Synthesis of Amphiphilic Fullerene Derivatives and Their Incorporation in Langmuir and Langmuir‐Blodgett Films

Various amphiphilic fullerene derivatives were prepared by functionalization of [5,6]fullerene‐C₆₀‐I_h (C₆₀) with malonate or bis‐malonate derivatives obtained by esterification of the malonic acid mono‐esters 5 – 7 . Cyclopropafullerene 10 was obtained by protection of the carboxylic acid function of 6 as a tert‐butyl ester, followed by Bingel addition to C₆₀ and a deprotection step (Scheme 2). The preparation of 10 was also attempted directly from the malonic acid mono‐ester 6 under Bingel conditions. Surprisingly, the corresponding 3′‐iodo‐3′H‐cyclopropa[1,9][5,6]fullerene‐C₆₀‐I_h‐3′‐carboxylate 11 was formed instead of 10 (Scheme 3). The general character of this new reaction was confirmed by the preparation of 15 and 16 from the malonic acid mono‐esters 13 and 14 , respectively (Scheme 4). All the other amphiphilic fullerene derivatives were prepared by taking advantage of the versatile regioselective reaction developed by Diederich and co‐workers which led to macrocyclic bis‐adducts of C₆₀ by a cyclization reaction at the C‐sphere with bis‐malonate derivatives in a double Bingel cyclopropanation. The bis‐adducts 37 – 39 with a carboxylic acid polar head group and four pendant long alkyl chains of different length were prepared from diol 22 and acids 5 – 7 , respectively (Scheme 9). In addition, the amphiphilic fullerene derivatives 45, 46, 49, 54 , and 55 bearing different polar head groups and compound 19 with no polar head group were synthesized (Schemes 11–13, 15, and 5, resp.). The ability of all these compounds to form Langmuir monolayers at the air‐water interface was investigated in a systematic study. The films at the water surface were characterized by their surface pressure vs. molecular area isotherms, compression and expansion cycles, and Brewster‐angle microscopy. The spreading behavior of compound 10 was not good, the two long alkyl chains in 10 being insufficient to prevent aggregation resulting from the strong fullerene‐fullerene interactions. While no films could be obtained from compound 19 with no polar head group, all the corresponding amphiphilic fullerene bis‐adducts showed good spreading characteristics and reversible behavior upon successive compression/expansion cycles. The encapsulation of the fullerene in a cyclic addend surrounded by four long alkyl chains is, therefore, an efficient strategy to prevent the irreversible aggregation resulting from strong fullerene‐fullerene interactions usually observed for amphiphilic C₆₀ derivatives at the air‐water interface. The balance of hydrophobicity to hydrophilicity was modulated by changing the length of the surrounding alkyl chains or the nature of the polar head group. The best results in terms of film formation and stability were obtained with the compounds having the largest polar head group, i.e. 45 and 46 , and dodecyl chains. Finally, the Langmuir films obtained from the amphiphilic fullerene bis‐adducts were transferred onto solid substrates, yielding high‐quality Langmuir‐Blodgett films.     

Protein Protection by Antioxidants: Development of a Convenient Assay and Structure‐Activity Relationships of Natural Polyphenols

In this work, a convenient test of antioxidant activity was developed, with BChE‐contaminated HSA as the target of AAPH‐induced oxidation and its esterase activity as the marker of protein integrity or degradation. The method is relatively simple, of low cost, and convenient to use. Its application to natural polyphenols showed that quercetin ( 1 ), verbascoside ( 2 ), chlorogenic acid ( 3 ), caffeic acid ( 4 ), 1,3,6,7‐tetrahydroxyxanthone ( 5 ), and mangiferin ( 6 ), are good antioxidants (IC₅₀<9 μM ). 1,5‐Dihydroxy‐3‐methoxyxanthone ( 7 ), flemichin D ( 8 ), and cordigone ( 9 ) showed modest activities (ca. 50 μM <IC₅₀<350 μM ), whereas danthrone ( 10 ) was inactive. Complementary experiments with two of the more active antioxidants, namely quercetin ( 1 ) and chlorogenic acid ( 3 ) showed that both antioxidants were better radical scavengers than chain‐breaking antioxidants. The relative adiabatic oxidation potential (ΔH_ox), the relative H‐bond dissociation energy (ΔH_abs), and the first oxidation potential measured by cyclic voltammetry were found to be related to the radical‐scavenging activity of these antioxidants.     

