Boron trifluoride-methanol complex—mild and powerful reagent for deprotection of labile acetylated amines

A set of amino-group possessing cyanine dyes is obtained from their N-acetyl derivatives via deprotection with boron trifluoride-methanol complex in good yields.     

Regiocontrolled synthesis of enantiopure 3,3'-thiosubstituted biphenyls

Sulfenylation of 6,6'-dimethoxy-2,2'-dihydroxybiphenyl, used as a racemic mixture and single enantiomers, by phthalimidesulfenyl chloride afforded the corresponding 3,3'-N,N'-dithiophthalimide with complete regioselectivity. Simple manipulations of the latter compound allowed access to the corresponding bis-thiol or o-thioquinone as useful intermediates for the synthesis of new sulfur-containing open-chain and macrocyclic C(2) enantiopure ligands. The application of this methodology to the preparation of a biphenyl bearing two cysteine units as potential HIV-1 protease inhibitor is also described.     

Single-site heterogeneous Cr-based catalyst for the selective trimerisation of ethylene

TAC-Cr3+/SiO2 complexes are highly active and selective ethylene trimerisation catalysts and possess single-site catalytic behaviour, an unusual property for heterogeneous catalysts.     

Optimisation of stir bar sorptive extraction for the analysis of volatile phenols in wines

An easy, fast and reliable analytical method is proposed for the determination of the concentration of volatile phenols (ethyl- and vinylphenols) in wines. The novel stir bar sorptive extraction (SBSE) technique is employed, following a simple and fast procedure that allows 15 samples to be extracted simultaneously using very small sample volume. Extracts are desorbed in a thermodesorption system (TDS) coupled on-line to a gas chromatograph-mass spectrometry system. The SBSE offers better recovery and linear regression coefficient (r2) for the four volatile phenols than solid-phase extraction (SPE). The mass spectrometric detection in selected ion monitoring mode contributes to the lower detection limit and good sensibility obtained with this method.     

The state of conservation of painted surfaces in the presence of accelerated ageing processes monitored by use of FT-Raman spectroscopy and multivariate control charts

A new method has been developed for monitoring the degradation of paintings. Two inorganic pigments (ultramarine blue and red ochre) were blended with linseed oil and spread on canvas. Each canvas was subjected to simulated accelerated ageing in the presence of typical degradation agents (UV radiation and acidic solution). Periodically the painted surfaces were analysed by FT-Raman, to investigate the status of the surface. The data obtained were analysed by principal component analysis (PCA). Finally the Shewhart and cumulative sum control charts based on the relevant principal components (PC) and the so called scores monitoring and residuals tracking (SMART) charts were built. The method based on the use of PC to describe the process was found to enable identification of the presence of relevant modification occurring on the surface of the samples studied.Electronic supplementary material Supplementary material is available for this article at     

Poly(butylene terephthalate)/poly(ε-caprolactone) blends: Influence of PCL molecular mass on PBT melting and crystallization behavior

The isothermal crystallization kinetics and melting behavior of poly(butylene terephthalate) (PBT) in binary blends with poly(ε-caprolactone) (PCL) was investigated as a function of PCL molecular mass by differential scanning calorimetry and optical microscopy. The components are miscible in the melt when oligomeric PCL (M_w = 1250) is blended with PBT, whereas only partial miscibility was found in mixtures with higher molecular mass (M_w = 10,000 and 50,000). The equilibrium melting point of PBT in the homopolymer and in blends with PCL was determined through a non-linear extrapolation of the T_m = f(T_c) curve. The PBT spherulitic growth rate and bulk crystallization rate were found to increase with respect to plain PBT in blends with PCL1250 and PCL10000, whereas addition of PCL50000 causes a reduction of PBT solidification rate. The crystallization induction times were determined by differential scanning calorimetry for all the mixtures through a blank subtraction procedure that allows precise estimation of the crystallization kinetics of fast crystallizing polymers. The results have been discussed on the basis of the Hoffman-Lauritzen crystallization theory and considerations on both the transport of chains towards the crystalline growth front and the energy barrier for the formation of critical nuclei in miscible and partially miscible PBT/PCL mixtures are widely debated.     

