Enhanced fluorescence from arrays of nanoholes in a gold film

Arrays of sub-wavelength holes (nanoholes) in gold films were used as a substrate for enhanced fluorescence spectroscopy. Seven arrays of nanoholes with distinct periodicities (distances between the holes) were fabricated. The arrays were then spin-coated with polystyrene films containing different concentrations of the fluorescent dye oxazine 720. The dye was excited via resonant extraordinary transmission of the laser source through the nanoholes. Enhanced fluorescence was observed when the geometric characteristics of the arrays allowed for an enhancement in the transmitted excitation. This enhancement occurred via surface plasmon excitation by the laser and a consequential increase in the local electromagnetic field in a sub-wavelength region at the metal-film interface. It was demonstrated that the sensitivity of the fluorescence measurement (change in signal vs change in dye concentration in the polymer film) is significantly larger at the surface plasmon resonance conditions than that obtained from equivalent films on glass substrates. Enhancement factors for the fluorescence emission were calculated for each array, with a maximum enhancement of close to 2 orders of magnitude as compared to the emission of films on glass. The results presented here indicate that arrays of nanoholes are interesting substrates for the development of fluorescence sensors based on surface plasmon resonance, as they provide a platform that allows both spatial confinement and enhancement of excitation light. Moreover, the collinear characteristics of the present optical setup, due to the resonant extraordinary transmission through the nanohole arrays, are more conducive to miniaturization and chip integration than more traditional experimental geometries.     

Reactions of dimethyldivinylsilane,dimethyldivinyltin and allyltrimethyltin with diethylene (tertiary) phosphine)platinum complexes

The compounds [Pt(C₂H₄)₂(PR₃)] [PR₃ = P-tBu₂Me, P(C₆H₁₁)₃, PPh₃] react dimethyldivinylsilane or dimethyldivinyltin to give chelate complexes [Pt{(CH₂CH)₂MMe₂} (PR₃)] (M = Si or Sn). allyltrimethyltin reacts with various diethylene (tertiary phosphine)platinum compounds with cleavage of the allyl group to afford complexes [Pt(SnMe₃)(η³-C₃H₅)(PR₂)]. The NMR spectra (¹³C, ¹H and ³¹P) of the new compounds have been recorded, and the data are discussed in terms of the structures proposed.     

Double cyclisation of phenylglycine-o-carboxylic acids—I: New stable mesoionic oxazolones

Remarkably stable mesoionic oxazolones possessing an oxazolo[3,2-a]quinolinium structure (5a–b),8,16, 17) were obtained by the double cyclisation of phenylglycine-o-carboxylic acids (3a–c) in refluxing acetic anhydride or in benzoic anhydride at 140°, The 0-Ac group was eliminated to give the corresponding lactones (6a–b) or replaced by O-Ts (7). IR stretching vibrations of the endo-carbonyl were in the range 1710–1768 cm^?1, while v_1-CH exhibited unusually high values (3159–3194 cm^-1). 1-Acyl derivatives could be obtained only with TFAA (23–24), although easy deuteration of the same position took place in the presence of traces of trifluoroacetic acid. Hydrolysis of 5b led to the α-quinolone-N-acetic acid 27a. In the case of 5a, hydrolysis was accompanied by self-acylation of the nucleophilic site at C-4 with formation of a dimeric acid 28a. The presence of an additional Me group in phenylalanine-o-carboxylic acid (36) activates the corresponding mesoionic oxazolone 37 so that 1-acylation becomes possible with formation of the fused oxazole 38 by the Dakin-West reaction. Temperature dependent magnetic non-equivalence of methylene protons has been observed in acids 3b-d and f and also in the 7-membered anhydride 48b.     

PMR-Spektren einiger Alkoxy-9-chlor-6-nitroacridine

The spectra of some 9-chloro-6-nitroacridines with methoxy substituents in position 1,4; 2,4; 3,4; 2,3; and ethoxy substituents in positions 1, 2, 3, were recorded. The influence of electron releasing alkoxy groups and electron withdrawing nitro groups on chemical shifts of protons in the 9-chloroacridinic cycle was discussed and PMR parameters were determined, comparatively with those of acridine and 9-chloroacridine. Good agreement between calculated and experimental values is observed. The spectrum of 9-chloro-1,2,3-triethoxyacridine shows for the four protons of the ringC. (H-5, H-6, H-7, H-8) anAMNX coupling pattern whose parameters were determined.     

玉米芯水溶性多糖的分离纯化和抗凝血活性研究

从玉米芯中提取到水提水溶性粗多糖,通过乙醇分级、冻融、凝胶过滤层析,生物测定导向等手段,分离到一种能延长体外凝血时间,而且具有外源抗凝血功能的多糖CCⅢ.CCⅢ对活化部分凝血酶原时间(APTT)无显著影响,但可显著延长体外抗凝血时间(PT).将CCⅢ纯化,经糖组成分析、甲基化、高碘酸氧化、Smith降解和GC-MS分析,确定该多糖结构为:β-(1→4)Glc,(1→3)Xyl构成主链,Glc在6-O处有分枝.平均每10个糖残基有1个分枝,支链由β-(1→3)Xyl,(1→3)Glc构成.     

