Spectrophotometric Determination of Some Phenolic Antibiotics in Dosage Forms

 A simple and sensitive spectrophotometric method is described for the determination of some phenolic antibiotics namely: cefadroxil, amoxicillin and vancomycin. The method is based on the measurement of the orange yellow species produced when the drugs are coupled with diazotized benzocaine in triethylamine medium. The method is applicable over the range of 0.8–12 μg/ml for cefadroxil, 2–16 μg/ml for amoxicillin and 2–18 μg/ml for vancomycin. The formed compounds absorb at 455 nm for both cefadroxil and amoxicillin and at 442 nm for vancomycin. The proposed method has detection limits of 0.018 μg for cefadroxil, 0.0034 μg for amoxicillin and 0.0156 μg for vancomycin. The stoichiometric ratio for the studied compounds was found to be 1:1 and a proposal of the reaction pathway was made. The proposed method was applied for the analysis of the cited drugs in their pharmaceutical preparations. The results are in good agreement with those obtained by the official methods. Received February 7, 2000. Revision June 14, 2000.     

Anti-HIV Active Naphthyl Analogues of HEPT and DABO

Summary.  5-Isopropyl-6-naphthyl uracil and 5-isopropyl-6-naphthyl-2-thiouracil were alkylated to give N-1-(ethoxymethyl and methylthiomethyl) uracil and S²-cyclohexyl-thiouracil, respectively. 5-Ethyl-6-naphthyl uracil and 5-ethyl-6-naphthyl-2-thiouracil afforded N-1-(ethoxymethyl, methoxy-methyl, methylthiomethyl, acetoxyethoxy methyl and hydroxyethoxy methyl) uracil and S²-((2,2- diethoxyethyl), methoxycarbonylmethyl, ethoxycarbonylpropyl, methylthiomethyl, ethoxymethyl, methyl and cyclohexyl)-thiouracil upon alkylation. Received September 25, 2001. Accepted (revised) December 3, 2001     

Molecular structure of an alkyl-side-chain polymer-water interface: origins of contact angle hysteresis

A new and direct approach to verify surface heterogeneity as the microscopic origin of contact-angle hysteresis is demonstrated. IR-visible sum-frequency-generation spectroscopy (SFG) was used to selectively probe the molecules at the interface of an alkyl-side-chain polymer [poly(vinyl n-octadecyl carbamate-co-vinyl acetate)] with water. The spectra indicate that in contact with water, the polymer surface is heterogeneous (having areas of differing surface energies). This evidence of surface heterogeneity supports the hysteresis observed in the advancing and receding contact angles of the polymer surface with water. The same measurements made for the chemically and structurally similar surface of an octadecyltrichlorosilane self-assembled monolayer indicates a homogeneous surface at the water interface. In this case, contact-angle hysteresis measurements implicate surface roughness as the cause of hysteresis. Atomic force microscopy measurements of roughness for these surfaces further support our conclusions. The polymer-water interface was probed using SFG at above-ambient temperatures, and an order-to-disorder transition (ODT) of alkyl side chains at the interface was observed, which closely follows the melting of crystalline side chains in the bulk. This transition explains the increased wettability of the polymer, by water, when the temperature is raised above the bulk melting temperature. Furthermore, the irreversibility of this ODT suggests that the disordered polymer-water interface is the thermodynamic equilibrium state, whereas the before-heating structure of this interface is a kinetically hindered metastable state.     

A Molecular Strategy to Lock‐in the Conformation of a Perylene Bisimide‐Derived Supramolecular Polymer

Locking‐in the conformation of supramolecular assemblies provides a new avenue to regulate the (opto)electronic properties of robust nanoscale objects. In the present contribution, we show that the covalent tethering of a perylene bisimide (PBI)‐derived supramolecular polymer with a molecular locker enables the formation of a locked superstructure equipped with emergent structure–function relationships. Experiments that exploit variable‐temperature ground‐state electronic absorption spectroscopy unambiguously demonstrate that the excitonic coupling between nearest neighboring units in the tethered superstructure is preserved at a temperature (371 K) where the pristine, non‐covalent assembly exists exclusively in a molecularly dissolved state. A close examination of the solid‐state morphologies reveals that the locked superstructure engenders the formation of hierarchical 1D materials which are not achievable by unlocked assemblies. To complement these structural attributes, we further demonstrate that covalently tethering a supramolecular polymer built from PBI subunits enables the emergence of electronic properties not evidenced in non‐covalent assemblies. Using cyclic voltammetry experiments, the elucidation of the potentiometric properties of the locked superstructure reveals a 100‐mV stabilization of the conduction band energy when compared to that recorded for the non‐covalent assembly.     

