Application of amperometric sol-gel biosensor to flow injection determination of glucose

A glucose biosensor with enzyme immobilised by sol–gel technology was constructed and evaluated. The glucose biosensor reported is based on encapsulated GOX within a sol–gel glass, prepared with 3-aminopropyltriethoxy silane, 2-(3,4-epoxycyclohexyl)-ethyltrimetoxy silane and HCl. A flow system incorporating the amperometric biosensor constructed was developed for the determination of glucose in the 1×10⁻⁴–5×10⁻³ mol l⁻¹ range with a precision of 1.5%. The results obtained for the analysis of electrolytic solution for iv administration and human serum samples showed good agreement between the proposed method and the reference procedure, with relative error <5%.     

O2 interaction and reactivity on a model hydroxylated rutile(110) surface

Recently several theoretical studies have examined oxygen adsorption on the clean, reduced TiO2(110) surface. However the photocatalytic behavior of TiO2 and the scavenging ability of oxygen are known to be influenced by the presence of surface hydroxyls. In this paper the chemistry of O2 on the hydroxylated TiO2 surface is investigated by means of first-principles total energy calculations and molecular dynamics (MD) simulations. The MD trajectories show a direct, spontaneous reaction between O2 and the surface hydroxyls, thus supporting the experimental hypothesis that the reaction does not necessarily pass through a chemisorbed O2 state. Following this reaction, the most stable chemisorbed intermediates are found to be peroxide species HO2 and H2O2. Although these intermediates are very stable on the short time scale of MD simulations, the energetics suggests that their further transformation is connected to a new 300 K feature observed in the experimental water temperature programmed desorption (TPD) spectrum. The participation of two less stable intermediate states, involving terminal hydroxyls and/or chemisorbed water plus oxygen adatoms, to the desorption process, is not supported by the total energy calculations. Analysis of the projected density of states, however, suggests the possibility that these intermediates have a role in completing the surface oxidation immediately before desorption.     

Metal Oxoclusters as Molecular Building Blocks for the Development of Nanostructured Inorganic–Organic Hybrid Thin Films

Silica-based inorganic–organic hybrid thin films embedding the organically modified oxohafnium clusters (Hf₄O₂(OMc)₁₂, OMc=OC(O)–C(CH₃)=CH₂) were obtained by photo-activated free radical copolymerisation of the methacrylate groups of the cluster with those of the pre-hydrolysed (methacryloxypropyl)trimethoxysilane (MAPTMS, (CH₂=C(CH₃)C(O)O)(CH₂)₃Si(OCH₃)₃). By this route, a covalent anchoring of the cluster to the forming silica network was achieved. Samples characterized by two different Si/Hf compositions (18:1, 5:1) were prepared. The surface and in-depth composition of the thin films were investigated through Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). XPS depth profiles performed on the thin layers evidenced a homogenous in depth distribution of the hafnium guest species within the whole silica films and sharp film-substrate interfaces. Broad band dielectric spectroscopy (BDS) measurements permitted to investigate the electric response of the obtained films in the frequency and temperature range of 40 Hz – 1 MHz and 0–160°C.     

COCl2…NH3和COCl2…H2S体系的理论研究

在MP2水平上,用aug-cc-pVTZ基组对COC l2…NH3和COC l2…H2S体系进行几何优化和频率计算,同时使用Counterpoise技术进行BSSE校正,分别得到4个COC l2…NH3和2个COC l2…H2S无虚频的稳定结构:N(S)…C连接的构型(Ⅰ,Ⅱ,Ⅴ)和N(S)…C—lC直线型连接的构型(Ⅲ,Ⅳ,Ⅵ).第一类构型比第二类构型相互作用能更大、更稳定.在得到的6个稳定络合物中,络合物Ⅰ是最稳定的.     

壳聚糖-盐酸溶液中温度敏感的相分离行为

研究了壳聚糖 盐酸溶液温度敏感的相分离行为.通过对壳聚糖-盐酸溶液浊度变化的考察以确定相分离温度.测定不同盐酸浓度、壳聚糖浓度以及不同脱乙酰度的条件下的相分离温度，并用DLVO理论(Deijaguin-Landau and Verwey-Overbeck Theory)进行了解释. FTIR、X-ray以及SEM分别描绘了壳聚糖经相分离过程后官能团、结晶状态、颗粒形态的特点.     

配位聚合物{[Co(μ-4,4′-bpy)(4,4′-bpy)2·(H2O)2]·(4,4′-bipy)·(H2O)4·(OH)3·(Me)4N}n的晶体结构及性质

配位聚合物通常是通过某种有机配体与金属的配位几何选择以及无限网络的拓扑结构控制而形成的具有无限结构的化合物 [1] ,其结构新颖并具有不寻常的光电效应、非线性光学性能、磁性、超导及催化等诸多具有诱人应用前景的独特性能 .因此 ,近年来倍受化学家和材料学家的重视 [2～ 5] .以 Co为配位中心的配位聚合物若具有八面体构型 ,在一定条件下具有自旋转换能力 ,而且往往可与光电转换能力相关联 ,是一种潜在的新型信息存储材料 [6 ] .对于配位聚合物的形成 ,配体的选择最重要 . 4,4′-联吡啶及其衍生物是一种较好的刚性配体 ,相关的配位聚…     

Theoretical study of the local structure and Raman spectra of CaO-SiO2 binary melts