Microstructure determination of poly-(1,3-pentadiene) by a combination of infrared, 60-MHz NMR, 300-MHz NMR,and X-ray diffraction spectroscopy

A quantitative procedure has been developed for characterizing the complete microstructure of polymers of 1,3-pentadiene, including the tacticity of any crystalline component. This can be accomplished by a combination of infrared spectroscopy, X-ray crystallinity, and 300-MHz NMR spectroscopy. A series of high structural purity polymers were synthesized with a series of previously unreported mixed microstructures. These samples were characterized by using the three techniques mentioned, including the previously unreported 300-MHz NMR data. With those results a 60-MHz NMR/IR method of spectroscopy was developed to determine the composition of poly(1,3-pentadiene)s in terms of percent cis-1,2-, cis-1,4-, trans-1,4-, and 3,4-pentadiene units.     

Synthesis of a simplified bryostatin C-ring analogue that binds to the CRD2 of human PKC-alpha and construction of a novel BC-analogue by an unusual Julia olefination process

[structure: see text] The synthesis of two truncated bryostatin analogues 2 and 3 is described. High-field NMR measurements on the C-ring analogue 3 in C(2)H(3)CN containing 25% (2)H(2)O have shown that it binds to the CRD2 of human PKC-alpha at virtually the same position as phorbol-13-acetate (PA) and bryostatin 1 (1). NMR titration studies have also revealed that 3 binds to the CRD2 with a potency similar in magnitude to PA but much less potently than 1.     

Mono-cyclopentadienyl complexes of lanthanum: synthesis and characterization of anilido derivatives

Use of the bulky cyclopentadienyl ligand [η⁵-C₅H₂(SiMe₃)₃-1,2,4]⁻ (Cp?) allows for the isolation of monomeric, mono-ring lanthanide species. As previously reported, (Cp?)K reacts with LaI₃(THF)₄ (THF=tetrahydrofuran) in THF/pyridine to form the mono-ring complex (Cp?)LaI₂(py)₃ (1) (py=pyridine); a minor product of this reaction is the bis-ring species (Cp?)₂LaI(py) (2). The solid state structure of 2 reveals a monomeric compound containing a pseudo-tetrahedral metal center exhibiting no unusual intramolecular contacts. Addition of one equiv of KNHAr (Ar=2,6-ⁱPr₂C₆H₃) to complex 1 in THF generates the mono-anilido compound (Cp?)LaI(NHAr)(THF)₂ (3), which may be converted to the more stable pyridine adduct (Cp?)LaI(NHAr)(py)₂ (4) by the addition of pyridine to 3. An X-ray crystal structure of 3 indicated a trigonal bipyramidal metal center with the anilido group oriented trans to the iodide atom (N1-La1-I1=123.1(3)°). A structural study on the bis-pyridine adduct 4 revealed a similar C_s-symmetric structure with a slightly increased N_anilido-La-I angle of 132.1(2)°. Addition of KNHAr to the di-iodo bipyridine adduct (Cp?)LaI₂(bipy)(py) (5), in which the two iodide atoms are cis-disposed, yields the mono-anilido complex (Cp?)LaI(NHAr)(bipy)(py) (6) (bipy=2,2^′-bipyridine); this compound may also be prepared by the addition of bipy to (Cp?)LaI(NHAr)(py)₂ (4). An X-ray diffraction study shows that the lanthanum center in 6 is octahedrally coordinated by a Cp? ring, an iodide, an anilido group, a pyridine molecule and two nitrogens of a bipy molecule. In this case, the anilido moiety and the iodide ligand are arranged in a cis fashion (N_anilido-La-I=111.2(2)°), resulting in a complex with C₁ symmetry. Both (Cp?)LaI(NHAr)(py)₂ (4) and (Cp?)LaI(NHAr)(bipy)(py) (6) are inactive as catalysts for the hydroamination/cyclization of 2-amino-hex-5-ene.     

The oscillation frequency of a quartz resonator in contact with liquid

A simple relationship is derived which expresses the change in oscillation frequency of a quartz crystal in contact with a fluid in terms of material parameters of the fluid and the quartz. The relationship is Δf = ?f^{$\text{3}\text{2}$}₀(η_L?_L/πμ_Q?_Q)^{$\text{1}\text{2}$}, where f₀ is the oscillation frequency of the free (dry) crystal, η_L and ?_L are the absolute viscosity and density of the liquid, respectively, and μ_Q and ?_Q are the elastic modulus and density of the quartz. This relation is obtained from a simple physical model which couples the shear wave in the quartz to a damped shear wave in the fluid. Quantitative comparisons with two test cases, aqueous solutions of glucose and ethanol at various concentrations, demonstrate the accuracy of this model.     

High-throughput screening of enzyme libraries: thiolactonases evolved by fluorescence-activated sorting of single cells in emulsion compartments

Single bacterial cells, each expressing a different library variant, were compartmentalized in aqueous droplets of water-in-oil (w/o) emulsions, thus maintaining a linkage between a plasmid-borne gene, the encoded enzyme variant, and the fluorescent product this enzyme may generate. Conversion into a double, water-in-oil-in-water (w/o/w) emulsion enabled the sorting of these compartments by FACS, as well as the isolation of living bacteria cells and their enzyme-coding genes. We demonstrate the directed evolution of new enzyme variants by screening >10(7) serum paraoxonase (PON1) mutants, to yield 100-fold improvements in thiolactonase activity. In vitro compartmentalization (IVC) of single cells, each carrying >10(4) enzyme molecules, in a volume of <10 femtoliter (fl), enabled detection and selection despite the fast, spontaneous hydrolysis of the substrate, the very low initial thiolactonase activity of PON1, and the use of difusable fluorescent products.