Analysis of petroleum fractions by on-line micro HPLC-HRGC coupling,involving increased efficiency in using retention gaps by partially concurrent solvent evaporation

Two-dimensional chromatography of gasoline by on-line coupled HPLC-HRGC, as described in this paper, allows separate GC analysis of paraffins and aromatics. The GC system contains a retention gap of only 10 m length for introducing HPLC fractions of 100 μl volume. This becomes possible through evaporation of part of the solvent during introduction of the HPLC eluent. This “partially concurrent solvent evaporation” technique allows transfer of large volumes of HPLC eluent into relatively short retention gaps, maintaining the full efficiency of the solvent effects in reconcentrating the bands of the early eluted solutes.     

Capillary zone electrophoresis of alpha-helical diastereomeric peptide pairs with anionic ion-pairing reagents

The present study uses an unique capillary electrophoresis (CE) approach, that we have termed ion-interaction capillary zone electrophoresis (II-CZE), for the separation of diastereomeric peptide pairs where a single site in the centre of the non-polar face of an 18-residue amphipathic alpha-helical peptide is substituted by the 19 L- or D-amino acids. Through the addition of perfluorinated acids at very high concentrations (up to 400 mM), such concentration levels not having been used previously in chromatography or CE, to the background electrolyte (pH 2.0), we have been able to achieve baseline resolution of all 19 diastereomeric peptide pairs with an uncoated capillary. Since each diastereomeric peptide pair has the same sequence, identical mass-to-charge ratio and identical intrinsic hydrophobicity, such a separation by CZE has previously been considered theoretically impossible. Excellent resolution was achieved due to maximum advantage being taken of even subtle disruption of peptide structure/conformation (due to the presence of D-amino acids) of the non-polar face of the amphipathic alpha-helix and its interaction with the hydrophobic anionic ion-pairing reagents. In addition, due to the excellent resolution of diastereomeric peptide pairs by this novel CZE approach, we have also been able to separate a mixture of these closely-related alpha-helical peptides.     

Reactions of hydridosilacyclobutanes with low-valent complexes of iron or platinum

Unstable transition metal compounds formed from hydridosilacyclobutanes are described: 1-methyl-1-silacyclobutane reacts with nonacarbonyldiiron to give the complexes [Fe(CO)₄(H){$\text{Si(Me)CH}{}_2\text{CH}{}_2\text{C}$H₂}] and [$\text{Fe{CH}{}_2\text{CH}{}_2\text{CH}{}_2\text{Si}$(H)Me}(CO)₄], and with bis(triphenylphosphine)(ethylene)platinum(0) to give [Pt(H)(PPh₃)₂{$\text{Si(Me)CH}{}_2\text{CH}{}_2\text{C}$H₂}].     

Capillary electrophoresis of cationic random coil peptide standards: effect of anionic ion-pairing reagents and comparison with reversed-phase chromatography

The present study compares a charge/hydrophobicity capillary electrophoresis (CE) approach to reversed-phase high-performance liquid chromatography (RP-HPLC) for the separation of three series of four synthetic, random coil peptide standards. Each series has peptides of the same positive charge (+1, +2 and +3 series) and length but differing in hydrophobicity. Complete resolution of the 12 peptides was achieved via a novel CE approach: a capillary zone electrophoresis (CZE) mode effected a separation of identically charged peptides; within each charged group of peptides, the addition of perfluorinated acid anionic ion-pairing reagents allowed resolution of the peptides through a mechanism based on peptide hydrophobicity which we have termed ioninteraction (II)-CZE. The peak capacity and peptide resolution of this CE approach was superior to that of RP-HPLC and stresses an important role for CE for peptide/proteomic applications.     

Proteomic analysis of the endoplasmic reticulum from developing and germinating seed of castor (Ricinus communis)

Endoplasmic reticulum (ER) has been prepared and analysed from germinating and developing castor bean endosperm. A combination of one- and two-dimensional (1-D and 2-D) gel electrophoresis was used to study the complexity of sample and protein differences between the two stages. The ER of the developing oilseed is central to the synthesis, sorting and storage of protein and lipid reserves while the germinating seed is concerned with their degradation. Sample complexity has been reduced by separation of ER proteins into lumenal, peripheral membrane and integral membrane subfractions. Membrane proteins pose specific problems in aggregation and binding to passive surfaces. We have overcome this by collection of membranes at density gradient interfaces and by silanization of plastic ware. Several major components have been identified from 1-D gels by N-terminal sequencing and matrix-assisted laser desorption/ionization (MALDI) peptide mass fingerprints. These include protein disulphide isomerase (PDI), calreticulin and developing-ER-specific oleate-12-hydroxylase involved in the biosynthesis of ricinoleic acid. In excess of 300 spots are detectable in each developmental fraction by high sensitivity 2-D gels. This is the first 2-D electrophoretic analysis of plant ER. These gels reveal significant differences between germinating and developing ER. Preparative loading 2-D gels of germinating ER have been run and 14 selected spots characterized by quadrupole time of flight tandem mass spectrometry (Q-TOF MS/MS). Ten of these proteins were assigned function on the basis of identity with existing castor database entries, or by homology with other species. Two proteins, aspartate proteinase precursor and N-carbamyl-L-aminohydrolase-like protein, appear to be absent from developing profiles. Most of the proteins identified are concerned with roles in protein processing and storage, and lipid metabolism which occur in the ER. Data from three of the assigned spots included unidentified peptides indicating the presence of more than one protein in these spots following 2-D electrophoresis. More extensive analysis will have to await developments in genomics but the basic separation technologies to simplify sample identity for a plant ER preparation have been established.     

