Arsinothioyl-sugars produced by in vitro incubation of seaweed extract with liver cytosol analysed by HPLC coupled simultaneously to ES-MS and ICP-MS

It has been shown, that in vitro incubation of Laminaria digitata extract (containing mainly As-sugar 1 (glycerol-arsenoribose) and As-sugar 3 (sulfonate-arsenoribose)) with liver cytosol, produced the same two arsenicals, as when L. digitata extract was treated with H(2)S. By parallel use of HPLC-ICP-MS and HPLC-ES-MS the compounds displayed mainly m/z 345 and m/z 409. A pure As-sugar 1 standard was obtained, and a standard of arsinothioyl-sugar 1 (m/z 345) was produced, by purging a solution of As-sugar 1 with gaseous H(2)S. The identity of arsinothioyl-sugar 1 was characterised by ES-MS, 1D and 2D NMR. Arsinothioyl-sugar 1 showed the same chromatographic behaviour and MS characteristics as one of the two arsenic-containing compounds (m/z 345) produced by incubation of L. digitata extracts with liver cytosol, and as the product of the incubation of As-sugar 1 with liver cytosol (HPLC-ICP-MS, HPLC-ES-MS). Assuming that As-sugar 3 reacts in a similar way to As-sugar 1 with H(2)S, it is most likely that the second unknown (m/z 409) is arsinothioyl-sugar 3. The degradation of As-sugar 1 in acidic solution (100 mM HCl) was followed by (1)H-NMR, and the relative slow degradation (t(1/2)= 17 h) suggests that arsenosugars are taken up from the stomach in their original chemical form, hence the study of arsenosugar incubation in tissue is highly relevant. The arsinothioyls are a new group of organoarsenicals, which have only recently been identified in nature. Here, arsinothioyl sugars are detected for the first time. The in vitro formation of arsinothioyl-sugars in liver cytosol suggests that arsinothioyls may be of large biochemical and toxicological importance.     

Flow injection analysis : Part IX. A New Approach to Continuous Flow Titrations

Studies of dispersion patterns in nonsegmented streams, flowing through narrow open tubes, show that it is possible to obtain highly reproducible concentration gradients within a sample zone injected into the moving stream. By varying the geometry of the flow path, low, medium and high dispersion patterns can be achieved; the high dispersion pattern forms the basis for a new approach to continuous flow titrimetry. In this type of titration, discrete samples are passed through a gradient device and are then mixed with a continuously flowing stream of titrant of fixed concentration. The new technique has been tested for potentiometric as well as spectrophotometric end-point indication. A simple one-channel system allows titrations to be performed automatically in less than 1 min.     

Fast resonance raman spectroscopy of short-lived radicals

We report the first application of pulsed resonance Raman spectroscopy to the study of short-lived free radicals produced by pulse radiolysis. A single pulse from a flash-lamp pumped tunable dye laser is used to excite the resonance Raman spectrum of the p-terphenyl anion radical with an initial concentration of 4 × 10^?5 moles per liter and a half life of 2 μs. The spectrum is recorded by an optical multichannel system consisting of an image intensifier coupled to a TV-camera.     

Identification of novel macrocyclic peptidase substrates via on-bead enzymatic cyclization

Peptidase-catalyzed formation of macrocyclic lactams on solid phase identifies ring systems that are favorably bound in the enzyme active site. We evaluated several cyclic peptide motifs linked by ester bonds between the P2 and P1' or the P1 and P2' side chains. The depsipeptide represented by structure 5 was readily generated by a variety of peptidases from precursor omega-amino acids or omega-amino esters. This strategy for identifying ring systems for potential macrocyclic transition state analogues was demonstrated with the serine peptidases trypsin and chymotrypsin, with the aspartic peptidase pepsin, and with the zinc peptidase thermolysin.     

Self consistent field molecular orbital calculation for pyrrole

The electronic structure and spectrum of pyrrole have been studied using the semiempirical LCAO SCF MO method. With configuration interaction included, low excited singlet states are calculated to occur at 5.98 ev, 6,74 ev, 7,33 ev, and 8,20 ev, in good agreement with the experimental values of about 5.88 ev, 6.77 ev, and 7,21 ev. The dipole moment of the molecule is calculated to 1.84 D, to be compared with the experimental value 1.80 D. Tables of coreattraction integrals for combinations of carbon and nitrogen atoms are presented.

