Determination of sulfonic acids and alkylsulfates by ion chromatography in water

A fast ion chromatographic method with suppressed conductivity detection has been developed for the simultaneous determination of methane-, ethane-, 1-propane-, 1-butane-, 1-pentane-, 1-hexane-, 1-heptane-, 1-octane-, 1-nonane-, 1-decane-, 1-dodecane-, dodecylbenzene-, p-toluene-, benzenesulfonic acids, octylsulfate and dodecylsulfate in water samples. Due to the high number of analytes and their heterogeneity, the effect of the mobile phase parameters (NaOH, CH(3)OH and CH(3)CN concentration) on the retention factors has been studied in detail, so achieving, for the first time, the separation among 15 of these analytes by a gradient elution. Detection limits included within 0.06-0.16 microM have been obtained. Interferences from Cl(-), NO(3)(-) and SO(4)(2-), possible anions present in water samples, have been considered and a SPE procedure has been developed for analytes enrichment and matrix removal in a seawater sample. This is the first application of an ion-exchange chromatographic method to a seawater sample for this kind of analytes.     

High performance ion chromatography of haloacetic acids on macrocyclic cryptand anion exchanger

A new high performance ion chromatographic method has been developed for the separation of the nine chlorinated-brominated haloacetic acids (HAAs) that are the disinfection by-products of chlorination of drinking water, using a macrocycle-based adjustable-capacity anion-exchange separator column (IonPac Cryptand A1). A gradient method based on theoretical and experimental considerations has been optimized in which 10 mM NaOH-LiOH step gradient was performed at the third minute of the analysis. The optimized method allowed us to separate the nine HAAs and seven possibly interfering inorganic anions in less than 25 min with acceptable resolution. The minimum concentrations detectable for HAAs were between 8.0 (MBA) and 210 (TBA) microg L(-1), with linearity included between 0.9947 (TBA) and 0.9998 (MBA). To increase sensitivity, a 25-fold preconcentration step on a reversed phase substrate (LiChrolut EN) has been coupled. Application of this method to the analysis of haloacetic acids in real tap water samples is illustrated.     

Synthesis and intramolecular and interionic structural characterization of half-sandwich (arene)ruthenium(II) derivatives of bis(pyrazolyl)alkanes

Arene ruthenium(II) complexes containing bis(pyrazolyl)methane ligands have been prepared by reacting the ligands L' (L' in general; specifically L(1) = H(2)C(pz)(2), L(2) = H(2)C(pz(Me2))(2), L(3) = H(2)C(pz(4Me))(2), L(4) = Me(2)C(pz)(2) and L(5) = Et(2)C(pz)(2) where pz = pyrazole) with [(arene)RuCl(mu-Cl)](2) dimers (arene = p-cymene or benzene). When the reaction was carried out in methanol solution, complexes of the type [(arene)Ru(L')Cl]Cl were obtained. When L(1), L(2), L(3), and L(5) ligands reacted with excess [(arene)RuCl(mu-Cl)](2), [(arene)Ru(L')Cl][(arene)RuCl(3)] species have been obtained, whereas by using the L(4) ligand under the same reaction conditions the unexpected [(p-cymene)Ru(pzH)(2)Cl]Cl complex was recovered. The reaction of 1 equiv of [(p-cymene)Ru(L')Cl]Cl and of [(p-cymene)Ru(pzH)(2)Cl]Cl with 1 equiv of AgX (X = O(3)SCF(3) or BF(4)) in methanol afforded the complexes [(p-cymene)Ru(L')Cl](O(3)SCF(3)) (L' = L(1) or L(2)) and [(p-cymene)Ru(pzH)(2)Cl]BF(4), respectively. [(p-cymene)Ru(L(1))(H(2)O)][PF(6)](2) formed when [(p-cymene)Ru(L(1))Cl]Cl reacts with an excess of AgPF(6). The solid-state structures of the three complexes, [(p-cymene)Ru{H(2)C(pz)(2)}Cl]Cl, [(p-cymene)Ru{H(2)Cpz(4Me))(2)}Cl]Cl, and [(p-cymene)Ru{H(2)C(pz)(2)}Cl](O(3)SCF(3)), were determined by X-ray crystallographic studies. The interionic structure of [(p-cymene)Ru(L(1))Cl](O(3)SCF(3)) and [(p-cymene)Ru(L')Cl][(p-cymene)RuCl(3)] (L' = L(1) or L(2)) was investigated through an integrated experimental approach based on NOE and pulsed field gradient spin-echo (PGSE) NMR experiments in CD(2)Cl(2) as a function of the concentration. PGSE NMR measurements indicate the predominance of ion pairs in solution. NOE measurements suggest that (O(3)SCF(3))(-) approaches the cation orienting itself toward the CH(2) moiety of the L(1) (H(2)C(pz)(2)) ligand as found in the solid state. Selected Ru species have been preliminarily investigated as catalysts toward styrene oxidation by dihydrogen peroxide, [(p-cymene)Ru(L(1))(H(2)O)][PF(6)](2) being the most active species.     

