Unmittelbare photometrische Bestimmung des Antimongehaltes von legierten St?hlen mit Jodid

Zusammenfassung Das photometrische Verfahren von Ploum [1,2] zur Antimonbestimmung mit Jodid in nichtlegierten Stählen wurde so modifiziert, daß einerseits die Arbeitszeit durch Vereinfachung der Methode herabgesetzt wird und es andererseits zur Untersuchung hochlegierter Stähle herangezogen werden kann. 20% Cr, 12% Ni, 3% Mo, 4% W, 2% Mn, 3% V, 1% Ti, 0,4% Si, 0,8% Nb, 0,04% Ta, 0,1% Co, 0,05% Al, 0,05% As, 0,014% Sn und 0,004% B haben keinen Einfluß. Cu > 0,2% stört. Es können Antimongehalte von 0,001–0,025% bestimmt werden.

---

Direct photometric determination of antimony in alloy steels with iodide

The method of Ploum [1,2] for the direct determination of antimony in plain steels has been modified. It has been possible to reduce the working time in simplifying the method and to apply the procedure to the investigation of high-alloy steels. 20% Cr, 12% Ni, 3% Mo, 4% W, 2% Mn, 3% V, 1% Ti, 0.4% Si, 0.8% Nb, 0.04% Ta, 0.1% Co, 0.05% Al, 0.05% As, 0.014% Sn and 0.004% B have no effect. Cu >0.2% interferes. Sb contents from 0.001 to 0.025% can be determined.

     

Combined microwave-assisted isolation and solid-phase purification procedures prior to the chromatographic determination of phenolic compounds in plant materials

A fast, sensitive and selective procedure employing a combination of microwave-assisted extraction (MAE) and solid phase extraction (SPE) was applied prior to liquid chromatographic identification and quantification of phenolic compounds in plant materials. MAE has been tested and optimized for the isolation of phenolic acids (gallic, protocatechuic, p-hydroxybenzoic, chlorogenic, vanilic, caffeic, syringic, p-coumaric, ferulic, sinapic, benzoic, m-coumaric, o-coumaric, rosmarinic, cinnamic acids) and 3,4-dihydroxybenzaldehyde, syringaldehyde, p-hydroxybenzaldehyde, and vanillin in various plants. The effects of experimental conditions on MAE efficiency, such as solvent composition, temperature, extraction time, have been studied. The extraction efficiencies were compared with those obtained by computer-controlled, two-step Soxhlet-like extractions. Plant extracts were purified and phenolic compounds were pre-concentrated using SPE on polymeric RP-105 SPE sorbent prior to HPLC analysis. Chromatographic separation was carried out on a Hypersil BDS C₁₈ column using a mobile phase consisted of 0.3% (v/v) acetic acid in water (solvent A) and methanol (solvent B) at flow rate 0.6 ml min⁻¹ and column temperature 30 °C with gradient elution.     

Neue Koordinationsverbindungen aus Triorganylzinn(IV)-dimesylamiden und Neutralliganden: Einkern- und Mehrkernkomplexe mit molekularer oder ionischer Kristallstruktur

Polysulfonylamines. CII. New Coordination Compounds Derived from Triorganyltin(IV) Dimesylamides and Uncharged Ligands: Mononuclear and Polynuclear Complexes with Molecular or Ionic Crystal Structures The purpose of this report is to draw attention to the remarkable versatility of the dimesylamides R₃SnA [A^– = (MeSO₂)₂N^–; R = Me ( 1 a ) or Ph ( 1 b )] as precursors for pentacoordinate triorganyltin(IV) complexes belonging to four distinct structural types. Representative complexes were prepared by treating 1 a or 1 b in the appropriate molar ratios with unidentate thiourea or urea-type ligands or with the bidentate ligand [Ph₂P(O)CH₂]₂ (DPPOE). The following compounds were characterized by X-ray analysis: [Me₃Sn(A)(thiourea)] ( 2 a ; monoclinic, space group P2₁/n), [Ph₃Sn(A)(tetramethylthiourea)] ( 2 b ; monoclinic, P2₁, two independent formula units), [Me₃Sn(1-methylurea)₂]⁺ · A^– ( 3 a ; monoclinic, P2₁/c), [Ph₃Sn(1,1-dimethylurea)₂]⁺ · A^– ( 3 c ; triclinic, P1), [{Ph₃Sn(A)}₂(μ-dppoe)] ( 4 ; triclinic, P1), [Ph₃Sn(μ-dppoe)]_nⁿ⁺ · n A^– · n MeCN ( 5 ; monoclinic, P2₁/c). The lattices of 2 a , 2 b and 4 contain discrete uncharged formula units which are mononuclear for 2 a and 2 b or dinuclear for 4 , whereas 3 a , 3 c and 5 have ionic structures featuring mononuclear cations for 3 a and 3 c or an infinite linear-polymeric cation for 5 . In all the structures, the tin atoms adopt trigonal-bipyramidal geometries, the apical positions being occupied in 2 a and 2 b by the S atom of the thiourea and one O atom of A^–, in 3 a and 3 c by the O atoms of two urea-type ligands, in 4 by an O atom of the bridging DPPOE molecule and one O atom of A^–, and in 5 by two phosphoryl O atoms from different bridging DPPOE ligands. In the structures of 2 a , 3 a and 3 c , the (thio)urea NH functions are connected to A^– via intermolecular or interionic N–H … O and N–H … N hydrogen bonds. Crystals of [{Me₃Sn(bipyH⁺ … A^–)}₂(μ-bipy)]²⁺ · 2 A^– ( 6 ; monoclinic, C2/c) formed adventitiously in a reaction mixture containing 1 a and 4,4′-bipyridine. The rod-like supramolecular cation of 6 (length ca. 4 nm) is built up from two Me₃Sn⁺ units bridged through bipy and unidentally coordinated by a monoprotonated bipy (= bipyH⁺), resulting in a trigonal-bipyramidal geometry around tin (N atoms apical); each of the terminal bipyH⁺ ligands forms an ⁺N–H … N^– hydrogen bond with one A^–.     

