含呋喃环Schiff碱型大环化合物的合成及其与Ba^2+,Sr^2+配合行为

利用Mn^2+，Ba^2+及Sr^2+作为模板离子，合成了一类新型的含呋喃环系 Schiff碱型大环化合物，如L^1和配合物L^2Ba(ClO4)2，L^3Ba(ClO4)2和L^4Ba (ClO4)2.L^2-L^4的Ba^2+配合物经与NaSO4水溶液反应解络，得到自由配体L^2， L^3和L^4，配体L^2和L^3分别与Sr^2+作用，得到配合物L^2Sr(ClO4)2和L^3Sr (ClO4)2。上述大环配体和各种配合物均经元素分析，IR，^1H NMR，MS等证实了它 们的结构和组成。     

异丙氧基-异羟肟酸-氧钒（V）配合物的合成、晶体结构和量子化学研究

以苯甲酰异羟肟酸为配体，首先合成四价氧钒化合物，以此为基础合成了标题 化合物，并用元素分析，红外光谱，~1H NMR，~(13)C NMR，~(15)V NMR，电子吸 收光谱等，分别对它进行了表征，其结构用单晶X射线衍射法测定，晶体属三斜晶 系，P1-bar空间群，所得晶体学参数为a = 1.1119(3) nm，b = 1.1735(3) nm，c = 0.8660(2) nm，α = 96.84(1)°，β = 106.93)(1)°，γ = 88.97(1)°，V = 1.0731(2) nm~3，D_c = 1.415 g/cm~3，Z = 2，F(000) = 478，μ = 5.06 cm~(-1)。采取ab initio(GTO-6-31d)方法对标题化合物的结构单元的成键情况进 行了分析，讨论了化合物的稳定性、分子轨道能量、原子静电荷分布等情况。     

Standardisation of elemental analytical techniques applied to provenance studies of archaeological ceramics: an inter laboratory calibration study

Chemical analysis is a well-established procedure for the provenancing of archaeological ceramics. Various analytical techniques are routinely used and large amounts of data have been accumulated so far in data banks. However, in order to exchange results obtained by different laboratories, the respective analytical procedures need to be tested in terms of their inter-comparability. In this study, the schemes of analysis used in four laboratories that are involved in archaeological pottery studies on a routine basis were compared. The techniques investigated were neutron activation analysis (NAA), X-ray fluorescence analysis (XRF), inductively coupled plasma optical emission spectrometry (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS). For this comparison series of measurements on different geological standard reference materials (SRM) were carried out and the results were statistically evaluated. An attempt was also made towards the establishment of calibration factors between pairs of analytical setups in order to smooth the systematic differences among the results.     

A re-statement of the Hohenberg–Kohn theorem and its extension to finite subspaces

Bearing in mind the insight into the Hohenberg–Kohn theorem for Coulomb systems provided recently by Kryachko (Int J Quantum Chem 103:818, 2005), we present a re-statement of this theorem through an elaboration on Lieb’s proof as well as an extension of this theorem to finite subspaces. Contribution to the Serafin Fraga Memorial Issue.     

Selenium in electrolytic manganese as a reference material for the quality control of aluminium melts

Electrolytic manganese is an important alloying element for aluminium and steel melts. It is mainly added to melts of aluminium in the holding furnace as tablets or minitablets (compressed compacts of manganese and aluminium powders). Selenium derivates are usually added during the production of electrolytic manganese, so some selenium is present in the alloys produced when electrolytic manganese is added to the aluminium furnace. Since the selenium contents of many alloys are of concern from health and environmental perspectives, their values should be provided. In this work, a laboratory reference material (LRM) based on electrolytic manganese was produced to assure our routine quality control method, where selenium is analysed by hydride generation followed by optical emission spectrometry with inductively coupled plasma (HG–ICP–OES). Therefore, the present paper describes in detail the preparation procedure for and the results from homogeneity and stability studies performed on electrolytic manganese LRM. For this purpose, a commercial electrolytic manganese lot was selected and the main factors involved in the preparation of the material (pretreatment step, homogenization, bottling and storage) were carefully studied and established in order to guarantee the long-term stability of the LRM. The results obtained showed that the LRM developed was a fit-for-purpose material for the quality control of the routine analysis of selenium.     

