Emission of gases and degradation volatiles from polymeric wood constituents in friction welding of wood dowels

Analysis of volatile compounds and gases emitted as smoke at the welding interface during rotational wood dowel welding of a hardwood (beech) and of a softwood (Norway spruce) has shown that the compounds in such a smoke are water vapour, CO₂, degradation compounds from wood polymeric carbohydrates and from amorphous lignin, as well as some volatile terpenes, these latter only for the softwood used, Norway spruce. The main carbohydrates contributing to the volatile compounds are xylans for beech and glucomannans for spruce. Numerous compounds, in very small proportions derived from the degradation and rearrangement reactions of lignin, have also been identified. The proportion of CO₂ emitted is very low, and neither CO nor methane is emitted due to the relatively low temperature of dowel welding. Experiments at temperature slightly higher than that of dowel welding but prolonged in time have shown that the main component of the smoke produced during welding appears to be water vapour.     

Chemoenzymatic preparation of nucleosides from furanoses

Chemoenzymatic preparation of ribose, deoxyribose and arabinose 5-phosphates was accomplished. These compounds were tested as starting materials in the enzymatic preparation of natural and modified purine and pyrimidine nucleosides, using an overexpressed Escherichia coli phosphopentomutase.     

Hydrogen permeability of 2.5 μm palladium–silver membranes deposited on ceramic supports

The permeability of hydrogen selective Pd-based membranes was tested in different experimental conditions. The membranes were obtained by depositing palladium–silver films onto ceramic porous supports, with film composition of about 20 wt% of silver and thicknesses of about 2.5 μm. Their permeance was measured at 400 °C at total trans-membrane pressures between 0.2 and 6 bar, using pure feeds of H₂ and N₂, as well as H₂/N₂ and H₂/CO mixtures; the temperature dependence of permeability was investigated using pure H₂ feeds at 300, 400 and 500 °C. The membranes exhibit a very attractive behavior, maintaining a virtually infinite selectivity throughout the testing, with permeance values among the highest values reported in literature for similar membranes. Permeation of pure hydrogen accurately follows Sieverts’ law and confirms the presence of a chemisorption–dissociation–diffusion mechanism, characterised by the transport of atomic hydrogen through the Pd–Ag layer as the limiting step. In the case of H₂/N₂ mixtures, the high membrane permeance originates also significant concentration polarization phenomena resulting in apparent deviations from Sieverts’ behavior; the presence of CO in the feed may reduce hydrogen permeability even by 75%, although this effect is shown to be fully reversible after a subsequent air treatment at 400 °C. The temperature dependence of the membrane permeability is of Arrhenius type, with an activation energy of about 17 kJ/mol, that is, close to what is reported for Pd–Ag membranes following Sieverts’ behavior.     

Site-specific interactions of Cu(II) with alpha and beta-synuclein: bridging the molecular gap between metal binding and aggregation

The aggregation of alpha-synuclein (AS) is a critical step in the etiology of Parkinson's disease (PD) and other neurodegenerative synucleinopathies. Protein-metal interactions play a critical role in AS aggregation and might represent the link between the pathological processes of protein aggregation and oxidative damage. Our previous studies established a hierarchy in AS-metal ion interactions, where Cu(II) binds specifically to the protein and triggers its aggregation under conditions that might be relevant for the development of PD. In this work, we have addressed unresolved structural details related to the binding specificity of Cu(II) through the design of site-directed and domain-truncated mutants of AS and by the characterization of the metal-binding features of its natural homologue beta-synuclein (BS). The structural properties of the Cu(II) complexes were determined by the combined application of nuclear magnetic resonance, electron paramagnetic resonance, UV-vis, circular dichroism spectroscopy, and matrix-assisted laser desorption ionization mass spectrometry (MALDI MS). Two independent, noninteracting copper-binding sites with significantly different affinities for the metal ion were detected in the N-terminal regions of AS and BS. MALDI MS provided unique evidence for the direct involvement of Met1 as the primary anchoring residue for Cu(II) in both proteins. Comparative spectroscopic analysis of the two proteins allowed us to deconvolute the Cu(II) binding modes and unequivocally assign the higher-affinity site to the N-terminal amino group of Met1 and the lower-affinity site to the imidazol ring of the sole His residue. Through the use of competitive chelators, the affinity of the first equivalent of bound Cu(II) was accurately determined to be in the submicromolar range for both AS and BS. Our results prove that Cu(II) binding in the C-terminal region of synucleins represents a nonspecific, very low affinity process. These new insights into the bioinorganic chemistry of PD are central to an understanding of the role of Cu(II) in the fibrillization process of AS and have implications for the molecular mechanism by which BS might inhibit AS amyloid assembly.     

