible changes in potential between aqueous and serum solutions. This permits the simultaneous determination of pH and pCa, the analytical readout being available within XXX s of sample injection. The good agreement between the results obtained with the Flow Injection method and those attained by atomic absorption and EDTA titrations as well as pCa stat-measurements show that the new methods are potentially suitable for routine analysis.     

Hybridization in some macrocyclic polyacetylenes

The hybridization in several cyclic polyacetylene compounds has been calculated by the maximum overlap method, assuming planar and non-planar geometries of the molecules. In the planar configuration the hybrids describing the molecular skeleton deviate from the corresponding bond directions. We have a few “bent” bonds, but in contrast to the situation in small rings, here the deviation angles are negative, i.e., the hybrids point toward the inside of the ring. Non-planar structures in which acetylene groups are kept in a plane and CCH₂ or CH₂ groups are displaced out of the plane show less deviation from the bond directions of bent bonds. Furthermore, the deviation angles decrease with an increase in the out-of-plane displacement of methylene groups. Finally, when the angle of bending of the molecules approaches 50°, the deviation vanishes, predicting a puckered conformation for the molecules. Correlation between CC stretching vibration frequencies and the corresponding CC bond overlap is discussed.     

Papierchromatographische Trennung und Identifizierung der Polyäthylenglykole und ihrer Monoäther

Zusammenfassung Es wurde eine chromatographische Methode zur Auftrennung und Identifizierung der Polyäthylenglykole und ihrer Monoäther nach Über-führung in die Ester der 3,5-Dinitrobenzoesäure ausgearbeitet. Es wurden entweder Lösungsmittelsysteme mit Dimethylformamid oder Formamid als stationäre und Hexan, Cyklohexan, Benzol, Chloroform und ihre Gemische als mobile Phase oder mit Paraffinöl imprägnierte Papiere und das Gemisch Dimethylformamid—Methylalkohol—Wasser als mobile Phase angewendet.

---

Summary A Chromatographic method has been developed for the separation and identification of the polyethylene glycols and their mono-ethers after conversion into the esters of 3,5-dinitrobenzoic acid. The solvent systems employed consisted of dimethylformamide or formamide as stationary phase and hexane, cyclohexane, benzene, chloroform and their mixtures as mobile phase, or papers impregnated with paraffin oil and the mixture of dimethyl-formamide-methyl alcohol were used as the mobile phase.

---

Résumé On a élaboré une méthode chromatographique de séparation et d'identification des polyéthylèneglycols et de leurs monoéthers après leur transformation en ester de l'acide dinitro-3,5 benzoïque. On a employé soit les systèmes de solvants avec le diméthylformamide ou le formamide comme phase stationnaire, et l'hexane, le cyclohexane, le benzène, le chloroforme et leurs mélanges comme phase mobile, ou des papiers imprégnés d'huile de paraffine et le mélange diméthylformamide-alcool méthylique-eau comme phase mobile.

---

---

Herrn Dipl.-Ing.J. Kami aus unserem Institut danken wir für die Darstellung und Reinigung einiger angewandter Verbindungen.     

Über Reaktionen von Nitrosophenolen, 4. Mitt.: Reaktion von Nitrosonaphtholen mit Naphtholen

Zusammenfassung Die Reaktion von 1-Nitroso-2-naphthol mit 1-und 2-Naphthol sowie die Reaktion von 2-Nitroso-1-naphthol mit 2-Naphthol in Äthanol und in Äther bei Anwesenheit von HNO₃ gibt 5H-Dibenzo[a,j]phenoxazon-(5) (I), 5H-Dibenzo[a,j]phenoxazon-(5)-14-oxid (II), 5H-Dibenzo[a,h]phenoxazon-(5) (III) sowie 5H-Dibenzo[a,h]phenoxazon-(5)-14-oxid (IV). Es wurde ein Reaktionsmechanismus vorgeschlagen und die Konstitution der hergestellten Verbindungen spektrophotometrisch und potentiometrisch bestimmt.

---

The reaction of 1-nitroso-2-naphthol with 2-and 2-naphthol and the reaction of 2-nitroso-1-naphthol with 2-naphthol in ethanol or ether in the presence of nitric acid have been studied. The main reaction products isolated were the dibenzophenoxazones I–IV. The reaction mechanism for their formation is proposed.

---

---

Mit 4 Abbildungen     

The effect of mechanical activation on the thermal decomposition of chalcopyrite

Experimental results on the influence of preliminary mechanical activation on the thermal decomposition of chalcopyrite are presented and discussed. The following experimental facts were found: