Synthesis of the branched-chain sugar aceric acid: a unique component of the pectic polysaccharide rhamnogalacturonan-II

Described herein is the synthesis of 3-C-carboxy-5-deoxy-L-xylose (aceric acid), a rare branched-chain sugar found in the complex pectic polysaccharide rhamnogalacturonan-II. The key synthetic step in the construction of aceric acid was the stereoselective addition of 2-trimethylsilyl thiazole to 5-deoxy-1,2-O-isopropylidene-alpha-L-erythro-pentofuran-3-ulose (2), which was prepared from L-xylose. The thiazole group was efficiently converted into the required carboxyl group via conventional transformations. Aceric acid was also synthesized by dihydroxylation of a 3-C-methylene derivative of 2 followed by oxidation of the resulting hydroxylmethyl group. The C-2 epimer of aceric acid was also synthesized using thiazole addition chemistry, starting from L-arabinose.     

1,3-Migration of a phenyl group in the conversion of (Me3Si)2(PhMe2Si)CSiMePhX into (Me3Si)2(Ph2MeSi)CSiMe2Y species

The finding that compounds of the type (Me₃Si)₂(PhMe₂Si)CSiMePhX react with electrophiles to give very predominantly rearranged products (Me₃Si)₂(Ph₂MeSi)CSiMe₂Y, which would be expected to be thermodynamically disfavoured, can be rationalized in terms of a mechanism in which the anchimerically-assisted departure of X⁻ gives the Ph-bridged cation [(Me₃Si)₂

Full-size image

MePh]⁺ which is attacked by the nucleophile at the less hindered centre bearing two Me groups rather than that bearing one Me and one Ph group, with the outcome determined by kinetic rather than thermodynamic factors. Both (Me₃Si)₂(Ph₂MeSi)CSiMe₂Br and its isomer (Me₃Si)₂(PhMe₂Si)CSiMePhBr react with AgBF₄ in CH₂Cl₂ or Et₂O to give >95% of the fluoride (Me₃Si)₂(Ph₂MeSi)CSiMe₂F. Reaction of the bromide (Me₃Si)₂(PhMe₂Si)CSiMePhBr with AgO₂CCF₃ in Et₂O, and that of the hydride (Me₃Si)₂(PhMe₂Si)CSiMePhH with ICl in CCl₄, likewise give >95% of the rearranged (Me₃Si)₂(Ph₂MeSi)CSiMe₂O₂CCF₃ and (Me₃Si)₂(Ph₂MeSi)CSiMe₂Cl, respectively.     

Bis(fluoroalkyl)acrylic and methacrylic phosphate monomers, their polymers and some of their properties

Ten fluoromonomers of structure (R_FO)₂P(O)OCH₂CH₂OC(O)CRCH₂ were made in 30-64% yield by treating the chloridates (R_FO)₂P(O)Cl with HOCH₂CH₂OC(O)CRCH₂ in chloroform in the presence of triethylamine [R_F=CF₃CH₂, C₂F₅CH₂, C₃F₇CH₂, C₄F₉CH₂, C₄F₉CH₂CH₂ or C₆F₁₃CH₂CH₂; R  H or Me]. The chloromonomer (CCl₃CH₂O)₂P(O)OCH₂CH₂OC(O)CHCH₂ was obtained analogously in 29% yield. Polymerisation of the acrylate monomers, but not the methacrylate monomers, could be effected using α-azoisobutyronitrile as a radical initiator. Acrylic polymers having CF₃CH₂O, CCl₃CH₂O and C₆F₁₃CH₂CH₂O side-chains were obtained as translucent rubbers. Specimens of cotton fabric were treated with solutions of the polymers, and average water and oil repellency ratings measured. Fabric coated with the polymer with the C₆F₁₃CH₂CH₂O side-chain afforded protection from penetration of the test liquids. Treated fabrics were subjected to the limiting oxygen index (LOI) test according to BS EN ISO 4589-2 (1999): this test determines the point at which a material just burns in a volumetric flow of oxygen and nitrogen. The treated fabrics were more fire-resistant (LOI 22-29%) than the untreated fabric (LOI 18%). Fabric coated with the CCl₃CH₂O-based polymer can be considered fire-retardant (LOI 29%). The fluoromonomers were tested for anti-acetylcholinesterase activity and were found to be poor enzyme inhibitors; they are predicted to possess low acute toxicity.     

Préparation d'aryloxyméthyl-1 triazoles-1,2,3

The preparation of 1-aryloxymethyl-1,2,3-triazoles, potential biologically active compounds particularly in the pesticide field, is described. The action of sodium azide on aryloxymethyl halides gave aryloxymethyl azides. The cycloaddition reactions of azides with acetylenic compounds provided the expected triazoles in good yields.     