A procedure for the Raman spectra calculation of vitreous and molten silicates was presented in this paper. It includes molecular dynamics MD simulation for the generation of equilibrium configurations, Wilson's GF matrix method for the calculations of eigenfrequencies and corresponding vectors, electro-optical parameters method (EOPM) for the Raman intensity calculations, and the bond polarizability model (BPM) for the determination of polarizability and polarizability derivative. One of the most important characteristics of this procedure is the achievement of the partial Raman spectra of five tetrahedral units, as well as the total spectral envelope. In this paper, the calculation was carried out for the vitreous and molten calcium silicates with different compositions and at various temperatures. It is worthwhile to note that the calculation is based on statistical configurations distribution in the space and so it is not needed to artificially adjust the full width at half maximum (FWHM) of spectra. It was also tested through the good agreement of the calculated spectra with the experimental, including some regularity of spectral properties. According to the calculation, the symmetrical stretching of whole tetrahedral units, to which the stretching of Si-O(nb) bond gives the main contribution to intensity, is proven to be the dominance in the high-frequency range (800-1200 cm(-1)) and the symmetrical bending of Si-O(b)-Si, to which the stretching of Si-O(b) bond exhibits the main contribution, is the dominance in the medium-frequency range (400-700 cm(-1)). As the first theoretical results, the Raman scattering coefficient of each Q(i) was found little change along with the variation of composition and temperature.     

三核钨钼簇合物对苯乙烯氧化反应的催化

关于烯烃的催化氧化,报道较多。Takao等研究了苯乙烯在Ir和Rh络合物存在下的氧化反应;Collman曾报道环己烯在Vaska络合物[IrX(CO)(PPh_3)_2]催化下氧化成环己酮和环已烯氧化物。本文采用Cotton合成的簇合物[W_3O_2(CH_3CO_2)_6(H_2O)_3]Br_2·     

Steric and kinetic effects of changing solvent and reactant in grignard reactions: Conformationally mobile versus rigid δ-keto esters

trans-7α-carbomethoxy-decal-1-one (2) yields a mixture of the two oxy-esters 6 and 7 on reacting with MeMgX. Ratios $\text{6}\text{7}$ were measured for reactions performed in benzene (with X = I) and in THF (with X = Cl). The small variations of the ratios $\text{6}\text{7}$ as compared to those obtained in analogous experiments performed with methyl (2-oxo-cyclohexyl)-propionate 4 and methyl 4-methyl-5-oxo-hexanoate 5 suggest that conformational mobility plays a fundamental role in determining the variations of stereospecificity with varying the reaction conditions. Competitive Grignard reactions among 2,4 and 5 show that their reactivities are in the order 4>2>5 ($\text{K}{}_4\text{k}{}_2$ = 1.7; $\text{k}{}_5\text{k}{}_2$=0.8) when reactions are performed in benzene with X  I and 2>4>5 ($\text{k}{}_4\text{k}{}_2$= 0.56; $\text{k}{}_5\text{k}{}_2$=0.25) when reactions are performed in THF with X  C1. The experimental data are interpreted in terms of anchimeric assistance given by the ester group to the reactions of the keto group in conformationally mobile δ-keto esters. The occurrence of this effect depends on the reaction conditions which can favour, or not, folded transition states.     

Positive and negative ion chemistry of the anesthetic halothane (1-bromo-1-chloro-2,2,2-trifluoroethane) in air plasma at atmospheric pressure

The ion chemistry of 1-bromo-1-chloro-2,2,2-trifluoroethane (the common anesthetic halothane) in air plasma at atmospheric pressure was investigated by atmospheric pressure chemical ionization mass spectrometry (APCI-MS). The major positive ion observed at low declustering (API interface) energies is the ionized dimer, M(+.)M, an unexpectedly abundant species which possibly is stabilized by two H-bonding interactions. At higher energies [M--HF](+.) and [M--Br](+) prevail; the former, corresponding to ionized olefin [ClBrC=CF(2)](+.), appears to originate from M(+.)M and is quite stable towards fragmentation. The latter fragment ion ([M--Br](+)) and its analogue, [M--Cl](+), which is also observed though at much lower abundance, are originally ethyl cations (+)CHX--CF(3) (X = Br, Cl) which, upon collisional activation, rearrange and fragment to CHFX(+) via elimination of CF(2). All of the above described ions are also observed in humid air: in addition, the oxygenated ion [ClBrC=CFOH](+.) also forms in humid air via water addition to [ClBrC=CF(2)](+.) and HF elimination, as observed earlier for ionized trichloroethene. In contrast with similar chloro- and fluoro-substituted ethanes, halothane does not react with H(3)O(+) in the APCI plasma, a result confirmed by selected ion APCI triple-quadrupole (TQ) experiments. Major negative ions formed from halothane in the air plasma are Br(-) and, to a lesser extent, Cl(-), and their complexes with neutral halothane. APCI-TQ experiments indicated that Br(-) and Cl(-) are formed via reaction of halothane with O(2) (-.), O(2) (-.)(H(2)O) and O(3) (-.), possibly via dissociative electron transfer or nucleophilic substitution. Competing proton transfer was also observed in the reaction with O(2) (-.) and, at high halothane pressure, also with O(2) (-.)(H(2)O); at lower pressures the molecular anion M(-.) was observed instead. The other minor anions of the air plasma, NO(2) (-), N(2)O(2) (-.) and NO(3) (-), were found to be unreactive towards halothane.