Determination of melengestrol acetate in bovine tissues by automated coupled-column normal-phase high-performance liquid chromatography

A method has been developed for the determination of melengestrol acetate in bovine tissues at lower levels than previously reported. Liquid-liquid extraction of tissue homogenates provided crude clean-up while final isolation, screening, and quantification was done on-line with an automated, normal-phase, coupled-column high-performance liquid chromatographic system. The chromatographic system included phenyl and silica analytical columns for the purposes of isolation and final separation, respectively. These columns provided a large difference in selectivity when operated under normal-phase conditions which allowed for the efficient isolation of melengestrol acetate from the complex tissue extracts. Mobile phases were composed of hexane and dichloromethane modified with methanol and water. Transfer and enrichment of the analyte from the primary phenyl column to the silica column was via a short (12 mm x 4 mm I.D.) silica column. Regeneration and equilibration of the phenyl column was performed after the injection of each tissue extract and was accomplished simultaneously while analytical separation occurred on the final silica column. Routing of the mobile phases and regeneration solvent was performed with automated switching valves. The total time required for each analysis was 12 min. Quantification is demonstrated using external standards with UV detection at 287 nm. The overall recovery of the method was 86% with a coefficient of variation of 9.84% at the 10 ppb [the American billion (10(9] is used in this article] level in bovine liver extracts.     

Analysis and prediction of primary structures of proteins using a computer

On the basis of a computer analysis of four classes of toxic polypeptides, generalized primary structures of each class have been obtained which can be used for planning the synthesis of biologically active compounds.     

The effect of traffic noise on sleep of young adults in their homes

The disturbance of sleep by traffic noise is a major problem area in noise pollution. Extensive laboratory tests using multichannel electroencephalograms (EEG) have been carried out by many workers to determine the general response of people when exposed to noise during sleep. An experimental technique for obtaining results in people's homes has been developed using a simplified one-channel EEG. The responses of six people in the age range 19-24 were measured. A significant correlation was found between sleep disturbance and traffic noise when the noise is expressed in EPNdB. In the home experiments the subjects appeared to be approximately 10 dB less sensitive to noises than laboratory subjects for similar noise exposure. There also appeared to be some adaptation to the noise exposure; however, only one subject was tested for a period of 20 days and was insufficient to give definite results on adaptation.     

Detection of NO traces Using resonantly enhanced multiphoton ionization: A method for monitoring atmospheric pollutants

Resonantly enhanced multiphoton ionization (REMPI) is proposed as an ultrasensitive detection method forreal-time monitoring of atmospheric pollutants in situ. The technique is demonstrated in the laboratory for NO diluted in pure nitrogen at 560 mbar. The MPI current resulting from (2+1) photon ionization of NO via the resonantC ² H (v=0) state has been measured for several NO concentrations. Detection levels as low as 50 ppt have been obtained.Laboratoire associé à l'Université de Paris-Sud     

Development of a quantitative FI-MS technique for the characterization of high- and nonboiling saturated hydrocarbon mixtures

Summary Using a saturated non-boiling hydrocarbon mixture, the influence of two parameters on the results of field ionization mass spectrometry (FI-MS) measurements was studied: (a) the potential difference between the FI emitter and the counterelectrode; (b) the emitter temperature.Variation of the potential difference had only a minor effect on the average molecular mass measured and had no evident effect on the relative ring number distribution in the sample. In contrast, when the emitter temperature was increased, higher average molecular masses were recorded. Moreover, the average molecular masses shifted to higher ring numbers. In order to control the relationship between the described influences during mixture analysis, measuring instructions have been developed that enable the quantitative analysis of unknown saturated samples. However, average molecular mass of the mixture must be known.

---

Entwicklung einer quantitativen FI-MS-Methode zur Charakterisierung von gesättigten hoch- und nichtsiedenden Kohlenwasserstoffgemischen

     

Bulk and microprobe analysis for trace elements with synchrotron radiation

Blood serum samples were irradiated by monochromatic synchrotron radiation (15 keV) and by 2.4-MeV protons to compare their performance for the detection of trace elements by x-ray fluorescence (XRF) spectrometry. Absolute concentration assignment was based on the addition of an internal standard and on a method which uses the incoherent and coherent radiation as a flux monitor of the incoming beam. Preliminary experiments with a synchrotron XRF microprobe are reported.     

New FIR laser lines and frequency measurements for optically pumped CD3OH

Twenty new cw FIR laser lines in CD₃OH, optically pumped by a CO₂ laser, are reported. The frequencies of 39 of the stronger laser lines were measured relative to stabilized CO₂ lasers with a fractional uncertainty, as determined by the reproducibility of the FIR frequency itself, of 2 parts in 10⁷.Contribution of the U.S. Government, not subject to copyright.     

Tensile behaviour of corroded and hydrogen embrittled 2024 T351 aluminum alloy specimen

The synergetic effect of corrosion and corrosion induced hydrogen embrittlement damage processes which occur at local scale has been found to result in a dramatic macroscopic tensile ductility loss of the 2024 aluminum alloy. In the present work, the tensile behaviour of corroded 2024 T351 specimens has been estimated on the basis of FE analysis by taking into account the local material properties in the damaged areas. A parametric study is involved to account for the effect of thickness in the results. Calculated tensile properties obtained with the analysis agree well with experimental data.     

The generation of three-dimensional internal waves and attendant boundary layers in a viscous continuously stratified fluid. Construction of an analytical solution

An analytical solution of a linearized problem of the emission of periodic internal waves by part of a plane which oscillates with a small amplitude in an arbitrary direction in a viscous exponentially stratified fluid is constructed. Solutions of the dispersion equation are given for all positions of the emitting surface (arbitrary, vertical, horizontal, and critical when one of the beam propagation directions is collinear with the emitting surface). The possibility of transition to the case of a uniform fluid, which is important for applications, is analyzed.     

Investigation of multicomponent fluoride optical materials in the UV spectral region: I. Single crystals of Ca1−x R xF2+x (R = Sc, Y, La, Yb, Lu) solid solutions

Crystalline materials that are transparent in the vacuum UV spectral region and currently used have been reviewed. Transmission of crystals of solid solutions with the fluorite structure Ca_1?x R _xF_2+x (R = Sc, Y, La, Yb, Lu) in the UV and vacuum UV spectral regions has been investigated. It is shown that application of different methods of purification of fluorides from some impurities can significantly improve the optical quality of fluoride multicomponent crystals in the short-wavelength spectral region.