Surface roughness investigation of semi-conductor wafers

Conventionally, surface roughness is predominantly determined through the use of stylus instruments. However, there are certain limitations involved in the method, particularly when a test specimen, such as a silicon wafer, has a smooth mirror-like surface. Hence, it is necessary to explore alternative non-contact techniques. Light scattering has recently been gaining popularity as an optical technique to provide prompt and precise inspection of surface roughness. In this paper, the total integrated scattering (TIS) model is modified to retrieve parameters on surface micro-topography through light scattering. The applicability of the proposed modified TIS model is studied and compared with an atomic force microscope. Experimental results obtained show that the proposed technique is highly accurate for measuring surface roughness in the nanometer range.     

Low-energy ion-assisted control of interfacial structures in metallic multilayers

A molecular dynamics method has been used to simulate the argon ion-assisted deposition of Cu/Co/Cu multilayers and to explore ion beam assistance strategies that can be used during or after the growth of each layer to control interfacial structures. A low-argon ion energy of 5–10 eV was found to minimize a combination of interfacial roughness and interlayer mixing (alloying) during the ion-assisted deposition of multilayers. However, complete flattening with simultaneous ion assistance could not be achieved without some mixing between the layers when a constant ion energy approach was used. It was found that multilayers with lower interfacial roughness and intermixing could be grown either by modulating the ion energy during the growth of each metal layer or by utilizing ion assistance only after the completion of each layers deposition. In these latter approaches, relatively high-energy ions could be used since the interface is buried and less susceptible to intermixing. The interlayer mixing dependence upon the thickness of the over layer has been determined as a function of ion energy.     

Synthesis and characterization of norbornene–ethylene–styrene terpolymers with a substituted ansa‐fluorenylamidodimethyltitanium‐based catalyst

This article reports a synthetic method for a norbornene–ethylene–styrene (N‐E‐S) terpolymer, which has not been well investigated so far, via incorporation of styrene (S) into vinyl‐type norbornene–ethylene (N‐E) copolymers catalyzed by a substituted ansa‐fluorenylamidodimethyltitanium [Me₂Si(3,6‐tBu₂Flu)(tBuN)]TiMe₂ catalyst ( I ) activated with a [Ph₃C][B(C₆F₅)₄]/Al(iBu)₃ cocatalyst at room temperature in toluene. The resulting terpolymerization product contained the targeted N‐E‐S terpolymer and the contaminated homopolymers, which were then able to be completely removed by solvent fractionation techniques. While homopolystyrene was easily extracted by fractionation with methylethylketone as a soluble part, homopolyethylene and a trace amount of homopolynorbornene could be perfectly separated by fractionation with chloroform as insoluble parts. The detail characterizations of a chloroform‐soluble polymer with gel permeation chromatography, nuclear magnetic resonance, and differential scanning calorimetry analyses proved that it contained a true N‐E‐S terpolymer with long N‐E sequences incorporated with isolated or short styrene sequences. The homogeneity of the morphology together with a single glass transition temperature that proportionally decreased with the increase of the styrene contents indicated that the N‐E‐S terpolymer obtained in this work is a random polymer with an amorphous structure. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2765–2773, 2007     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

Anticancer agent development: X-ray crystal structure and keto-enol tautomerism of dimethyl 1-hydroxy-6,7-methylenedioxy-4-(3′,4′,5′-trimethoxyphenyl-trans-3,4-dihydronaphthalene-2,3-dicarboxylate

Structural and conformational information obtained from the crystal structure and solution¹H nmr investigations of the title compound are compared. The 4-aryltetralone, C₂₄H₂₄O₁₀, crystallizes as a chloroform solvate in the monoclinic space group, P2₁/n, witha=12.519(4),b=17.938(6),c=12.534(9)Å,=111.90(5)°, and D_calc=1.51 g cm^–3 forZ=4. The data for this compound were collected at –150°C. Least-squares refinement of 2796 observed [F _o5(F _o)] reflections led to the final agreement index ofR=0.062. A threefold static disorder was observed for one of the carboxyl groups. The second carboxyl group participates in an intramolecular hydrogen bond and is thus ordered. The¹H nmr spectrum revealed the title compound to exist as a keto-enol tautomeric mixture in solution. Vicinal hydrogen coupling constant analysis proved reliable in ascertaining B-ring stereochemistry of 2,3-disubstituted-4-aryltetralones.     

Pu（^7Fg）＋H2（X^1∑g^＋,0,0）的分子反应动力学

基于PuH_2分子基态(X~7A_1)的分析势能函数，用准经典的Monte-Carlo轨线法 对Pu(~7Fg)+H_2(X~1∑_g~+，0，0)的分子反应动力学过程进行了计算。结果表明 ：Pu(~7F_g)与H_2(X~1∑_g~+，0，0)碰撞是弹性碰撞。     

SiO_2负载钼催化剂的合成及其催化乙烯二聚、同系化和歧化的反应性能

从单核及双核二甲胺钼络合物出发,制备了SiO_2负载的钼催化剂。程序升温分解实验(TPDE)及红外测试表明,双核钼络合物与SiO_2作用生成双钼中心物种,此物种可催化乙烯的二聚反应。280℃活化后此双钼中心物种变成单钼中心物种,单钼物种只催化乙烯的同系化及歧化反应。     

Durch Bromierung ausgelöste Umlagerung tertiärer Allylalkohole: Der Einfluss eines Fluor-Substituenten auf Reaktionsgeschwindigkeit und Reaktionsverlauf

Rearrangement of Tertiary Allyl Alcohols Induced by Bromination: The Effect of a Fluorine Substituent on the Rate and the Outcome of the Reaction The allyl alcohol bearing a methyl and a t-butyl group at the hydroxylated position was found to undergo a rearrangement when treated with bromine (or N-bromosuccinimide) in an aqueous medium and to afford a product mixture containing two regioisomeric ketones and one oxirane. Introduction of an additional methyl group or a fluorine atom at the non-terminal olefinic center led to a more selective discrimination between potential migratory groups. As the result of an exclusive t-butyl shift only one product, a ketone, was formed in both cases. Whereas the reaction rate was only slightly affected by the additional methyl group, it was substantially decreased by the fluorine atom.