Application of partial least-squares regression to the resolution of highly correlated spectra. Simultaneous spectrofluorimetric determination of Al(3+), Ga(3+) and In(3+)

The simultaneous spectrofluorimetric determination of mixtures of aluminium, gallium and indium as their 8-hydroxyquinoline complexes following extraction into chloroform is studied. The high collinearity of the spectra hindered their resolution by multiple linear regression (MLR) methodology; therefore, experimental data were processed by partial least-squares regression (PLSR) methodology. A previous step in the study of three-dimensional fluorescence spectrum is possible to select the best information to quantify this system with high collinearity. Finally the optimal conditions for quantitation, the best data preprocessing procedure and the most suitable spectral mode for calibration were established. Using an external set allowed the three analytes to be determined simultaineously at concentrations below 1 mug ml(-1) with errors less than 10% for aluminium and indium, and 15% for gallium.     

Following the aggregation of amyloid-forming peptides by computer simulations

There is experimental evidence suggesting that the toxicity of neurodegenerative diseases such as Alzheimer's disease may result from the soluble intermediate oligomers. It is therefore important to characterize extensively the early steps of oligomer formation at atomic level. As these structures are metastable and short lived, experimental data are difficult to obtain and they must be complemented with numerical simulations. In this work, we use the activation-relaxation technique coupled with a coarse-grained energy model to study in detail the mechanisms of aggregation of four lys-phe-phe-glu (KFFE) peptides. This is the shortest peptide known to form amyloid fibrils in vitro. Our simulations indicate that four KFFE peptides adopt a variety of oligomeric states (tetramers, trimers, and dimers) with various orientations of the chains in rapid equilibrium. This conformational distribution is consistent with all-atom molecular-dynamics simulations in explicit solvent and is sequence dependent; as seen experimentally, the lys-pro-gly-glu (KPGE) peptides adopt disordered structures in solution. Our unbiased simulations also indicate that the assembly process is much more complex than previously thought and point to intermediate structures which likely are kinetic traps for longer chains.     

About SnF2 stannous fluoride. IV. Kinetics of the α → γ and β, γ → α transitions

The kinetics of the reconstructive first order phase transitions α → γ (upon heating) and β, γ → α (upon cooling) of SnF₂ were studied by quantitative X-ray powder diffraction. The main feature of the kinetics is that these transformations are incomplete over a wide temperature range. Consequently it is not possible to fit the experimental data using the usual solid state rate expressions. Although these transitions are not reversible (large hysteresis) the empirical use of a kinetic model of a reversible transformation provides a good fit. The α → γ transformation was also investigated by D.T.A.; this transition was found to be greatly influenced by particle size: the transition temperature increases with grain size, and its enthalpy decreases. The X-ray investigation revealed that the process of the α → γ transformation involves an intermediate noncrystalline phase named the “transition phase.” It is suggested that the transition proceeds through a process of fragmentation-reconstruction.     

The six-membered annulation reaction involving sequential palladium-catalyzed allylic alkylation and Michael addition: scope and limitations

The palladium-catalyzed condensation of a variety of active methylene compounds with methyl 6-acetoxymethyl-hepta-2,6-dienoate was investigated. The six-membered adducts resulting from a η³ palladium complex alkylation-Michael addition sequence were obtained with moderate to good yields. In some cases, further evolution of the primary adduct was observed. The process has been expanded to access nitrogen heterocycles by using sodium p-toluenesulfonamide as the nucleophilic partner.     