Precipitate flotation-separation, speciation and hydride generation atomic absorption spectrometric determination of selenium(IV) in food stuffs

A method for flotation and determination of selenium(IV) in foodstuffs using p-chlorophenylthiosemicarbazide (HCPT) was investigated. At pH  2, selenium(IV) forms a 1:1 reddish-brown precipitate with HCPT easily floated using oleic acid (HOL) surfactant. The separated complex was dissolved in 4 M HCl and diluted in 10-ml double-distilled water (DDW). Selenium(IV) content in the eluate was determined by hydride generation atomic absorption spectrometry (HG-AAS) at 196.4 nm using sodium borohydride. The HCPT–Se(IV) complexes formed in absence and presence of oleic acid were characterized by elemental analysis, mass and infrared spectral studies. The mode of chelation between Se(IV) and HCPT is proposed to be through S and N coordination. Interferences, on the flotation process, from various foreign ions were avoided by adding excess HCPT. The proposed flotation methodology was successfully applied to the analysis of selenium in real foodstuffs and natural water spiked with known amounts of Se(IV) with a preconcentration factor of 100 and a detection limit of 20 pg. Application was also extended to separate Se(IV) successfully from Se(VI) in their synthetic mixtures. The separation mechanism is proposed to be due to hydrogen bond formation between the COOH group of HOL and –NH of the HCPT–Se(IV) complex.     

Dithiolate complexes of manganese and rhenium: X-ray structure and properties of an unusual mixed valence cluster Mn3(CO)6(mu-eta2-SCH2CH2CH2S)3

Treatment of Mn(2)(CO)(10) with 3,4-toluenedithiol and 1,2-ethanedithiol in the presence of Me(3)NO.2H(2)O in CH(2)Cl(2) at room temperature afforded the dinuclear complexes Mn(2)(CO)(6)(mu-eta(4)-SC(6)H(3)(CH(3))S-SC(6)H(3)(CH(3))S) (1), and Mn(2)(CO)(6)(mu-eta(4)-SCH(2)CH(2)S-SCH(2)CH(2)S) (2), respectively. Similar reactions of Re(2)(CO)(10) with 3,4-toluenedithiol, 1,2-benzenedithiol, and 1,2-ethanedithiol yielded the dirhenium complexes Re(2)(CO)(6)(mu-eta(4)-SC(6)H(3)(CH(3))S-SC(6)H(3)(CH(3))S) (3), Re(2)(CO)(6)(mu-eta(4)-SC(6)H(4)S-SC(6)H(4)S) (4), and Re(2)(CO)(6)(SCH(2)CH(2)S-SCH(2)CH(2)S) (5), respectively. In contrast, treatment of Mn(2)(CO)(10) with 1,3-propanedithiol afforded the trimanganese compound Mn(3)(CO)(6)(mu-eta(2)-SCH(2)CH(2)CH(2)S)(3) (6), whereas Re(2)(CO)(10) gave only intractable materials. The molecular structures of 1, 3, and 6 have been determined by single-crystal X-ray diffraction studies. The dimanganese and dirhenium carbonyl compounds 1-5contain a binucleating disulfide ligand, formed by interligand disulfide bond formation between two dithiolate ligands identical in structure to that of the previously reported dimanganese complex Mn(2)(CO)(6)(mu-eta(4)-SC(6)H(4)S-SC(6)H(4)S). Complex 6, on the other hand, forms a unique example of a mixed-valence trimangenese carbonyl compound containing three bridging 1,3-propanedithiolate ligands. The solution properties of 6 have been investigated by UV-vis and EPR spectroscopies as well as electrochemical techniques.     

Eilatin complexes of ruthenium and osmium. synthesis, electrochemical behavior, and near-IR luminescence

The synthesis and characterization of new Ru(II) and Os(II) complexes of the ligand eilatin (1) are described. The new complexes [Ru(bpy)(eil)(2)](2+) (2), [Ru(eil)(3)](2+) (3), and [Os(eil)(3)](2+) (4) (bpy = 2,2'-bipyridine; eil = eilatin) were synthesized and characterized by NMR, fast atom bombardment mass spectrometry, and elemental analysis. In the series of complexes [Ru(bpy)(x)(eil)(y)()](2+) (x + y = 3), the effect of sequential substitution of eil for bpy on the electrochemical and photophysical properties was examined. The absorption spectra of the complexes exhibit several bpy- and eil-associated pi-pi and metal-to-ligand charge-transfer (MLCT) transitions in the visible region (400-600 nm), whose energy and relative intensity depend on the number of ligands bound to the metal center (x and y). On going from [Ru(bpy)(2)(eil)](2+) (5) to 2 to 3, the d(pi)(Ru) --> pi(eil) MLCT transition undergoes a red shift from 583 to 591 to 599 nm, respectively. Electrochemical measurements performed in dimethyl sulfoxide reveal several ligand-based reduction processes, where each eil ligand can accept up to two electrons at potentials that are significantly anodically shifted (by ca. 1 V) with respect to the bpy ligands. The complexes exhibit near-IR emission (900-1100 nm) of typical (3)MLCT character, both at room temperature and at 77 K. Along the series 5, 2, and 3, upon substitution of eil for bpy, the emission maxima undergo a blue shift and the quantum yields and lifetimes increase. The radiative and nonradiative processes that contribute to deactivation of the excited level are discussed in detail.