Synthesis and spectral properties of 2‐methylthio‐3H‐7‐[(o‐; m‐ and p‐substituted)phenoxy]‐4‐(p‐substituted‐phenyl)‐[1,5]benzodiazepines

A series of eleven new 2‐methylthio‐3H‐7‐[(o‐; m‐ and p‐substituted) phenoxy]‐4‐(p‐substituted‐phenyl)‐[1,5]benzodiazepines, which have potentially useful pharmacological activities, has been synthesized by condensing the 4‐[(o‐; m‐ and p‐R₁)phenoxy]‐1,2‐phenylendiamines with 3,3‐dimercapto‐1‐(p‐R₂‐phenyl)‐2‐propen‐1‐one. Afterward the lH‐[1,5]benzodiazepine‐2‐thiones obtained were treated with sodium hydride and methyl iodide. The structure of all products was corroborated by ir, ¹H nmr, ¹³C nmr and ms.     

Chromatographic and column stability at pH 7 of a C18 dimethylurea polar stationary phase

Chromatographic evaluations of a C18 dimethylurea phase in 150 mm x 3.9 mm HPLC columns were performed using the Tanaka and Engelhardt test mixtures. The applicability of the new C18 dimethylurea phase was also evaluated with a mixture of some herbicides and their metabolites. An artificial aging procedure was also performed by passing a potassium phosphate mobile phase buffered at pH 7.0 through C18 50 mm x 3.9 mm dimethylurea columns. The column stability was evaluated by means of the chromatographic parameters obtained for the separation of some compounds from the Neue test mixture, using apolar, polar and highly basic analytes.     

Titanium as a chemical modifier for the determination of cobalt in marine sediments

The determination of cobalt in marine sediments by electrothermal atomic absorption spectrometry was studied using no modifier and magnesium and titanium as modifiers. Titanium is one of the major sediment constituents, which widely affects the cobalt determination and it was studied as a chemical modifier since it was the only concomitant that increased the cobalt signal in the concentration range usually found in sediments. The performance of Mg and Ti as chemical modifiers was compared relative to maximum pyrolysis and atomization temperatures, linear calibration range, sensitivity and matrix effects. The pyrolysis curves showed that the analyte could be stabilized up to 1400 °C when either Ti or Mg(NO₃)₂ was present, while only 1000 °C could be used in the absence of a modifier. The optimum atomization temperature was 2500 °C in all cases. Analytical curves were compared using no modifier, 5 μg Ti and 100 μg Mg(NO₃)₂ as modifiers, and the linear range found was up to approximately 4 ng Co whether a modifier was used or not. With Ti as a chemical modifier, analytical curves for cobalt in aqueous solution and in a synthetic matrix resulted in the same sensitivity (m₀=55 pg), whereas the use of Mg led to characteristic mass values of 59 and 72 pg in aqueous solution and in a synthetic matrix, respectively, showing some matrix effect. The detection limits (3σ, n=10) were 0.4 μg g⁻¹ using no modifier and 0.3 μg g⁻¹ with Ti as a modifier in the original matrix. A reference estuarine sediment NIST 1646 with a non-certified content of 10.5 μg g⁻¹ Co was analyzed and the found value of 10.9±2.4 μg g⁻¹, (n=3), using Ti as chemical modifier and calibration against aqueous standards, was in good agreement with the recommended value.     

Mechanism of action of 4-hydroxymethyl-1,6,8-trimethylfuro[2,3-h]quinolin-2(1H)-one, a very active angular furocoumarin-like sensitizer

The molecular structure of 1,4,6,8-tetramethylfuro[2,3-h]quinolin-2(1H)-one (FQ), a recent furocoumarin-like photosensitizer, has been modified with the aim of reducing its strong genotoxicity, by replacing the methyl group at 4 position with a hydroxymethyl one, and so obtaining 4-hydroxymethyl-1,6,8-trimethylfuro[2,3-h]quinolin-2(1H)-one (HOFQ). This modification gave rise to a strong reduction of lipophilicity and dark interaction with DNA. The formation of monoadducts (MA) was deeply affected, whereas the induction of bifunctional adducts between DNA and proteins (DPC(L>0)) was replaced by an efficient production of DNA-protein cross-links at zero length (DPC(L=0)), probably via guanine damage. Because of its angular molecular structure, HOFQ does not form interstrand cross-links (ISC): therefore, DPC(L=0) and MA represent the main lesions induced by HOFQ in DNA. In comparison with FQ (which induces MA and DPC(L>0)) and 8-methoxypsoralen (8-MOP) (MA, ISC, DPC(L>0)), HOFQ seems to be a more selective agent. In fact, contrary to FQ and 8-MOP, HOFQ, together with a noticeable antiproliferative activity, shows low levels of point mutations in bacteria and of clastogenic effects in mammalian cells. HOFQ is also an efficient apoptosis inducer, especially in comparison with 8-MOP, when tested at equitoxic experimental conditions; this property might be correlated with the complete HOFQ inability of inducing skin erythemas, a well-known side effect of classic furocoumarin photosensitization.