Full-fledged proteomic analysis of bioactive wheat amylase inhibitors by a 3-D analytical technique: Identification of new heterodimeric aggregation states

Wheat proteinaceous alpha-amylase inhibitors (alpha-AIs) are increasingly investigated for their agronomical role as natural defence molecules of plants against the attack of insects and pests, but also for their effects on human health. The wheat genomes code for several bioactive alpha-AIs that share sequence homology, but differ in their specificity against alpha-amylases from different species and for their aggregation states. Wheat alpha-AIs are traditionally classified as belonging to the three classes of tetrameric, homodimeric and monomeric forms, each class being constituted by a number of polypeptides that display different electrophoretic mobilities. Here we describe a proteomic approach for the identification of bioactive alpha-AIs from wheat and, in particular, a 3-D technique that allows to best identify and characterize the dimeric fraction. The technique takes advantage of the thermal resistance of alpha-AIs (resistant to T > 70 degrees C) and consists in the separation of protein mixtures by 2-D polyacrylamide/starch electrophoresis under nondissociating PAGE (ND-PAGE, first dimension) and dissociating (urea-PAGE or U-PAGE second dimension) conditions, followed by in-gel spontaneous reaggregation of protein complexes and identification of the alpha-amylase inhibitory activity (antizymogram, third dimension) using enzymes from human salivary glands and from the larvae of Tenebrio molitor coleopter (yellow mealworm). Dimeric alpha-AIs from Triticum aestivum (bread wheat) were observed to exist as heterodimers. The formation of heterodimeric complexes was also confirmed by in vitro reaggregation assays carried out on RP-HPLC purified wheat dimeric alpha-AIs, and their bioactivity assayed by antizymogram analysis. The present 3-D analytical technique can be exploited for fast, full-fledged identification and characterization of wheat alpha-AIs.     

Structural and thermodiffractometric analysis of coordination polymers. Part I: tin derivatives of the Bim ligand [Bim = Bis(1-imidazolyl)methane])

New polynuclear coordination species containing the ditopic bis(1-imidazolyl)methane (Bim) ligand have been prepared as microcrystalline powders and structurally characterized by ab initio X-ray powder diffraction methods. [Bim(Me2SnCl2)]n (1), [Bim(nBu2SnCl2)]n (3), [Bim(Ph2SnCl2)]n (4), [Bim(MeSnCl3)]n (5), and [Bim(PhSnCl3)]n (6) all contain 1D chains with octahedral tin atoms with trans N-Sn-N linkages (but 4, which displays a cis N-Sn-N linkage). Their thermodiffractometric analysis allowed the estimation of the linear thermal expansion coefficients and strain tensors derived there from. The potential-energy surface of the free Bim ligand (as defined by two torsional degrees of freedom about the two N-CH2 bonds), eventually controlling the length of the repeating unit (polymer elongation), has been estimated using molecular mechanics and correlated with experimental observations.     

Neutral,Cationic, and Anionic Alkyl Derivatives of Tungsten Bonded to a Calix[4]arene Oxo Surface

The chemically reversible reduction of [(Me)₂W(calix)] to the diamagnetic [(Me)₂W(calix)Na₂] [Eq. (1)], without major changes in the connectivity of the molecule, illustrates the flexibility of the calixarene ligand and stresses its potential as a molecular functional model of heterogeneous oxo surfaces.     