Identification and separation of saxitoxins using hydrophilic interaction liquid chromatography coupled to traveling wave ion mobility‐mass spectrometry

The aim of this work was to develop a reliable and efficient analytical method to characterise and differentiate saxitoxin analogues (STX), including sulphated (gonyautoxins, GTX) and non‐sulphated analogues. For this purpose, hydrophilic interaction liquid chromatography (HILIC) was used to separate sulphated analogues. We also resorted to ion mobility spectrometry to differentiate the STX analogues because this technique adds a new dimension of separation based on ion gas phase conformation. Positive and negative ionisation modes were used for gonyautoxins while positive ionisation mode was used for non‐sulphated analogues. Subsequently, the coupling of these three complementary techniques, HILIC‐IM‐MS, permitted the separation and identification of STX analogues; isomer differentiation was achieved in HILIC dimension while non‐sulphated analogues were separated in the IM‐MS dimension. Additional structural characteristics concerning the conformation of STXs could be obtained using IM‐MS measurements. Thus, the collision cross sections (CCS) of STXs are reported for the first time in the positive ionisation mode. These experimental CCSs correlated well with the calculated CCS values using the trajectory method. Copyright © 2015 John Wiley & Sons, Ltd.     

Cobalt-mediated cyclic and linear 2:1 cooligomerization of alkynes with alkenes: a DFT study

The mechanism of the cobalt-mediated [2 + 2 + 2] cycloaddition of two alkynes to one alkene to give CpCo-complexed 1,3-cyclohexadienes (cyclic oligomerization) has been studied by means of DFT computations. In contrast to the mechanism of alkyne cyclotrimerization, in which final alkyne inclusion into the common cobaltacyclopentadiene features a direct "collapse" pathway to the complexed arene, alkene incorporation proceeds via insertion into a Co-C sigma-bond rather than inter- or intramolecular [4 + 2] cycloaddition. The resulting seven-membered metallacycle 7 is a key intermediate which leads to either CpCo-complexed cyclohexadiene 5 or hexatriene 13. The latter transformation, particularly favorable for ethene, accounts, in part, for the linear oligomerization observed occasionally in these reactions. With aromatic double bonds, a C-H activation mechanism by the cobaltacyclopentadiene seems more advantageous in hexatriene product formation. Detailed investigations of high- and low-spin potential energy surfaces are presented. The reactivity of triplet cobalt species was found kinetically disfavored over that of their singlet counterparts. Moreover, it could not account for the formation of CpCo-complexed hexatrienes. However, triplet cobalt complexes cannot be ruled out since all unsaturated species appearing in this study were found to exhibit triplet ground states. Consequently, a reaction pathway that involves a mixing of both spin-state energy surfaces is also described (two-state reactivity). Support for such a pathway comes from the location of several low-lying minimum-energy crossing points (MECPs) of the two surfaces.     

Portable single-sided NMR measurements at variable temperatures: Implementation of a thermo-controlled device and application to the heating of bread dough

A temperature control unit was implemented to vary the temperature of samples studied on a commercial Mobile Universal Surface Explorer nuclear magnetic resonance (MOUSE-NMR) apparatus. The device was miniaturized to fit the maximum MOUSE sampling depth (25 mm). It was constituted by a sample holder sandwiched between two heat exchangers placed below and above the sample. Air was chosen as the fluid to control the temperature at the bottom of the sample, at the interface between the NMR probe and the sample holder, in order to gain space. The upper surface of the sample was regulated by the circulation of water inside a second heat exchanger placed above the sample holder. The feasibility of using such a device was demonstrated first on pure water and then on several samples of bread dough with different water contents. For this, T1 relaxation times were measured at various temperatures and depths and were then compared with those acquired with a conventional compact closed-magnet spectrometer. Discussion of results was based on biochemical transformations in bread dough (starch gelatinization and gluten heat denaturation). It was demonstrated that, within a certain water level range, and because of the low magnetic field strength of the MOUSE, a linear relationship could be established between T1 relaxation times and the local temperature in the dough sample.     

Glyphosate–Exonuclease Interactions: Reduced Enzymatic Activity as a Route to Glyphosate Biosensing

N-phosphonomethyle-glycine (glyphosate) is the most widely used pesticide worldwide due to its effectiveness in killing weeds at a moderate cost, bringing significant economic benefits. However, owing to its massive use, glyphosate and its residues contaminate surface waters. On site, fast monitoring of contamination is therefore urgently needed to alert local authorities and raise population awareness. Here the hindrance of the activity of two enzymes, the exonuclease I (Exo I) and the T5 exonuclease (T5 Exo) by glyphosate, is reported. These two enzymes digest oligonucleotides into shorter sequences, down to single nucleotides. The presence of glyphosate in the reaction medium hampers the activity of both enzymes, slowing down enzymatic digestion. It is shown by fluorescence spectroscopy that the inhibition of ExoI enzymatic activity is specific to glyphosate, paving the way for the development of a biosensor to detect this pollutant in drinking water at suitable detection limits, i.e., 0.6 nm .     

