Microwave photonics reconfigurable mixer based on polarization modulator

A reconfigurable and stable mixer is proposed and demonstrated in this paper. It mainly consists of a dual-driven Mach–Zehnder modulator and a polarization modulator with several polarization controllers (PC) and polarizers (Pol). According to the theoretical analysis, different functions (such as single ended mixer, balanced mixer, I/Q mixer and image rejection mixer) can be realized by adjusting the PCs and Pols. The simulation results verify the possibility of multi-functions that realized by the reconfigurable mixer. In addition, another research on how the non-ideal parameters affect the image rejection ratio (ISR) and conversion efficiency of the mixer is also carried. The results show that both of them perform better as the extinction ratio gets higher. However, they are incurring a sharp decrease if the DC bias points deviate from the settled values. In the meantime, the results also indicate that the higher modulation indices lead to a better ISR. A 57.12 dB ISR can be achieved with conversion efficiency of ? 9.53 dB.     

High precision Zernike modal gray map reconstruction for liquid crystal corrector

This paper proposes a new Zernike modal gray map reconstruction algorithm used in the nematic liquid crystal adaptive optics system. Firstly, the new modal algorithm is described. Secondly, a single loop correction experiment was conducted, and it showed that the modal method has a higher precision in gray map reconstruction than the widely used slope method. Finally, the contrast close-loop correction experiment was conducted to correct static aberration in the laboratory. The experimental results showed that the average peak to valley (PV) and root mean square (RMS) of the wavefront corrected by mode method were reduced from 2.501\lambda (\lambda =633~nm) and 0.610\lambda to 0.0334\lambda and 0.00845\lambda , respectively. The corrected PV and RMS were much smaller than those of 0.173\lambda and 0.048\lambda by slope method. The Strehl ratio and modulation transfer function of the system corrected by mode method were much closer to diffraction limit than with slope method. These results indicate that the mode method can take good advantage of the large number of pixels of the liquid crystal corrector to realize high correction precision.     

ZnS thin film deposited with chemical bath deposition process directed by different stirring speeds

In this combined film thickness, scanning electron microscopy (SEM), X-ray diffraction and optical properties study, we explore the effects of different stirring speeds on the growth and optical properties of ZnS film deposited by CBD method. From the disclosed changes of thickness of ZnS film, we conclude that film thickness is independent of the stirring speeds in the heterogeneous process (deposition time less than 40 min), but increases with the stirring speeds and/or deposition time increasing in the homogeneous process. Grazing incident X-ray diffraction (GIXRD) and the study of optical properties disclosed that the ZnS films grown with different stirring speeds show partially crystallized film and exhibit good transmittance (70-88% in the visible region), but the stirring speeds cannot give much effects on the structure and optical properties in the homogeneous process.     

Even and Odd Charge Coherent States: Higher-Order Nonclassical Properties and Generation Scheme

We examine the higher-order nonclassical properties of the even and odd charge coherent states as well as proposing a scheme to generate these states whose modes can freely travel in open space. We show that the even and odd charge coherent states exhibit both higher-order antibunching and higher-order squeezing. While the two-mode higher-order antibunching occurs in any order and essentially depends on the charge number, the two-mode higher-order squeezing appears only in the even orders. We also prove that these states are genuinely entangled, and they can be generated by means of cross-Kerr media, beam splitters, phase shifts and threshold detectors. We find that the fidelity and the corresponding success probability to generate these states are dependent on the correlative parameters.     

Theoretical Studies on the Fe-M Interactions and 31P NMR in Fe(CO)3(EtPhPpy)2MX2 (X=NCS, SCN, Cl; M=Zn, Cd, Hg)

采用密度泛函理论PBE0方法,计算了单核配合物[Fe(CO)3(EtPhPpy)2] (1)、双核配合物[Fe(CO)3(EtPhPpy)2M(NCS)2] (2:M=Zn,3: M=Cd,4: M=Hg) 和[Fe(CO)3(EtPhPpy)2CdX2] (5:X=Cl,6: X=SCN)的几何构型和电子结构,研究了Fe-M相互作用及其对31P化学位移的影响. 结果表明：配合物的稳定性(S)为S(2)>S(3)>S(4),S(3)≈S(6)>S(5).在[Fe(CO)3(EtPhPpy)2CdX2]体系中,含[SCN]-配合物的稳定性大于含Cl-的. Fe-M相互作用的强度(I )顺序为I (2)≈I (3)相似文献   

热重分析技术研究聚-α-甲基苯乙烯降解温度

采用热重分析技术研究了4种聚-α-甲基苯乙烯原料和其它微球壳层材料的热降解温度。研究表明,聚-α-甲基苯乙烯原料主要失重温度范围为220～340℃,等离子体辉光放电涂层材料的降解温度为350～450℃。升温速率在20℃/min和30℃/min时,降解温度基本相同,升温速率不影响降解的温度范围,低于20℃/min时,随着升温速率升高,降解温度升高。     

New Deformation of Para-Bose Statistics

We propose commutation relations for a single mode -deformed para-Bose oscillator. In this new deformation of para-Bose statistics the distribution function has the same form as in the para-Bose statistics. Furthermore, we show analogies between the coherent states of -deformed and q-deformed para-Bose statistics.     

二维红外相关光谱研究熟度对肌原纤维蛋白构象的影响

熟度是指牛排烹煮到可食用的程度,是影响牛排的适口性和消费者满意度的重要因素.肌原纤维蛋白是肌肉中一类重要的盐溶性结构蛋白群,其热凝胶特性与肉品品质密切相关.加热是使生肉变熟的关键工艺,近年来,国内外在加热过程对肌原纤维蛋白凝胶特性及其结构变化影响方面开展了广泛的研究,但在熟度对牛肉蛋白结构影响研究方面却鲜有报道.为了探...     

面向天基引力波探测的时间延迟干涉技术

时间延迟干涉技术(Time-delay?Interferometry,TDI)对中国引力波探测项目及其它天基激光精密测量任务具有重要的参考价值.在天基引力波探测任务中,需利用激光干涉仪对无拖曳检验质量块间实现十皮米量级的位移测量精度.其中,激光源频率噪声和时钟频率噪声是两项主要噪声.在欧洲主导的LISA(Laser?I...