Multiscale Weighted Permutation Entropy Analysis of Schizophrenia Magnetoencephalograms

Schizophrenia is a neuropsychiatric disease that affects the nonlinear dynamics of brain activity. The primary objective of this study was to explore the complexity of magnetoencephalograms (MEG) in patients with schizophrenia. We combined a multiscale method and weighted permutation entropy to characterize MEG signals from 19 schizophrenia patients and 16 healthy controls. When the scale was larger than 42, the MEG signals of schizophrenia patients were significantly more complex than those of healthy controls (p<0.004). The difference in complexity between patients with schizophrenia and the controls was strongest in the frontal and occipital areas (p<0.001), and there was almost no difference in the central area. In addition, the results showed that the dynamic range of MEG complexity is wider in healthy individuals than in people with schizophrenia. Overall, the multiscale weighted permutation entropy method reliably quantified the complexity of MEG from schizophrenia patients, contributing to the development of potential magnetoencephalographic biomarkers for schizophrenia.     

降冰片烯开环易位聚合反应的分子量及分子量分布控制

使用Grubbs催化剂催化降冰片烯单体进行开环易位聚合反应, 研究了催化剂搅拌溶解时间、聚合反应的溶剂极性和三苯基膦的加入等反应条件对降冰片烯单体ROMP反应分子量及分子量分布的影响, 从而得到降冰片烯ROMP反应的最佳条件.     

聚乳酸熔体纺丝、粘接和吸附性能的初步研究

针对制备香烟过滤嘴用丝束和过滤嘴棒的特殊需要,研究了聚乳酸的纺丝、粘接和吸附性能,通过流变学测量考察了各种加工因素对熔体流动性和可纺性的影响,特别是残留水分的影响,用分子量、DSC和力学性能测量跟踪了熔体纺丝和后加工过程.所获结果对确定聚乳酸树脂的规格范围,确定纺丝和后加工工艺,具有参考价值.     

新型有机盐光引发剂的双光子聚合特性研究

本文运用激光微细加工技术,通过对不同浓度引发剂的甲基丙烯酸类树脂的聚合行为进行评价,研究了1-甲基-2-[2-(9-戊基-咔唑-3-基)-乙烯基]-3,3-二甲基吲哚碘盐(I)作为双光子光引发剂的聚合特性,结果表明该化合物在扫描速度为44μm/s时,双光子聚合阈值为139kJ/cm²;当激光能量密度为286kJ/cm²时,引发聚合的曝光时间阈值为0.7ms.实验结果为进一步作为双光子聚合三维结构的微细加工提供了可靠依据.     

四层对称结构随角异色颜料制备与光谱特性研究

采用经过酸碱预处理的具有干涉色的云母钛作为基质材料,分别包覆氧化铁、氧化铬、氧化钴制得三层结构随角异色颜料。通过改变包覆层数和各层间的排列顺序,增加基质材料与外层包覆材料的反射率差值,获得变色效果更加明显的四层结构随角异色功能颜料。用X-Rite MA86Ⅱ5角度分光光度计对颜料的反射率光谱和CIE色度值进行测试分析,研究了四层结构对颜料随角异色效果的影响,分析比较不同的包覆物与颜料随角变色效果的关系。结果表明,采用多层膜包覆,能够增加基底材料与外层包覆层的反射率,增强颜料的颜色,颜料的颜色在不同的角度会有更明显的变化,随角异色效果更加显著。     

Minimum construction of two-qubit quantum operations

Optimal construction of quantum operations is a fundamental problem in the realization of quantum computation. We here introduce a newly discovered quantum gate, B, that can implement any arbitrary two-qubit quantum operation with minimal number of both two- and single-qubit gates. We show this by giving an analytic circuit that implements a generic nonlocal two-qubit operation from just two applications of the B gate. Realization of the B gate is illustrated with an example of charge-coupled superconducting qubits for which the B gate is seen to be generated in shorter time than the CNOT gate.     

气相传输平衡法在(11-20)面蓝宝石上制备γ铝酸锂膜

为了寻找可能替代蓝宝石作为氮化镓外延的新型衬底,通过48 h的气相传输平衡,分别在1000℃、1030℃、1050℃、1070℃和1100℃制备了一层单相多晶的γ铝酸锂膜。X射线衍射和扫描电镜分别用于表征膜的物相、取向和表面形貌。结果显示,γ铝酸锂择优取向的好坏取决于气相平衡传输温度,在1050℃制备的γ铝酸锂具有高度的[100]择优取向;在γ铝酸锂(001)面上的双轴拉应力可能有助于[100]择优取向的形成;γ铝酸锂晶粒表面裂纹的方向一致性与其择优取向紧密相关。上述结果表明在合适的工艺条件下,气相传输平衡法制备的γ铝酸锂/蓝宝石可能成为一种很有前景且适合(1-100)面氮化镓生长的复合衬底。     

气相传输平衡技术制备LiGaO2薄膜

为获得与GaN薄膜晶格失配小的衬底材料,报道了利用气相传输平衡技术(VTE)在(100)-βGa2O3单晶衬底上制备高度[001]取向LiGaO2薄膜的方法。经过X射线衍射分析表明得到的薄膜是由单相LiGaO2组成。利用扫描电镜(SEM)观察表面形貌,发现经气相传输平衡技术处理得到的薄膜表面形貌主要受温度的影响,表面晶粒尺寸随温度上升而增大。而X射线衍射测试表明随着温度上升,所得到的薄膜也从多晶向单晶化转变。在经过退火处理后,通过观察吸收谱发现LiGaO2薄膜中产生色心,并且色心的种类与温度有关。表明可以通过气相传输平衡技术技术,在远低于LiGaO2熔点的温度制备外延GaN用(001)LiGaO2∥(100)β-Ga2O3复合衬底。     

基于Sagnac/双Mach-Zehnder原理的分布式光纤传感系统的偏振态分析

运用琼斯矩阵分析法,建立了该分布式传感器系统在传感光纤双折射和外部事件共同作用下,传输光的偏振态对系统功率传输系数影响的数学模型.仿真分析了在传感光纤线性双折射和圆双折射共同作用下,传输光的偏振态对系统功率传输系数的影响,并提出了利用偏振控制器对输入偏振态进行控制,从而改善干涉信号输出的方法.     

Research on relationships between Lamb wave velocity and static stress in metal plate

On the fact that an isotropic metal solid produces anisotropic property in the state of static stress, based on the theory of the nonlinear acoustoelasticity, the equivalent second order elastic constants are calculated for metal plate with static stress. For the case of thin metal plate with stress, the two kinds of dispersion equation for Lamb waves propagating parallel and vertical to the direction of static stress are derived. Using the equations, the relationships between Lamb wave velocity and static stress in a metal plate are discussed.