---

Zusammenfassung Elektronenstruktur und -spektrum des Pyrrols wurden nach, der halbempirischen LCAO SCF MO-Methode untersucht. Unter Einschluß der Konfigurationenwechselwirkung wurden niedrigliegende angeregte Singulettniveaus bei 5,98, 6,74, 7,33 und 8,20 eV (über dem Grundzustand) errechnet, in guter Übereinstimmung mit den experimentellen Werten von etwa 5,88, 6,77 und 7,21 eV. Das Dipolmoment des Moleküls ergibt sich zu 1,84 D, bei einem experimentellen Wert von 1,80 D.Tabellen von (sphärischen) Rumpf-Elektron-Integralen für alle vier Kombinationen von C und N werden angegeben.

---

Résumé La structure et le spectre électroniques du pyrrole ont été étudiés à l'aide de la méthode sémiempirique LCAO SCF MO. L'interaction de configurations inclue, le calcul donne des états excités à 5,98, 6,74, 7,33 et 8,20 eV (au-dessus de l'état fondamental), en bon accord avec les valeurs expérimentales de 5,88, 6,77 et 7,21 eV. Le moment dipolaire calculé de la molécule est 1,84 D, l'expérience donnant 1,80 D. Des tables d'intégrales d'attraction entre un coeur sphérique et un électron d'un autre atome sont données pour les quatre combinaisons d'atomes C et N.

     

Zur Analyse des Flu?spats

Zusammenfassung Die Analyse hochprozentigen Flußspats wird in ihrer derzeitigen Ausführungsform beschrieben. Nach Beseitigung carbonatischer Begleiter durch eine Behandlung mit verd. Essigsäure wird die Kieselsäure entweder mit Flußsäure verflüchtigt und aus dem Gewichtsverlust bestimmt oder in einer gesonderten, mit Soda aufgeschlossenen Probe als Tetrapyridiniumdodecamolybdatosilicat gefällt und als SiO₂ + 12 MoO₃ ausgewogen. Der Bariumsulfatgehalt wird nach Verflüchtigung der Kieselsäure durch Abrauchen des verbleibenden Rückstandes mit Schwefelsäure und anschließendes Kochen mit verd. Salzsäure/Schwefelsäure in der üblichen Art ermittelt. Im Filtrat der Bariumsulfatfällung wird Calcium nach Abtrennung oder Maskierung der dreiwertigen Begleiter als Oxalat gefällt und zum Oxid verglüht oder direkt durch eine photometrische Titration mit ÄDTA bestimmt. Der kleine Sulfidschwefelgehalt in Flußspat wird durch Säure als Schwefelwasserstoff ausgetrieben, als Cadmiumsulfid gebunden und anschließend jodometrisch bestimmt.Für Kieselsäure, Bariumsulfat und Calciumfluorid ergibt die Fehlerrechnung Standardabweichungen von ^s SiO₂=0.04%; sBaSO₄=±0,04%; sCaF₂=±0,09%.

---

Summary The present form of the analysis of high-percentage fluorspar is described. After removal of accompanying carbonates by treatment with dilute acetic acid, the silica is either volatilized with hydrofluoric acid and determined from the loss of weight or precipitated in a separate sample, decomposed with sodium carbonate, as tetrapyridinium dodecamolybdatosilicate and weighed as SiO₂ + 12 MoO₃. After volatilization of silica the remaining residue is fumed with sulphuric acid, boiled with a dilute hydrochloric/sulphuric acid mixture and the barium sulphate determined gravimetrically. In the filtrate of the barium sulphate precipitation the trivalent elements are either separated or masked. Then calcium is precipitated as oxalate and weighed after conversion to the oxide or directly determined by photometric titration with EDTA. After conversion to hydrogensulphide, the small sulphide-sulphur content in fluorspar is bound as cadmium sulphide and determined iodometrically.The error calculation results in the following standard deviations for silica, barium sulphate, and calcium fluoride: ^s SiO₂=0.04%; sBaSO₄=±0,04%; sCaF₂=±0,09%.

     

Development of an automated sequential injection on-line solvent extraction-back extraction procedure as demonstrated for the determination of cadmium with detection by electrothermal atomic absorption spectrometry

An automated sequential injection (SI) on-line solvent extraction-back extraction separation/preconcentration procedure is described. Demonstrated for the assay of cadmium by electrothermal atomic absorption spectrometry (ETAAS), the analyte is initially complexed with ammonium pyrrolidinedithiocarbamate (APDC) in citrate buffer and the chelate is extracted into isobutyl methyl ketone (IBMK), which is separated from the aqueous phase by means of a newly designed dual-conical gravitational phase separator. A metered amount of the organic eluate is aspirated and stored in the PTFE holding coil (HC) of the SI-system. Afterwards, it is dispensed and mixed with an aqueous back extractant of dilute nitric acid containing Hg(II) ions as stripping agent, thereby facilitating a rapid metal-exchange reaction with the APDC ligand and transfer of the Cd into the aqueous phase. The aqueous phase is separated in a second dual-conical gravitational phase separator, and 30 μl of it is entrapped and metered in a sample loop (SL) and subsequently introduced via air segmentation into the graphite tube for analyte quantification. The ETAAS determination is performed in parallel with the separation/preconcentration process of the ensuing sample. An enrichment factor of 21.4, a detection limit of 2.7 ng l⁻¹, along with a sampling frequency of 13 h⁻¹ were obtained at a sample flow rate of 6.0 ml min⁻¹. The precision (R.S.D.) at the 0.4 μg l⁻¹ level was 1.8% as compared to 3.2% when quantifying the organic extractant directly. The applicability of the procedure is demonstrated for the determination of trace levels of cadmium in three certified reference materials.     