Compared EC-AFM Analysis of Laser-Induced Graphene and Graphite Electrodes in Sulfuric Acid Electrolyte

Flexible and economic sensor devices are the focus of increasing interest for their potential and wide applications in medicine, food analysis, pollution, water quality, etc. In these areas, the possibility of using stable, reproducible, and pocket devices can simplify the acquisition of data. Among recent prototypes, sensors based on laser-induced graphene (LIGE) on Kapton represent a feasible choice. In particular, LIGE devices are also exploited as electrodes for sensing in liquids. Despite a characterization with electrochemical (EC) methods in the literature, a closer comparison with traditional graphite electrodes is still missing. In this study, we combine atomic force microscopy with an EC cell (EC-AFM) to study, in situ, electrode oxidation reactions when LIGE or other graphite samples are used as anodes inside an acid electrolyte. This investigation shows the quality and performance of the LIGE electrode with respect to other samples. Finally, an ex situ Raman spectroscopy analysis allows a detailed chemical analysis of the employed electrodes.     

Hybridization of Nafion membranes with an acid functionalised polysiloxane: Effect of morphology on water sorption and proton conductivity

Polysiloxane-modified hybrid Nafion membranes were prepared by casting a mixture of Nafion solution and a precursor of acid functionalised polysiloxane based on tetraethoxysilane and a mercaptan-organoalkoxysilane.Scanning Electron Microscopy (SEM) and Atomic Force Microscopy analysis revealed that the functionalised polysiloxane was dispersed either as finely nanosized inclusions or as coarse domains depending on the rate of the solvent evaporation during the casting procedure. In particular the slower is the rate of solvent evaporation the more interpenetrated and homogenously dispersed at nanosized level is the polysiloxane inside the Nafion membrane.The hybridization process increases the thermal stability of the membranes of about 50 °C relatively to the unmodified Nafion. Small angle X-ray scattering (SAXS) analysis reveals that the hybrid membranes exhibited the typical morphology of Nafion consisting of distinct hydrophilic and hydrophobic domains.Water vapor sorption and proton conductivity were measured varying the temperature (up to 120 °C) and the water activity conditions (from 0.1 to 0.8). The polysiloxane network always increases the water vapor uptake of the membranes and increases significantly the proton conductivity at higher temperature depending on the type of morphology developed by the manufacturing method. In particular hybrid membranes exhibiting nanosized polysiloxane dispersion show a proton conductivity which is up to one-and-half time higher than Nafion recast membrane at high temperature and low water content.     

Effects of thermal history in the ring opening polymerization of CBT and its mixtures with montmorillonite on the crystallization of the resulting poly(butylene terephthalate)

Differential scanning calorimetry was used to study the thermal characteristics and morphological structure of species produced during the ring opening polymerization of cyclic butylene terephthalate (CBT). Thermal programs consisting of a first ramp heating scan and an isothermal step, followed by cooling and a second ramp heating step, were used to study the effects of thermal history, catalyst (butyl chlorotin dihydroxide) at concentrations between 0.1 and 1.3% (w/w), and the presence of a layered silicate nanofiller (montmorillonite at 4.0%, w/w) on the structure of the resulting polymer (poly(butylene terephthalate), pCBT). Wide angle X-ray diffraction was used to monitor the degree of exfoliation of the nanocomposites.It was found that pCBT is formed in the amorphous state, and crystallizes during the heating step or during the isothermal step at temperatures lower than the equilibrium melting temperature of the polymer (). When premixed with the nanofiller, irrespective of whether this was previously intercalated with a tallow surfactant or used in its pristine form, polymerization took place at higher temperatures and most of the crystallization was found to occur during the cooling stage. In those cases where crystallization took place during either the first heating scan, or during a prolonged isothermal step below the of the polymer, the resulting crystals were found to have a higher lamellar thickness, as compared with the same polymer crystallized from the melt during the cooling step from temperatures above the polymer .