Matrix-assisted laser desorption/ionisation mass spectrometry for the direct analysis of enzymatically digested kappa- iota- and hybrid iota/nu-carrageenans

Enzymatically digested oligosaccharides of kappa-, iota- and hybrid iota/nu-carrageenans were analysed using matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry in the negative-ion mode. nor-Harmane was used as matrix. Depending on the stock concentration and the laser intensity applied, the oligosaccharides exhibited losses of sulphate units (neutralised by the Na+ ion, and thus non-stable), leaving the primary backbone structure in most cases with only the deprotonated sulphate groups (carrying the negative charge, stable). This meant that kappa- and iota-oligosaccharides could not be easily distinguished from one another since they share the same primary backbone structure. However, for the hybrid iota/nu-oligosaccharides the primary backbone structure could be identified since the nu-carrageenan repeating unit differs from that of the kappa/iota-carrageenan unit. For all types of oligosaccharides, the results indicated cleavage of an anhydrogalactose unit from the non-reducing end. Specifically, for the hybrid oligosaccharides of iota/nu-carrageenans, this type of fragmentation means that the nu-carrageenan unit is not positioned on the non-reducing end of the hybrid oligosaccharides. Dehydration reactions, and exchange reactions of Na+ with K+ and Ca2+, were also observed.     

Lithium diorganocuprate reactions with l-serine derivatives

The lithium diorganocuprate reactions with L-serine derivatives are studied. Retention of configuration, or at least a high enantiomeric excess (>80%) of the formed α-amino esters is observed in all cases. Attempts are made to restrict side-reactions.     

Optimization,validation and comparison of various extraction techniques for the trace determination of polycyclic aromatic hydrocarbons in sewage sludges by liquid chromatography coupled to diode-array and fluorescence detection

There is a need for a better characterization of sludges from wastewater treatment plants which are destined to be spread on agricultural lands. Inorganic pollutants are regularly controlled but organic pollutants have received few attention up to now. On this paper, we have been interested on the analysis of the 16 polycyclic aromatic hydrocarbons (PAHs) listed in the US Environmental Protection Agency (US EPA) priority list and more particularly of the six PAHs listed in the European community list (fluoranthene, benzo[b and k]fluoranthene, benzo[a]pyrene, benzo[ghi]perylene, indeno[1,2,3-cd]pyrene). The analysis step consists on liquid chromatography with both fluorescence and UV detections as described in the EPA Method 8310. As for the extraction step, several techniques such as supercritical fluid extraction, pressurized liquid extraction, focused microwave extraction in open vessels, Soxhlet and ultrasonic extractions are compared after optimization of the experimental conditions (solvent nature and quantity, temperature, pressure, duration, ... ) and validation with certified sludges. When optimized, these five extraction techniques are as much efficient with similar relative standard deviation. Whatever the extraction techniques used, the whole analysis protocol permits to quantify PAHs in the range of 0.09 to 0.9 mg/kg of dried sludges.     

An Absence of Non-specific Immune Response towards para-Sulphonato-calix[n]arenes

The effects of para-Sulphonato-calix[4]arene, para-Sulphonato-calix[6]arene and para-Sulphonato-calix[8]arene on the activation of NADPH oxidase in neutrophils has been studied. All three molecules do not induce NADPH oxidase activation, and hence do not stimulate neutrophils. Measurement of cell viability demonstrates that these three water-soluble calix[n]arene derivatives are not cytotoxic.     

Development of an analytical procedure for determination of selected estrogens and progestagens in water samples

An analytical procedure has been developed for determination of eight selected natural and synthetic hormonal steroids in surface water and in effluent samples. Several methodological points have been investigated and are discussed; they include the choice of the solid-phase extraction sorbent, the influence of flow rate on recovery, the breakthrough volume for a given sorbent (Env+ and Oasis HLB), sample clean up, and sample storage. As regards the latter point, it was found that when no preservative was added to effluent from a sewage-treatment plant, severe loss of steroids occurred—85% of progesterone and about 30% of both estrone and estradiol were found to be degraded in 24 h. The procedure developed was applied to samples from the Seine river estuary. Sex steroids were not detected in surface water; estrone was the most commonly detected steroid in sewage-treatment plant effluent, with levels ranging from 1.8 to 8.3 ng L^–1. Synthetic estrogens (ethynylestradiol and mestranol) and progestagens (levonorgestrel and norethindrone) were never detected, whatever the sampling season. Overall, for 162 out of 168 measurements levels were below the detection limits of the developed procedure.