Importance of dynamic surface tension to the residual water content of fabrics

At the end of the final spin cycle of the laundry process, the residual moisture content (RMC) of fabric is directly related to the dynamic surface tension of the residual water in the fabric. The LaPlace equation for capillary rise predicts that the capillary rise of solutions in a capillary is proportional to the surface tension at the air-liquid interface. If fabric can be considered to be a large ensemble of capillaries due to interfiber spacing, then the RMC of fabrics will be directly related to the surface tension of residual solution in the fabric. The use of a tailored rinse additive has the potential to decrease the surface tension of solution significantly, thus leading to a decrease in the residual water content of the fabric. It is expected that as the surfactant concentration increases the surface tension decreases. Hence, the RMC of fabrics must decrease with increasing surfactant concentration. However, a peak is observed in the RMC of fabrics before the critical micelle concentration (CMC) is reached. Prior to the CMC, it is proposed that a sudden adsorption of surfactant is occurring on the fabric surface leading to a decrease in bulk monomer concentration. The decrease in free monomer concentration should result in an increase in the equilibrium surface tension of the residual solution leading to a concomitant increase in RMC. Because the dynamic surface tension is measured on a short time scale (on the order of milliseconds), there will be less adsorption of monomer onto the newly created air-liquid interface of the bubbles during the measurement process. This decrease in adsorption should lead to a pronounced increase in the dynamic surface tension. This indeed was observed. The RMC correlates very well with the dynamic surface tension of the residual solution.     

An efficient reagent for the phosphorylation of deoxyribonucleosides, DNA oligonucleotides, and their thermolytic analogues

[reaction: see text] The phosphoramidite 11 was prepared in three steps from methyl 2-mercaptoacetate and demonstrated efficiency in the synthesis of conventional 5'-/3'-phosphate/thiophosphate monoester derivatives of 2'-deoxyribonucleosides and DNA oligonucleotides. Moreover, the use of 11 has enabled the preparation of the dinucleoside phosphorothioate analogue 26 in high yields (>95%) with minimal cleavage (<2%) of the thermolytic thiophosphate protecting group.     

Self-consistent-field – Hartree–Fock method with finite nuclear mass corrections

We have upgraded a Self-consistent-field – Hartree–Fock routine to include a finite nuclear mass correction for molecules developed in our laboratory. The new routine can handle isotopomers without calculating any nuclear kinetic energy matrix element. Tests on H₂, LiH, HF, F₂, and H₂O isotopomers indicate the equivalence of our correction to the standard diagonal adiabatic correction. A further original application to C₂H₆ illustrates the usefulness of the method for polyatomic molecules. The resulting molecular orbitals carry the nuclear mass signature, exemplified with Koopmans ionization potentials.From the Proceedings of the 28th Congreso de Químicos Teóricos de Expresión Latina (QUITEL 2002)     

Boron trifluoride-methanol complex—mild and powerful reagent for deprotection of labile acetylated amines

A set of amino-group possessing cyanine dyes is obtained from their N-acetyl derivatives via deprotection with boron trifluoride-methanol complex in good yields.     

Fast exopolysaccharide secretion of Pseudomonas aeruginosa on polar polymer surfaces

The influence of the surface chemical structure and related physicochemical properties on the adhesion of P. aeruginosa has been studied for moderately hydrophobic polymers and for hydrophilic surfaces obtained by O2-plasma treatments and 50 keV Ar+ beam irradiation of poly(hydroxymethylsiloxane) and poly(ethyleneterephthalate). The surface chemical structure has been obtained by X-ray photoelectron spectroscopy, the roughness was measured by atomic force microscopy, and the surface free energy was evaluated from contact angle measurements for all the polymer substrates before and after the irradiation treatments. It is shown that a massive and unusually fast secretion of exopolysaccharides onto highly polar surfaces, corresponding to the formation of complex three-dimensional multilayers (i.e., biofilm-like structures), occurs already after 2 h of incubation. It is suggested that such highly polar surfaces can operate either by promoting, by means of a still unknown biomolecular mechanism, an early gene expression process or by mimicking the P. aeruginosa cellular walls.     