Octonionic representations of Clifford algebras and triality

The theory of representations of Clifford algebras is extended to employ the division algebra of the octonions or Cayley numbers. In particular, questions that arise from the nonassociativity and noncommutativity of this division algebra are answered. Octonionic representations for Clifford algebras lead to a notion of octonionic spinors and are used to give octoninic representations of the respective orthogonal groups. Finally, the triality automorphisms are shown to exhibit a manifest ₃ ×SO(8) structure in this framework.     

Facile Synthesis of Diastereoisomerically and Optically Pure 2‐Substituted Hexahydro‐1H‐pyrrolizin‐3‐ones

We report a short synthetic route that provides optically active 2‐substituted hexahydro‐1H‐pyrrolizin‐3‐ones in four steps from commercially available Boc (tert‐but(oxy)carbonyl))‐protected proline. Diastereoisomers (−)‐ 11 and (−)‐ 12 were assembled from the proline‐derived aldehyde (−)‐ 8 and ylide 9 via a Wittig reaction and subsequent catalytic hydrogenation (Scheme 3). Cleavage of the Boc protecting group under acidic conditions, followed by intramolecular cyclization, afforded the desired hexahydro‐1H‐pyrrolizinones (−)‐ 1 and (+)‐ 13 . Applying the same protocol to ylide 19 afforded hexahydro‐1H‐pyrrolizinones (−)‐ 25 and (−)‐ 26 (Scheme 5). The absolute configuration of the target compounds was determined by a combination of NMR studies (Figs. 1 and 2) and X‐ray crystallographic analysis (Fig. 3).     

N‐Arylated 3,5‐Dihydro‐4H‐dinaphtho[2,1‐c:1′,2′‐e]azepines: Axially Chiral Donors with High Helical Twisting Powers for Nonplanar Push–Pull Chromophores

Axially chiral, N‐arylated 3,5‐dihydro‐4H‐dinaphtho[2,1‐c:1′,2′‐e]azepines have been prepared by short synthetic protocols from enantiopure 1,1′‐bi(2,2′‐naphthol) (BINOL) and anilines. Alkynes substituted with two N‐phenyldinaphthazepine donors readily undergo a formal [2+2] cycloaddition, followed by retro‐electrocyclization, with tetracyanoethene (TCNE) to yield donor‐substituted 1,1,4,4‐tetracyanobuta‐1,3‐dienes (TCBDs) featuring intense intramolecular charge‐transfer (CT) interactions. A dicyanovinyl derivative substituted with one N‐phenyldinaphthazepine donor was obtained by a “one‐pot” oxidation/Knoevenagel condensation from the corresponding propargylic alcohol. Comparative electrochemical, X‐ray crystallographic, and UV/Vis studies show that the electron‐donor qualities of N‐phenyldinaphthazepine are similar to those of N,N‐dimethylanilino residues. The circular dichroism (CD) spectrum of a push–pull chromophore incorporating the chiral donor moiety features Cotton effects of exceptional intensity. With their elongated shape and the rigidity of the chiral N‐aryldinaphthazepine donors, these chromophores are effective inducers of twist distortion in nematic liquid crystals (LCs). Thus, a series of the dinaphthazepine derivatives was used as dopants in the nematic LC E7 (Merck) and high helical twisting powers (β) of the order of hundreds of μm^?1 were measured. Theoretical calculations were employed to elucidate the relation between the structure of the dopants and their helical twisting power. For the derivatives with two dinaphthazepine moieties, a strong dependence of the β‐values on the structure and conformation of the linker between them was found.     

Contrast or assimilation: choosing camps in simple or realistic modeling

The contrast effect is a psychological phenomenon in which people exaggerate their differences. When making social comparisons, people cope with the discomforts associated with negative comparisons by criticizing others and splitting into smaller groups of similar others or by assimilation, depending on whether they perceive themselves as the member of a majority or minority group, respectively. This contrast or assimilation phenomena can explain the exaggeration of differences among computational simulation scholars. Those exaggerations are discussed in this paper as well as some realistic reasons for differences. Recognition of our status as minority group members and the virtues of assimilation and mutual support are advocated.