Spectrophotometric study of bismuth with N-(2-acetamido)iminodiacetic acid (ADA): Determination of bismuth in pharmaceutical formulations

A new method for the Spectrophotometric determination of bismuth using N-(2-acetamido)iminodiacetic acid as complexometric agent is proposed. The complex is formed in a wide pH range, 5.5–7.5, and has a maximum absorption at 265 nm. Beer's law is obeyed in the interval 3.8–17.9 μg of bismuth(III)/ml, with a minimum photometric error of 2.3. The molar absorptivity is 9.1 × 10³ liters/cm mol. The stoichiometry of the reaction takes place in the metal-to-ligand ratio 1:2. The interferences produced by the more common ions are studied. The method has been successfully applied to the determination of bismuth in pharmaceutical formulations.     

Studium der Reduktion von Resazurin

Zusammenfassung In dieser Arbeit wurden Schlußfolgerungen über den simultanen Verlauf der beiden Reduktionsphasen von Resazurin überprüft.Weiters wurden Bedingungen für die quantitative titanometrische Bestimmung von Resazurin und seiner Derivate ermittelt.

---

The conclusions about the simultaneous course of reduction of Resazurin to Resorufin and Resorufin to Dihidroresorufin were verified in this work.The conditions for the quantitative titanometric determination of Resazurin and its derivatives were found.

---

---

Mit 4 Abbildungen     

Multivariate calibration methods for quantification in strongly overlapping capillary electrophoretic peaks

Capillary zone electrophoresis with diode-array detection was applied to the separation of ebrotidine and its metabolites. However, three of these, which are neutral in the conditions studied, co-migrated with the electroosmotic flow signal. Therefore, strongly overlapping peaks were observed. The main aim of this study was to show the potentiality of capillary electrophoresis in combination with chemometrics. Multivariate calibration methods were applied to quantify these analytes in synthetic mixtures. The results obtained using partial least squares (PLS) were in agreement with actual values, with an overall prediction error of 9.7%.     

Detection of conformational and net charge differences in DNA-protein complexes by quantitative electrophoresis on polyacrylamide-agarose copolymer gels

The Galactosidase repressor (GalR) of Escherichia coli modulates the expression of the gal operon by binding to two DNA operators, OE and O1. The OE and O1 elements are 16 bp pallindromic DNA sequences, differing in four of the base pairs. OE and O1 DNA fragments, both free and complexed with repressor, were analyzed by "quantitative gel electrophoresis". By the criteria of that method, applied to the linear Ferguson plots of both DNA fragments and the linear ranges of those of the DNA-GalR complexes, it was shown that the apparent size of DNA increases upon repressor binding. Moreover, this size increase is greater for the complex with the O1 operator than for the complex with the OE operator in the case that GalR is located in the center of a 155 bp DNA fragment. This is not the case when GalR is located in a peripheral position. By contrast with their size differences, the centrally located GalR-O1 and GalR-OE complexes appear to possess indistinguishable net surface charge densities as judged from the intercepts with the mobility axis. The larger size of the complex with centrally located O1 fragment, as compared with that bearing the OE fragment, is interpreted as being due to bending of the DNA-protein complex, since an authentically bent fragment of a plasmid with bent upstream activator sequence also exhibits a larger slope of the Ferguson plot, and thus the larger size, than predicted on the basis of its DNA chain length (bp).(ABSTRACT TRUNCATED AT 250 WORDS)     

Temperature induced structural changes of Cu(II) and Ni(II) complexes and their thermal decomposition

The paper discusses the structural changes of some Cu(II) and Ni(II) complexes during the heating and their influence upon the decomposition stoichiometry. The influence of the interactions inside of coordination polyhedra, bonding and stereochemical properties of the counter ions or molecules are discussed in this connection as well. The expressive influence of the plasticity or rigidity of the Cu(II) and Ni(II) coordination polyhedra, respectively, is emphasized.

