Uncertainty quantification in a chemical system using error estimate-based mesh adaption

This paper describes a rigorous a posteriori error analysis for the stochastic solution of non-linear uncertain chemical models. The dual-based a posteriori stochastic error analysis extends the methodology developed in the deterministic finite elements context to stochastic discretization frameworks. It requires the resolution of two additional (dual) problems to yield the local error estimate. The stochastic error estimate can then be used to adapt the stochastic discretization. Different anisotropic refinement strategies are proposed, leading to a cost-efficient tool suitable for multi-dimensional problems of moderate stochastic dimension. The adaptive strategies allow both for refinement and coarsening of the stochastic discretization, as needed to satisfy a prescribed error tolerance. The adaptive strategies were successfully tested on a model for the hydrogen oxidation in supercritical conditions having 8 random parameters. The proposed methodologies are however general enough to be also applicable for a wide class of models such as uncertain fluid flows.     

Positive value of information in games

We exhibit a general class of interactive decision situations in which all the agents benefit from more information. This class includes as a special case the classical comparison of statistical experiments à la Blackwell. AMS 2000 Subject Classification:Primary 91A35.The work of Bruno Bassan and Marco Scarsini was partially supported by MIUR-COFIN. The authors express their thanks to Sylvain Sorin for enlightening comments.     

Corrosion Products Formed on Mild Steel Samples Submerged in Various Aqueous Solutions

Corroded samples, from the steel shell of an industrial evaporator system were investigated. A protective magnetite layer had formed, which subsequently dissolved in localised areas, resulting in failure of the shell. To clarify the mechanisms involved, mild steel samples of similar composition to the steel shell were submerged in the condensate and experiments were performed at room temperature and at 90°C under both static and dynamic conditions for exposure times up to 30 days. Control samples were submerged in deionised water under similar conditions. The dynamic corrosion rates in the industrial condensate were a factor of 2 higher than the rates for the deionised water, whilst static corrosion rates, measured in both media, were lower by a factor of 3 to 4 found for the dynamic experiments. The corrosion products were identified by means of CEMS analyses. The main components were magnetite and oxyhydroxides of iron. Additional to the species mentioned, -Fe₂O₃, goethite and hematite formed.     

Tight and Scalable Side-Channel Attack Evaluations through Asymptotically Optimal Massey-like Inequalities on Guessing Entropy

The bounds presented at CHES 2017 based on Massey’s guessing entropy represent the most scalable side-channel security evaluation method to date. In this paper, we present an improvement of this method, by determining the asymptotically optimal Massey-like inequality and then further refining it for finite support distributions. The impact of these results is highlighted for side-channel attack evaluations, demonstrating the improvements over the CHES 2017 bounds.     

Time-dependent internal Quantum Efficiency and diffusion Modulation Transfer Function of N/P photodiodes

The minority carrier continuity equation has been solved with the Green’s function approach in a N/P photodiode under the low-level injection assumption. The analytical solution obtained with this approach depends on the three spatial coordinates and on time. The diffusion and the collection of the excess minority carriers have been studied during the transitional period corresponding to very short integration times. The internal Quantum Efficiency and the diffusion Modulation Transfer Function have been calculated according to time. The simulations showed that they evolve with time until their steady-state values. When the integration time is very short, this evolution has to be taken into account for the estimation of the sensitivity of a photodiode and the contrast on an image of a sensor based on several adjacent N/P-type photodiodes.     

Complement to standard method for measuring normal incidence sound transmission loss with three microphones

Complement to standard E2611-09 of the American Society for Testing and Materials [Standard Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the Transfer Matrix Method (American Society for Testing and Materials, New York, 2009)] is proposed in order to measure normal incidence sound transmission loss of materials in a modified impedance tube using a three-microphone two-load or one-load method. The modified tube is a standard two-microphone impedance tube, where a third microphone is mounted on a movable hard termination. This method is conceptually identical to the four-microphone two-load or one-load method described in the standard; however, it requires fewer transfer functions and one microphone less. The method is validated on (1) symmetrical homogeneous and (2) non-symmetrical non-homogeneous specimens.     

