Sonochemical coating of magnetite nanoparticles with silica

Magnetite nanoparticles were coated with silica through the hydrolysis and condensation of tetraethyl orthosilicate (TEOS) under ultrasonic irradiation. The ultrasonic irradiation was used to prevent the agglomeration of the magnetite particles and accelerate the hydrolysis and condensation of TEOS. TEM, DLS, XRF, VSM, TG and sedimentation test were used to characterize the silica-coated magnetite particles. The dispersibility of silica-coated magnetite particles in aqueous solution was improved significantly and the agglomerate particle size was decreased to 110 nm. It was found that the agglomerate particle size of silica-coated magnetite particles was mainly decided by the coating temperature and the pH value in the silica-coating process. The weight ratio of silica in silica-coated magnetite particles was mainly decided by the pH value in the silica-coating process. The dispersibility of silica-coated magnetite particles was mainly decided by the agglomerate particle size of the suspension. The oxidation of magnetite particles in air was limited through the coated silica. The magnetism of silica-coated magnetite particles decreased slightly after silica-coating.     

Rationally Designing Molecularly Imprinted Polymer Toward a High Specific Adsorbent by Using Metal as Assembled Pivot

This article presents an original work aimed at rationally designing molecularly imprinted polymer (MIP) toward a high specific adsorbent. Assembling with cobalt as the pivot, the MIP was prepared by coordinating polymerizable monomers around an inducible template. The use of pivot obviously plays a positive role on increasing the specificity of MIP, so as to adsorb more for the template and less for its analogue. Related studies indicate that these may be a result of increasing specific interaction, which makes the MIP capable of recognizing the imprint species. Further information from thermodynamic analysis reveals that the increasing specific interaction, in logic, can be due to a higher fidelity of imprint, which specifically allures the template to bind.     

环己烷1,2-二甲酸二异壬酯增塑剂的气相色谱-质谱分析

建立了气相色谱-质谱联用法定性和定量分析塑料中环己烷1,2-二甲酸二异壬酯(DINCH)的方法。考察了DINCH分子离子的质谱断裂过程,并建立了快速鉴定塑料中DINCH的理论方法。通过对不同溶剂提取效率的对比,采用二氯甲烷作为最佳提取溶剂。在优化条件下,该方法的线性范围为0.24～1.60 mg/L,相关系数为0.998,定量下限(S/N=10)为1.2 mg/kg。在加标水平为80～400 mg/kg时,4种不同塑料(PE、PP、PU、PVC)的回收率和相对标准偏差分别为82%～113%和1.1%～9.0%。将该方法用于实际塑料样品的检测,结果满意。     

Porous V2O5-SnO2/CNTs composites as high performance cathode materials for lithium-ion batteries

Vanadium pentoxide (V₂O₅) exhibits high theoretical capacities when used as a cathode in lithium ion batteries (LIBs), but its application is limited by its structural instability as well as its low lithium and electronic conductivities. A porous composite of V₂O₅-SnO₂/carbon nanotubes (CNTs) was prepared by a hydrothermal method and followed by thermal treatment. The small particles of V₂O₅, their porous structure and the coexistence of SnO₂ and CNTs can all facilitate the diffusion rates of the electrons and lithium ions. Electrochemical impedance spectra indicated higher ionic and electric conductivities, as compared to commercial V₂O₅. The V₂O₅-SnO₂/CNTs composite gave a reversible discharge capacity of 198 mAh·g^?1 at the voltage range of 2.05–4.0 V, measured at a current rate of 200 mA·g^?1, while that of the commercial V₂O₅ was only 88 mAh·g^?1, demonstrating that the porous V₂O₅-SnO₂/CNTs composite is a promising candidate for high-performance lithium secondary batteries.     

Photodynamic Tumor Eradication With a Novel Targetable Photosensitizer: Strong Vascular Effects and Dependence on Treatment Repetition Versus Potentiation

A novel pyropheophorbide‐a (PPa) derivative, Ac‐sPPp, was developed in our lab for targeted photodynamic therapy (PDT) and combination therapies. Its versatile peptide moiety, high water‐solubility, amphiphilicity, and micellar aggregation allow efficient coupling to targeting moieties and convenient mixing with other therapeutics. Photosensitizer immunoconjugate (PIC) targeted PDT, using Ac‐sPPp conjugated to therapeutic anti‐epidermal growth factor receptor (EGFR) antibody cetuximab, and PDT + chemotherapy combination treatment, using Ac‐sPPp mixed with stealth liposomal doxorubicin (Doxil), were investigated as promising strategies for potentiating PDT and improving target specificity. Passively targeted PDT with Ac‐sPPp only or surfactant‐solubilized PPa was also investigated for comparison. The A‐431 human vulvar squamous cell carcinoma, xenografted in nude mice, was chosen as a tumor model because of its high EGFR expression and sensitivity to liposomal doxorubicin in vitro. Fluorescence imaging and PDT experiments showed that Ac‐sPPp formulations circulated far longer and provided superior tumor contrast and superior tumor control compared to PPa. Strong PDT vascular effects were observed by laser Doppler imaging regardless of whether Ac‐sPPp was passively or actively targeted. Passively targeted Ac‐sPPp PDT gave equivalent or better tumor control than PIC‐targeted PDT or PDT + Doxil combination therapy, and when treatments were repeated, it also yielded the highest cure rate.     

Improved staining of phosphoproteins with high sensitivity in polyacrylamide gels using Stains‐All

An improved Stains‐All (ISA) staining method for phosphoproteins in SDS‐PAGE was described. Down to 0.5–1 ng phosphoproteins (α‐casein, β‐casein, or phosvitin) can be successfully selectively detected by ISA stain, which is approximately 120‐fold higher than that of original Stains‐All stain, but is similar to that of commonly used Pro‐Q Diamond stain. Furthermore, unlike the original Stains‐All protocol that was time consuming and light unstable, ISA stain could be completed within 60 min without resorting to protect the gels from light during the whole staining procedure. According to the results, it is concluded that ISA stain is a rapid, sensitive, specific, and economic staining method for a broad application to the research of phosphoproteins.