Photo-Fries reaction in water made selective with a capsule

The water soluble capsule formed by a deep cavity cavitand with eight carboxylic acid groups controls product distribution during photo-Fries rearrangement of naphthyl esters in water by restricting the mobility of primary singlet radical pair.     

Estimating the Hurst Parameter

Let be a fractional Brownian motion with parameter 0 < H < 1. We are interested in the estimation of this parameter. To achieve this goal, we consider certain functionals of the second order increments of b _H (·), using variation technics. Based on an almost-sure convergence theorem for general functionals, we single out particular functionals that allows to construct certain regression models for the parameter H. We show that this regression based estimator for H is asymptotically unbiased, consistent and that it satisfies a Central Limit Theorem.      

Fluorescence polarization biosensor based on an aptamer enzymatic cleavage protection strategy

A novel fluorescence polarization (FP) aptasensing platform based on target-induced aptamer enzymatic cleavage protection is reported. The method relies on the FP analysis of the phosphodiesterase I mediated size variation of a dye-labeled aptamer. The tyrosinamide/antityrosinamide DNA aptamer couple was firstly tested as a model system to establish the proof-of-concept. In the absence of the target, the labeled aptamer was enzymatically cleaved into small DNA fragments, leading to a low FP signal. Upon tyrosinamide binding, the DNA substrate was partially protected against the enzymatic attack, leading to an increase in the fluorescence anisotropy response as a result of the higher average molecular volume of the weakly digested probe. The method was subsequently applied to two other systems, i.e., for the detection of ochratoxin A and adenosine. Such an approach was found to combine simplicity and general applicability features.     

Direct Electron Transfer of Hemoglobin and Myoglobin at the Bare Glassy Carbon Electrode in an Aqueous BMI.BF4 Ionic‐Liquid Mixture

Direct and remarkably fast electron transfers between a bare glassy carbon electrode and heme proteins (hemoglobin or myoglobin) are obtained by using an aqueous 1‐butyl‐3‐methyl imidazolium tetrafluoroborate (BMI.BF₄) ionic‐liquid mixture as electrolyte. The ionic liquid is observed to play a key role in the achievement of the electron transfer. The experimental data show that the proteins are not strongly adsorbed onto the electrode surface while giving rise to sharp and well‐defined redox responses. Such a finding contrasts with most of the reported works found in literature and—beyond the fundamental aspect—it may be of interest in applications where adsorption is critical. Moreover, the electrocatalytic activity of the proteins toward the reduction of oxygen and nitrite in the aqueous BMI.BF₄ mixture is evidenced, showing the potential of this simple approach for bioelectroanalytical devices.     

Use of polyols as particle size and shape controllers: application to boehmite synthesis from sol-gel routes

Polyols were successfully used as size and shape controllers of oxide nanoparticles synthesized by soft chemistry in aqueous solution. The efficiency of acyclic polyols as a complexing agent depends obviously on the number of OH groups bonded to the carbon chain (and thus on the carbon chain length), but also on their stereochemistry. This innovating way to control morphology has been experienced for the synthesis of boehmite nanoparticles, whose morphology variations related to xylitol adsorption (C5 alditol) have been previously reported. The use of polyols during synthesis causes a modification of the usual morphologies observed, specifically resulting in an increase of (101) faces area. It is evidenced here that the variations of the nanoparticle aspect ratio are related to polyol complexing ability, and more specifically to molecule topology and configuration. Indeed, the morphology variations increase as a function of polyol carbon chain length and number of hydroxyl groups, and is much pronounced for stereoisomers exhibiting hydroxyl groups all oriented on the same side of the molecule (threo-threo sequences). Thanks to these various polyols used, we showed how the progressive levels of complexing ability allow us to tune boehmite particle size and shape. Material characterizations were performed using relevant methods such as X-ray diffraction powder pattern simulation and zetametry in addition to transmission electron microscopy. Since γ-alumina is obtained from boehmite by a topotactic transformation, we expect that this method will provide a promising way to control surface properties of γ-alumina, an important industrial catalyst support.     

Synthesis and antiplasmodial activity of streptocyanine/peroxide and streptocyanine/4-aminoquinoline hybrid dyes

Two series of streptocyanine dyes incorporating cyclic peroxide or 4-aminoquinoline moieties are prepared and X-ray diffraction structures for three compounds are determined. All hybrid dyes show good antiplasmodial activity (0.06 to 0.66 μM) and are not or are slightly cytotoxic, except 10a.     

Expanding the chemical space for push-pull chromophores by non-concerted [2+2] and [4+2] cycloadditions: access to a highly functionalised 6,6-dicyanopentafulvene with an intense, low-energy charge-transfer band

Non-concerted [2+2] and [4+2] cycloadditions between N,N-dimethylanilino-substituted 1,1,2,4,4-pentacyanobuta-1,3-diene and 4-ethynyl-N,N-dimethylaniline are controlled by solvent polarity and provide access to a highly functionalised 6,6-dicyanopentafulvene featuring an intense, low-energy charge-transfer band and to an unusual spirocyclic zwitterion, characterised by X-ray analysis.     