SPECTROSCOPIC STUDIES OF CUTANEOUS PHOTOSENSITIZING AGENTS—IV. THE PHOTOLYSIS OF BENOXAPROFEN, AN ANTI-INFLAMMATORY DRUG WITH PHOTOTOXIC PROPERTIES

Abstract— Benoxaprofen [2-(4-chlorophenyl)-α-methyl-5-benzoxazole acetic acid] is an anti-inflammatory drug that causes acute phototoxicity in many patients. Photolysis studies in organic solvents (ethanol, benzene, dimethylsulfoxide) showed that benoxaprofen underwent both Type I and Type II reactions. Irradiation of an anerobic solution of benoxaprofen in ethanol resulted in hydrogen abstraction from the solvent to yield hydroxyethyl and ethoxyl radicals. In the presence of oxygen, superoxide, singlet oxygen and hydroxyethyl radicals were detected. Photolysis of benoxaprofen in air-saturated benzene or dimethylsulfoxide gave superoxide. However, under anerobic conditions the drug yielded a carbon-centered radical in benzene that could not be identified. These findings suggest that both oxygen-dependent and oxygen-independent processes may be important in the phototoxic reactions of benoxaprofen.     

Analysis of petroleum fractions by on-line micro HPLC-HRGC coupling,involving increased efficiency in using retention gaps by partially concurrent solvent evaporation

Two-dimensional chromatography of gasoline by on-line coupled HPLC-HRGC, as described in this paper, allows separate GC analysis of paraffins and aromatics. The GC system contains a retention gap of only 10 m length for introducing HPLC fractions of 100 μl volume. This becomes possible through evaporation of part of the solvent during introduction of the HPLC eluent. This “partially concurrent solvent evaporation” technique allows transfer of large volumes of HPLC eluent into relatively short retention gaps, maintaining the full efficiency of the solvent effects in reconcentrating the bands of the early eluted solutes.     

Capillary zone electrophoresis of alpha-helical diastereomeric peptide pairs with anionic ion-pairing reagents

The present study uses an unique capillary electrophoresis (CE) approach, that we have termed ion-interaction capillary zone electrophoresis (II-CZE), for the separation of diastereomeric peptide pairs where a single site in the centre of the non-polar face of an 18-residue amphipathic alpha-helical peptide is substituted by the 19 L- or D-amino acids. Through the addition of perfluorinated acids at very high concentrations (up to 400 mM), such concentration levels not having been used previously in chromatography or CE, to the background electrolyte (pH 2.0), we have been able to achieve baseline resolution of all 19 diastereomeric peptide pairs with an uncoated capillary. Since each diastereomeric peptide pair has the same sequence, identical mass-to-charge ratio and identical intrinsic hydrophobicity, such a separation by CZE has previously been considered theoretically impossible. Excellent resolution was achieved due to maximum advantage being taken of even subtle disruption of peptide structure/conformation (due to the presence of D-amino acids) of the non-polar face of the amphipathic alpha-helix and its interaction with the hydrophobic anionic ion-pairing reagents. In addition, due to the excellent resolution of diastereomeric peptide pairs by this novel CZE approach, we have also been able to separate a mixture of these closely-related alpha-helical peptides.     

Reactions of hydridosilacyclobutanes with low-valent complexes of iron or platinum

Unstable transition metal compounds formed from hydridosilacyclobutanes are described: 1-methyl-1-silacyclobutane reacts with nonacarbonyldiiron to give the complexes [Fe(CO)₄(H){$\text{Si(Me)CH}{}_2\text{CH}{}_2\text{C}$H₂}] and [$\text{Fe{CH}{}_2\text{CH}{}_2\text{CH}{}_2\text{Si}$(H)Me}(CO)₄], and with bis(triphenylphosphine)(ethylene)platinum(0) to give [Pt(H)(PPh₃)₂{$\text{Si(Me)CH}{}_2\text{CH}{}_2\text{C}$H₂}].     

Capillary electrophoresis of cationic random coil peptide standards: effect of anionic ion-pairing reagents and comparison with reversed-phase chromatography

The present study compares a charge/hydrophobicity capillary electrophoresis (CE) approach to reversed-phase high-performance liquid chromatography (RP-HPLC) for the separation of three series of four synthetic, random coil peptide standards. Each series has peptides of the same positive charge (+1, +2 and +3 series) and length but differing in hydrophobicity. Complete resolution of the 12 peptides was achieved via a novel CE approach: a capillary zone electrophoresis (CZE) mode effected a separation of identically charged peptides; within each charged group of peptides, the addition of perfluorinated acid anionic ion-pairing reagents allowed resolution of the peptides through a mechanism based on peptide hydrophobicity which we have termed ioninteraction (II)-CZE. The peak capacity and peptide resolution of this CE approach was superior to that of RP-HPLC and stresses an important role for CE for peptide/proteomic applications.