Molecular dynamics simulations of the mononuclear zinc-beta-lactamase from Bacillus cereus complexed with benzylpenicillin and a quantum chemical study of the reaction mechanism

Herein, we present results from MD simulations of the Michaelis complex formed between the B. cereus zinc-beta-lactamase enzyme and benzylpenicillin. The structural and dynamical effects induced by substrate-binding, the specific role of the conserved residues, and the near attack conformers of the Michaelis complex are discussed. Quantum chemical methods (HF/6-31G* and B3LYP/6-31G*) are also applied to study the hydrolysis reaction of N-methylazetidinone catalyzed by a monozinc system consisting of the side chains of the histidine residues (His86, His88, and His149) complexed with Zn-OH and the side chains of Asp90 and His210. From this model system, we built molecular-mechanics representations of the prereactive complex and transition state configurations docked into the active site. Linear-scaling semiempirical calculations coupled with a continuum solvent model were then performed on these static models. We propose that the experimental rate data for the B. cereus enzyme is compatible with a one-step mechanism for the hydrolysis of beta-lactam substrates in which His210 acts as a proton donor.     

Chemical reactivity of analogous technetium(V) and rhenium(V) dioxo complexes

All complexes of the series [MO₂L₂]⁺ (M=Tc, Re; L=ethylenediamine (en), 1,3-diaminopropane (1,3-dap)) have been synthesized and their chemical reactivities investigated. The following properties were studied: stability of the aqueous solutions at different pH values, substitution kinetics, lipophilicity and protein binding. The complexes show very similar reactivity in aqueous solution. From a radiopharmaceutical point of view, no significant difference in their in vivo behavior is expected.     

Thermal properties of cyanatocopper(II) complexes with pyridine,bipyridine and phenanthroline

The thermal properties of cyanatocopper complexes with pyridine, bipyridine and phenanthroline are described in this paper. It was found that the thermal stabilities of the complexes were found to increase in the order pybipy2(NCS)₂ (L=pyridine and its methyl derivates) which are composed of the liberation of ligandsL and redox reactions of thiocyanate ligands with the central Cu(II) atom [1, 2]. The decomposition temperature of thiocyanate ligands depends on the properties of the ligandsL present in the coordination sphere. An analogous course of thermal decomposition was also observed for [Cu(bipy)₂(NCX)](NCX) (X=S or Se) [3]. For the phenanthroline complexes [Cu(phen)₂(NCX)₂] (X=S or Se) the thermal stability was found to increase significantly (by about 140C) and the decomposition stoichiometry was also changed [3].The present paper contains the results of thermoanalytical studies on bipyridine and phenanthroline cyanatocopper complexes, and a comparison of the thermal properties of pyridine cyanato and isothiocyanatocopper complexes.     

Water absorption of a diglycidyl ether of bisphenol A/1,3-bisaminomethylcyclohexane (DGEBA/1,3-BAC) epoxy resin system

The diffusive and dynamic mechanical behavior of the DGEBA/1,3-BAC epoxy resin system was studied during water absorption. The diffusion of water was investigated at 100% relative humidity, by immersion of specimens in water at 60, 80 and 100°C. In all absorption experiments, water diffusion followed Fick's law. Diffusion coefficients and saturated water concentrations are given for these temperatures. The activation energy for diffusion was determined from the relationship between the diffusion coefficient and the reciprocal of the absolute temperature. The value obtained was 31.2 kJ mol^–1. Dynamic mechanical analysis of samples immersed in 100°C water and with various water contents showed both a shift of T_g, defined by thetan peak, to lower temperatures and a slight decrease in the dynamic modulus in the presence of water. These effects are probably a result of plasticization.This work was supported by the Xunta de Galicia through grant XUGA-17201A92.     

Enzyme catalysis in organic solvents: a promising field for optical biosensing

The ability of enzymes to work in non-aqueous media offers new and almost unexploited possibilities for the development of new optical biosensors. The advantages of performing biocatalytic reactions in non-aqueous media are discussed in relation to their possible application in optical biosensor design. Attention is focused on the factors that influence enzymatic catalysis in organic solvents, including the role of enzyme-associated water, criteria for solvent selection and the alteration of enzyme specificity. Recent examples of relevant applications and future prospects of organic-phase optical biosensing are discussed.