Suppression of parasitic lasing in high energy, high repetition rate Ti:sapphire laser amplifiers

Transverse parasitic lasing is well known for limiting the signal gain and the pulse energy that can be extracted from Ti:sapphire petawatt amplifiers. We have developed a technique for suppressing these parasitic lasing modes based on perfect refractive index-matching liquid doped with a broad-bandwidth absorber to suppress the transverse lasing while ensuring proper heat removal from the Ti:sapphire crystal. The 800 nm laser output with a bandwidth of 41 nm (FWHM) and peak energy of 22.7 J at a repetition rate of 1 Hz is demonstrated.     

DESIRS: a state‐of‐the‐art VUV beamline featuring high resolution and variable polarization for spectroscopy and dichroism at SOLEIL

DESIRS is a new undulator‐based VUV beamline on the 2.75 GeV storage ring SOLEIL (France) optimized for gas‐phase studies of molecular and electronic structures, reactivity and polarization‐dependent photodynamics on model or actual systems encountered in the universe, atmosphere and biosphere. It is equipped with two dedicated endstations: a VUV Fourier‐transform spectrometer (FTS) for ultra‐high‐resolution absorption spectroscopy (resolving power up to 10⁶) and an electron/ion imaging coincidence spectrometer. The photon characteristics necessary to fulfill its scientific mission are: high flux in the 5–40 eV range, high spectral purity, high resolution, and variable and well calibrated polarizations. The photon source is a 10 m‐long pure electromagnetic variable‐polarization undulator producing light from the very near UV up to 40 eV on the fundamental emission with tailored elliptical polarization allowing fully calibrated quasi‐perfect horizontal, vertical and circular polarizations, as measured with an in situ VUV polarimeter with absolute polarization rates close to unity, to be obtained at the sample location. The optical design includes a beam waist allowing the implementation of a gas filter to suppress the undulator high harmonics. This harmonic‐free radiation can be steered toward the FTS for absorption experiments, or go through a highly efficient pre‐focusing optical system, based on a toroidal mirror and a reflective corrector plate similar to a Schmidt plate. The synchrotron radiation then enters a 6.65 m Eagle off‐plane normal‐incidence monochromator equipped with four gratings with different groove densities, from 200 to 4300 lines mm^?1, allowing the flux‐to‐resolution trade‐off to be smoothly adjusted. The measured ultimate instrumental resolving powers are 124000 (174 µeV) around 21 eV and 250000 (54 µeV) around 13 eV, while the typical measured flux is in the 10¹⁰–10¹¹ photons s^?1 range in a 1/50000 bandwidth, and 10¹²–10¹³ photons s^?1 in a 1/1000 bandwidth, which is very satisfactory although slightly below optical simulations. All of these features make DESIRS a state‐of‐the‐art VUV beamline for spectroscopy and dichroism open to a broad scientific community.     

Droplet Sizing by Mie Scattering Interferometry in a Spark Ignition Engine

A theoretical explanation is given of a technique based on Mie scattering interferometry (MSI), obtained by defocusing of the collecting optics, to size droplets. The originality of this study is the development of a droplet sizing method by planar laser light scattering for the case of a scattering angle range close to 90°. The feasibility of this method and its limitations are fully described. The dependence on intensity levels and refractive index variations can be neglected. After discussion of some practical details about particle size, imaging and camera constraints, the results obtained in the combustion chamber of a spark ignition (SI) engine, near the spark plug, prior to ignition and for different injection timings are described and discussed. It can be concluded that the implementation of the MSI method in this experimental set-up has been realized successfully to provide droplet distributions in an SI engine. To allow the easier use of the technique, image processing software will be developed in the Matlab environment.