Regiocontrolled synthesis of enantiopure 3,3'-thiosubstituted biphenyls

Sulfenylation of 6,6'-dimethoxy-2,2'-dihydroxybiphenyl, used as a racemic mixture and single enantiomers, by phthalimidesulfenyl chloride afforded the corresponding 3,3'-N,N'-dithiophthalimide with complete regioselectivity. Simple manipulations of the latter compound allowed access to the corresponding bis-thiol or o-thioquinone as useful intermediates for the synthesis of new sulfur-containing open-chain and macrocyclic C(2) enantiopure ligands. The application of this methodology to the preparation of a biphenyl bearing two cysteine units as potential HIV-1 protease inhibitor is also described.     

In situ spectroscopic characterization of rectifying molecular monolayers self-assembled on gold.

We report visible, Raman, and infrared spectra of self-assembled monolayers (SAMs) formed by the donor-(pi-bridge)-acceptor chromophore, Z-beta-[N-(omega-acetylthioalkyl)-4-quinolinium]-alpha-cyano-4-styryldicyanomethanide (CH3CO-S-CnH2n-Q3CNQ where n=8, 10), on gold-coated substrates. The data are compared with the spectra collected for the same compound in solution and in the solid state, and with those obtained for a Langmuir-Blodgett (LB) monolayer of C16H33-Q3CNQ deposited on gold. Spectral analysis confirms that in solution, in the solid state and in the LB film the chromophore has a zwitterionic (D+-pi-A-) ground state. At variance with this well-known result, our data show that in SAMs deposited on gold the chromophore has a more neutral, quinoid ground state. We relate this difference to the different packing of the molecules in the two different films: in SAMs in fact the chromophores stand almost vertical with respect to the substrate, whereas in LB films they make an angle of about 45 degrees. The Q3CNQ molecule is a well-known molecular rectifier, and for SAMs we were able to check the direction of electron flow at forward bias on the same samples that have been characterized spectroscopically, shedding light on the rectification mechanism.     

Single-site heterogeneous Cr-based catalyst for the selective trimerisation of ethylene

TAC-Cr3+/SiO2 complexes are highly active and selective ethylene trimerisation catalysts and possess single-site catalytic behaviour, an unusual property for heterogeneous catalysts.     

Optimisation of stir bar sorptive extraction for the analysis of volatile phenols in wines

An easy, fast and reliable analytical method is proposed for the determination of the concentration of volatile phenols (ethyl- and vinylphenols) in wines. The novel stir bar sorptive extraction (SBSE) technique is employed, following a simple and fast procedure that allows 15 samples to be extracted simultaneously using very small sample volume. Extracts are desorbed in a thermodesorption system (TDS) coupled on-line to a gas chromatograph-mass spectrometry system. The SBSE offers better recovery and linear regression coefficient (r2) for the four volatile phenols than solid-phase extraction (SPE). The mass spectrometric detection in selected ion monitoring mode contributes to the lower detection limit and good sensibility obtained with this method.     

Preparation and characterization of individual peptide-wrapped single-walled carbon nanotubes

Two challenges for effectively exploiting the remarkable properties of single-walled carbon nanotubes (SWNTs) are the isolation of intact individual nanotubes from the raw material and the assembly of these isolated SWNTs into useful structures. In this study, we present atomic force microscopy (AFM) evidence that we can isolate individual peptide-wrapped SWNTs, possibly connected end-to-end into long fibrillar structures, using an amphiphilic alpha-helical peptide, termed nano-1. Transmission electron microscopy (TEM) and well-resolved absorption spectral features further corroborate nano-1's ability to debundle SWNTs in aqueous solution. Peptide-assisted assembly of SWNT structures, specifically in the form of Y-, X-, and intraloop junctions, was observed in the AFM and TEM images.