---

Zusammenfassung Es werden wÄrmebedingte StrukturverÄnderungen einiger Cu(II) bzw. Ni(II)-Komplexe sowie deren Einflu\ auf die Stöchiometrie der Zersetzung beschrieben. In diesem Zusammenhang wird auch ebenso der Einflu\ von Wechselwirkungen innerhalb des Koordinationspolyeders sowie von Bindungs- und stereochemischen Eigenschaften der Gegenionen oder -moleküle beleuchtet. Es wird der ausdrucksvolle Einflu\ der PlastizitÄt und HÄrte von Cu(II)- und Ni(II)-Koordinationspolyedern hervorgehoben.

     

Investigation on the chemistry of berbans—VII: Synthesis of 10,11-dimethoxy(depyrrolo)raunescine stereoisomers

Acyloxy-ketone rearrangement, proceeding by the action of base, has been observed in the case of ketone 2. By the reduction of ketones 2 and 3 with sodium boron hydride, new 10, 11-dimethoxy(depyrrolo)raunescine stereoisomers (5a–7a) have been prepared. Previously known alcohols with alloberban skeleton (12,13) have been similarly converted into tetracyclic raunescine stereoisomers (8a,9) by the oxido-reductive method. The stereochemistry of these compounds has been investigated by physical (¹H NMR, IR) and by chemical methods.     

Potentiometric studies of dithiooxamide with a sulphide-selective membrane electrode

The sulphide-selective electrode is applicable to the determination of dithiooxamide by titration with silver nitrate. The effect of the alkali content of the solutions on the reaction has been studied. The reaction products are silver sulphide, oxalic acid, and nitric acid. If the alkali concentration of the solution is lower than that equivalent to the acid formed during the titration, the amount of sulphide produced by hydrolysis decreases and the equilibrium potential is established more slowly.The determination is rapid and accurate in the presence of 1 M sodium hydroxide.     

Radionuclide X-ray fluorescence analysis of drinking water using preconcentration of trace metals on chelating cellulose exchanger OSTSORB-OXIN

Determination of Cr, Fe, Cu, Zn and Pb in drinking water preconcentrated on a chelating ion exchanger of Czechoslovak production is described. The analytical system consisted of a radionuclide source²³⁸Pu, a Si/Li semiconductor detector and a multichannel analyzer. Results are compared with trehshold limit values recommended for drinking water.     

Thermal behaviourof complexes of antipyrine derivatives Part III.

The thermal behaviour of the mixed-ligand complexes of cobalt(II) and copper(I) ions with antipyrine derivatives of 1,2-ethanediamine or piperazine (BAMP and TAMEN), with water and with 2-mercapto-benzothiazole (Hmbt) was investigated. The complexes contain 2-mercaptobenzothiazole (Hmbt, in the case of cobalt(II) ion) or dimercaptobenzothiazine (mbt–mbt, in the case of copper(I) ion) molecules as ligands and perchlorate (ClO₄^–) or thiocyanate (SCN – ) ion as counterion. By heating, water and ligands release the solid phase at lower temperature. At higher temperatures process of different organic reactions of ligands (e.g. polymerization, polycondensation) could be suggested to interpret the relative high final mass values.     

Elaboration of a programmed,semi-automated radiochemical processing system for neutron activation analysis of some volatile elements

Based on the method of SAMSAHL a programmed, semi-automated processing system has been developed and tested for the neutron activation analysis of the following elements: As, Se, Sb, Br, Sn and Te. The main characteristics of the procedure are the following: wet ashing of the sample (by means of digestion in a mixture of concentrated sulphuric acid and hydrogen peroxide), bromination, and chlorination. The procedure is controlled via the appropriate dosage of the reagents and a carefully managed thermal balance. The chemical yield and its reproducibility were determined by tracer techniques using exactly the same parameters as for the active runs. According to the results the method can be used for the routine determination of the given elements except antimony. Presented at the 4th Symposium on the Recent Developments in Neutron Activation Analysis, 1975, Cambridge.