Synthesis of <Emphasis Type="Italic">N</Emphasis>-1-(Indanyloxymethyl) and <Emphasis Type="Italic">N</Emphasis>-1-(4-Hydroxybut-2-enyloxymethyl) Analogues of the HIV Drugs Emivirine and GCA-186

Summary. A series of Emivirine and GCA-186 analogues substituted at N-1 with indan-1-yloxymethyl (6a–6c) and indan-2-yloxymethyl (6d–6f) were synthesized by reaction of the corresponding bis(indanyloxy)methans with uracils having 5-ethyl or 5-isopropyl and 6-benzyl or 6-(3,5-dimethylbenzyl) substituents. A route to the corresponding N-1 substituted 4-hydroxybut-2-enyloxymethyl analogue was also devised. All newly synthesized compounds showed potent activity against wild-type HIV-1, the most active compound being 5-ethyl-1-(indan-1-yloxymethyl)-6-(3,5-dimethylbenzyl)uracil (6b), which was 50-fold more active than Emivirine.Present address: Chemistry Department, Faculty of Science, Tanta University, Tanta, EgyptA research center funded by The Danish National Research Foundation for studies on nucleic acid chemical biology     

Zur chelatometrischen Titration von Blei in Gegenwart von St?relementen

Zusammenfassung Es wurde eine Methode ausgearbeitet, die gestattet, Blei neben zahlreichen Störelementen chelatometrisch zu bestimmen. Triäthanolamin diente bei pH 10 (NH₃/NH₄Cl-Puffer) als Hilfskomplexbildner für Pb. Zur Maskierung der jeweiligen Störelemente wurde Triäthanolamin, Tartrat oder KCN benutzt.Durch Verwendung von 4-(2-Pyridylazo)-resorcin (PAR) als Indicator konnte die Endpunktserkennung gegenüber dem bisher unter ähnlichen Bedingungen benutzten Eriochromschwarz T wesentlich verbessert werden.Blei ist auf diese Weise neben folgenden Elementen mit hoher Genauigkeit zu titrieren: Cu^II, Ni, Zn, Cd, Al, Fe^III, Sn^IV, Sb^III, Bi^III.Alle Titrationen wurden photometrisch durchgeführt. Die relativen Standardabweichungen der einzelnen binären Systeme liegen bei 0,1%.Die meisten Bestimmungen sind auch visuell auszuführen. Der Indicator schlägt von Carminrot nach Reingelb um. Lediglich in Gegenwart von Fe^IIIoder Bi versagt die visuelle Endpunktserkennung, da die Lösung eine Eigenfärbung zeigt bzw. Farbreaktionen mit dem Indicator erfolgen, die den Farbwechsel im Endpunkt verdecken.

---

Summary A method is described by which lead can be determined in presence of numerous interfering cations by a chelatometric titration. Triethanolamine is used as an auxiliary complexing agent for lead in an ammoniaammonium chloride buffer at pH 10.Interfering cations may be masked with triethanolamine, tartrate or potassium cyanide. Thus, it is possible to determine lead with high precision in presence of Cu^II, Ni, Zn, Cd, Al, Fe^III, Sn^IV, Sb^III, Bi^III. Substituting Eriochrome Black T by PAR as indicator greatly improves the endpoint in photometric and visual titrations, the latter becoming impossible only in presence of Fe^III and Bi^III, which deteriorate the change of colour at the end point.

     

Magnetic structure of the europium fulleride ferromagnet Eu(6)C(60)

The powder neutron diffraction technique has been used for the direct observation of magnetic scattering below a Curie temperature of approximately 14 K in the fullerene-based molecular ferromagnet Eu6C60. Europium is in the divalent state with a magnetic moment of 7.1(3) muB per atom, and the configurational symmetry of the magnetic structure is body-centered cubic. Close contacts between Eu2+ and neighboring C60 units provide the signature of orbital hybridization, which can evidently account for the conducting and magnetic properties of the material.