Ab initio calculations and vibrational energy level fits for the lower singlet potential-energy surfaces of C3

Ab initio multireference configuration interaction potential energy surfaces are computed for the eight lowest singlet surfaces of C(3). These reveal several important features, including several conical intersections in linear, nonlinear, and equilateral triangle geometries. These intersections are important because, particularly for the excited A (1)Pi(u) state, reasonable ab initio results could only be obtained by including nearby, near degenerate, (1)Sigma(u) (-) and (1)Delta(u) states that cross the A (1)Pi(u) state around 4500 cm(-1) above the equilibrium geometry, and a (1)Pi(g) state whose potential in turn crosses the other states about 2000 cm(-1) further up. These states are probably responsible for the complexity of the shorter wavelength UV absorption spectrum of C(3). The computed potential energy surface for the ground, X (1)Sigma(g) (+), state and for the lowest two excited singlet surfaces (which both correlate with the A (1)Pi(u) state in a collinear geometry) are fitted to analytic functional forms. Vibrational energy levels are calculated for both states, taking account of the Renner-Teller coupling in the excited A (1)Pi(u) state. The potential parameters for both states are then least-squares fitted to experimental data. The ground-state fit covers a range of approximately 8500 cm(-1) above the lowest level, and reproduces 100 observed vibrational levels with an average error of 2.8 cm(-1). The A (1)Pi(u) state surfaces cover a range of 3250 cm(-1) above the zero-point level, and reproduce the 44 observed levels in this range with an average error of 2.8 cm(-1).     

SPECTROSCOPIC STUDIES OF CUTANEOUS PHOTOSENSITIZING AGENTS–XII. SPIN TRAPPING STUDY OF THE FREE RADICALS GENERATED DURING THE PHOTOLYSIS OF PHOTO ALLERGENS BITHIONOL and FENTICHLOR

Free radicals were trapped and observed by ESR when photoallergens bithionol and fentichlor were irradiated in the presence of spin traps N- t -butyl-α-phenylnitrone (PBN) and 5,5-dimethyl-pyrroline-N-oxide (DMPO). In the absence of air, both PBN and DMPO trapped a carbon-centered radical. The carbon-centered radical, which was capable of abstracting a hydrogen atom from cysteine, glutathione, ethanol and formate, was identified as an aryl radical derived from the homolytic cleavage of the carbon-chlorine bond. In the presence of air, both carbon-centered radicals and hydroxyl radicals were trapped by DMPO. Under similar conditions, the yield of the hydroxyl radicals was greater from bithionol than from fentichlor. The presence of the hydroxyl radical was confirmed by kinetic experiments employing hydroxyl radical scavengers (ethanol, formate). Superoxide and H₂O₂ were not involved. Experiments with oxygen-¹⁷O indicated that the hydroxyl radicals came exclusively from dissolved oxygen. The precursor of the hydroxyl radical is postulated to be a peroxy intermediate (ArOO*) derived from the reaction of an aryl radical (Ar*) with molecular oxygen. Both bithionol and fentichlor photoionized only when excited in the UVC (<270 nm) region. Free radicals have long been postulated in the photodechlorination of bithionol and fentichlor and the present study provides supporting evidence for such a mechanism. Aryl and hydroxyl radicals are reactive chemical species which may trigger a series of events that culminate in photoallergy.     

Development and evaluation of a nano-electrospray ionisation source for atmospheric pressure ion mobility spectrometry

A nano-electrospray ionisation source has been designed and constructed for a high temperature ion mobility spectrometer. The drift cell was modified by replacement of the 63Ni atmospheric pressure chemical ionisation source with a tube lens/desolvation region and operated using commercial nano-electrospray capillaries. Ions were introduced into the drift region via a Bradbury-Nielson gate (pulse width 50 micros, repetition period 20 ms). A unidirectional flow of nitrogen was used as the drift gas at temperatures in the range 100-150 degrees C to aid desolvation. The performance of the nano-electrospray ion source has been demonstrated for analytes including crown ethers, amino acids and peptides. Reduced mobilities determined by nano-ESI were consistent with those reported using a 63Ni ion source.     

Action of tert-butyl azidoformate on the conjugate bases of 1,2,3,4-tetrahydro-9H-carbazole and other indole derivatives

tert-Butyl azidoformate ($\text{2}$) reacts with the conjugate bases of $\text{3a}$, $\text{7a}$, $\text{9}$ (R¹ = R² = CH₃), and $\text{9}$ (R¹ = CH₃, R² = H) to give products [$\text{4}$, $\text{8}$, $\text{12}$, and $\text{14}$, respectively] in addition to the expected N-(tert-butoxycarbonyl)indole derivatives.     

Electropolymerization of aminophthalic acids. I. Polymerization of 4-aminophthalic acid

4-Aminophthalic acid has been polymerized in almost quantitative yield to low molecular weight polymer by electrochemical initiation at a platinum anode. Systems involving the acid, amine salt, and the ammonium salt have been explored; the acid and/or the amine salt of the acid provides the best means of obtaining polymer. Maximum molecular weight is attained in a very short time at low current densities (～2 hr at 50 mA). Thermogravimetric data indicate a temperature stability comparable to polyamide-imide polymers (400°C). Long reaction times and high current densities decrease molecular weight and polymer yield.