Enantioselective Ir(I)-catalyzed carbocyclization of 1,6-enynes by the chiral counterion strategy

Enantioenriched bicyclo[4.1.0]hept-2-enes were synthesized by Ir(I)-catalyzed carbocyclization of 1,6-enynes. No chiral ligands were used, CO and PPh(3) were the only ligands bound to iridium. Instead, the stereochemical information was localized on the counterion of the catalyst, generated in situ by reaction of Vaska's complex (trans-[IrCl(CO)(PPh(3))(2)]) with a chiral silver phosphate. Enantiomeric excesses up to 93% were obtained when this catalytic mixture was used. (31)P NMR and IR spectroscopy suggest that formation of the trans- [Ir(CO)(PPh(3))(2)](+) moiety occurs by chlorine abstraction. Moreover, density functional theory calculations support a 6-endo-dig cyclization promoted by this cationic moiety. The chiral phosphate anion (O-P*) controls the enantioselectivity through formation of a loose ion pair with the metal center and establishes a C-H···O-P* hydrogen bond with the substrate. This is a rare example of asymmetric counterion-directed transition-metal catalysis and represents the first application of such a strategy to a C-C bond-forming reaction.     

13C tracer recovery in human stools after digestion of a fat-rich meal labelled with [1,1,1-13C3]tripalmitin and [1,1,1-13C3]triolein

Lipid metabolism studies focus mainly on oxidation and storage but rarely on faecal elimination, which is needed to assess total lipid distribution during the postprandial period. The purpose of the present work was to set up and validate the analysis of lipid tracers in stools, with an aim of later using this methodology in studies of postprandial lipid tracer metabolism. Eight subjects received a mixture of [1,1,1-(13)C3]tripalmitin and [1,1,1-(13)C3]triolein with a fat-rich meal. The nature and amounts of (13)C lipids excreted in stools during 3 days post-dose were determined by gas chromatography/mass spectrometry (GC/MS) and gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS) analysis of fatty acid methyl esters (FAMEs) from total fatty acid (TFA), free fatty acid (FFA) and triacylglycerol (TAG) fractions. The results were expressed as the Cumulative Tracer Recovery of the administered dose (CTR%). The quantities and labelling of FAMEs were higher in FFA than in TAG, indicating that label loss was not due to a lack of digestive lipase activity. The labelling was higher for C16:0 than for C18:1. The CTRs were 7.03 ± 0.77% and 6.87 ± 0.91%, respectively, in TFA and FFA for [1-(13)C] C16:0, while they were 0.60 ± 0.15% and 0.51 ± 0.11% for [1-(13)C] C18:1 (mean ± sem). By studying the kinetics of lipid excretion from subjects, two groups emerged. The first one showed rapid excretion in stool #1, whereas the second showed slower excretion in stools #2-#3. A significant difference was found in the FFA in stool #1 for C16:0 (p < 0.01) and C18:1 (p < 0.05). Individual excretion kinetics showed marked variability. Nevertheless, the CTR over the 3-day study period was substantial and homogenous for all subjects. These results confirm that the assessment of faecal elimination is of great importance when establishing total lipid distribution during the postprandial period and validate the analysis of cumulative tracer loss during 72 h post-tracer ingestion.     

Fast screening of highly glycosylated plant sphingolipids by tandem mass spectrometry

The structural characterization of Glycosyl-Inositol-Phospho-Ceramides (GIPCs), which are the main sphingolipids of plant tissues, is a critical step towards the understanding of their physiological function. After optimization of their extraction, numerous plant GIPCs have been characterized by mass spectrometry. Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) full scan analysis of negative ions provides a quick overview of GIPC distribution. Clear differences were observed for the two plant models studied: six GIPC series bearing from two to seven saccharide units were detected in tobacco BY-2 cell extracts, whereas GIPCs extracted from A. thaliana cell cultures and leaves were less diverse, with a dominance of species containing only two saccharide units. The number of GIPC species was around 50 in A. thaliana and 120 in tobacco BY-2 cells. MALDI-MS/MS spectra gave access to detailed structural information relative to the ceramide moiety, the polar head, as well as the number and types of saccharide units. Once released from GIPCs, fatty acid chains and long-chain bases were analyzed by GC/MS to verify that all GIPC series were taken into account by the MALDI-MS/MS approach. ESI-MS/MS provided complementary information for the identification of isobaric species and fatty acid chains. Such a methodology, mostly relying on MALDI-MS/MS, should open new avenues to determine structure-function relationships between glycosphingolipids and membrane organization.