Density of Vacant Electronic States of Semiconductor Films of Molecules of Naphthalene and Diphenylphthalide Modified by Electroactive Functional Groups

Physics of the Solid State - A comparative study has been performed for the structures of the maxima of the density of unoccupied electronic states (DOUS) in ultrathin films of the...     

Unoccupied Electron States of Ultrathin Films of Thiophene–Phenylene Cooligomers on the Surface of Polycrystalline Gold

Physics of the Solid State - Unoccupied electronic states in the energy range from 5 to 20 eV above the Fermi level have been studied in ultrathin films of dimethyl-substituted...     

Mediation of metal chelation in cysteine-derived tetramate systems

A study of bicyclic tetramates modified with a bulky ester, which leads to steric hindrance of distal chelating atoms as a route for the alteration of metal binding ability is reported. This approach required the development of a direct method for the synthesis of different esters of cysteine from cystine, which then provided access to bicyclic tetramates by Dieckmann cyclisation. Further derivation to ketones and carboxamides by Grignard addition and transamination reactions respectively provided rapid access to a chemical library of tetramates with diverse substitution. Of interest is that bicyclic tetramate ketones and carboxamides showed different tautomeric and metal binding behaviour in solution. Significantly, in both systems, the incorporation of bulky C-5 esters at the bridging position not only reduced metal binding, but also enhanced antibacterial potencies against Gram-positive MRSA bacteria. Those tetramates with antibacterial activity which was not metal dependent showed physiochemical properties of MSA of 559–737 Ų, MW of 427–577 Da, clogP of 1.8–6.1, clogD_7.4 of −1.7 to 3.7, PSA of 83–109 Ų and relative PSA of 12–15% and were generally Lipinski rule compliant. A subset of tetramates exhibited good selectivity towards prokaryotic bacterial cells. Given that the work reported herein is synthesis-led, without the underpinning detailed mechanistic understanding of biological/biochemical mechanism, that the most active compounds occupy a small region of chemical space as defined by MW, clogP, PSA and %PSA is of interest. Overall, the bicyclic tetramate template is a promising structural motif for the development of novel antibacterial drugs, with good anti-MRSA potencies and appropriate drug-like physiochemical properties, coupled with a potential for multi-targeting mechanisms and low eukaryotic cytotoxicity.

A study of bicyclic tetramates modified with a bulky ester, which leads to steric hindrance of distal chelating atoms, is used as a route for the alteration of metal binding ability.     

Iron oxide thin film growth on Al2O3/NiAl(1 1 0)

The electronic structure and the growth morphology of iron oxide thin films were studied by means of Synchrotron Radiation Photoelectron Spectroscopy (SRPES) and Low Energy Electron Diffraction (LEED). A thin well-ordered alumina film on a NiAl(1 1 0) single crystal surface as a template for iron oxide growth was employed. Two different methods of iron oxide film preparation were applied. In the first attempt, iron deposited at room temperature was subsequently annealed in oxygen. Even though a whole layer of iron was oxidized, an expected long-range order was not achieved. The second attempt was to perform reactive deposition. For this reason iron was evaporated in oxygen ambient at elevated substrate temperature. This method turned out to be more efficient. Diffused but clear LEED patterns of six-fold symmetry indicating hexagonal surface atoms arrangement were observed. From the PES measurements, binding energies for Fe2p for grown iron oxide film were established as well as energy distribution curves for the valence band. Growth curves based on Fe3p core-level peak intensities for iron and iron oxide were plotted identifying type of film growth for both deposition methods. Based upon these results we have found evidence for interdiffusion in the interface between alumina and iron oxide at the early stages of growth. Further deposition led to formation of Fe₃O₄(1 1 1) (magnetite) overlayer. Moreover, the quality of the film could also be improved by long-time annealing at temperatures not exceeding 575 K. Higher annealing temperature caused disappearance of LEED pattern indicating loss of long-range ordering.     

Single-bubble sonoluminescence in air-saturated water

Single bubble sonoluminescence (SBSL) is realized in air-saturated water at ambient pressure and room temperature. The behavior is similar to SBSL in degassed water, but with a higher spatial variability of the bubble position. A detailed view on the dynamics of the bubbles shows agreement between calculated shape stability borders but differs slightly in the equilibrium radii predicted by a mass diffusion model. A comparison with results in degassed water is done as well as a time resolved characterization of bubble oscillation, translation, and light emission for synchronous and recycling SBSL. The formation of streamer structures is observed in the same parameter range, when bubble nuclei are present. This may lead to a unified interpretation of SBSL and multibubble sonoluminescence.