Induced-fit in the gas phase: conformational effects on the enantioselectivity of chiral tetra-amide macrocycles

The structure, stability, and reactivity of proton-bound diastereomeric [M x H x A]+ complexes between some amino acid derivatives (A) and several chiral tetra-amide macrocycles (M) have been investigated in the gas phase by ESI-FT-ICR and ESI-ITMS-CID mass spectrometry. The displacement of the A guest from the diastereomeric [M x H x A]+ complexes by reaction with the 2-aminobutane enantiomers (B) exhibits a distinct enantioselectivity with regards to the leaving amino acid A and, to a minor extent, to the amine reactant B. The emerging selectivity picture, discussed in the light of molecular mechanics calculations, provides compelling evidence that the most stable conformers of the selected chiral tetra-amide macrocycles M may acquire in the gas phase a different conformation by induced fit on complexation with some representative amino acid derivatives A. This leads to the coexistence in the gas phase of stable diastereomeric [M x H x A]+ eq-eq and ax-ax structures, in proportions depending on the configuration of A and M and characterized by different stability and reactivity toward the 2-aminobutane enantiomers. The enantioselectivity of the gas-phase A-to-B displacement in the diastereomeric [M x H x A]+ complexes essentially reflects the free energy gap between the homo- and heterochiral [M x H x A]+ complexes, except when the tetra-amidic host presents an additional macrocycle generated by a decamethylene chain. In this case, the measured enantioselectivity mostly reflects the stability difference between the relevant diastereomeric transition structures.     

Synthesis and characterisation of helical beta-peptide architectures that contain (S)-beta3-HDOPA(Crown Ether) derivatives

A new set of beta-amino acids that carry various crown ether receptors on their side chains of the general formula (S)-beta(3)-HDOPA(crown ether) (HDOPA: homo-3,4-dihydroxyphenylalanine; (crown ether): [15]crown-5 ([15-C-5]), [18]crown-6 ([18-C-6]), [21]crown-7 ([21-C-7]), 1,2-Benzo-[24]crown-8 ([Benzo-24-C-8]) and (R)-Binol-[20]crown-6 ([(R)-Binol-20-C-6])) was prepared. Peptides that are based on these new crowned beta-amino acids combined with (1S,2S)-ACHC (2-aminocyclohexanecarboxylic acid), which is known to be a potent 3(14)-helix inducer, to the hexamer level, with two crowned residues at the i and i+3 positions of the main-chain, were synthesized in solution by stepwise coupling using Boc-N(alpha)-protection (Boc: tert-butoxycarbonyl) and the EDC/HOAt C-activation method. Their conformational analysis was performed by using FTIR absorption, NMR and CD spectroscopy techniques. Our results are in full agreement with a 3(14)-helix conformation.     

Putative palytoxin and its new analogue,ovatoxin-a,in <Emphasis Type="Italic">Ostreopsis ovata</Emphasis> collected along the ligurian coasts during the 2006 toxic outbreak

In this article we report on the liquid chromatography tandem mass spectrometry (LC-MS) investigation of plankton samples collected in the summer of 2006 along the Ligurian coasts, coinciding with a massive bloom of the tropical microalga Ostreopsis ovata. LC-MS analyses indicated the occurrence of putative palytoxin along with a much more abundant palytoxin-like compound never reported so far, which we named ovatoxin-a. On the basis of molecular formula, fragmentation pattern, and chromatographic behavior, the structure of ovatoxin-a appeared to be strictly related to that of palytoxin. We report also on the analysis of cultured O. ovata, which was necessary to unequivocally demonstrate that putative palytoxin and ovatoxin-a contained in field samples were actually produced by O. ovata itself.     

Photoinduced energy and electron-transfer processes in porphyrin-perylene bisimide symmetric triads

The photophysics of two symmetric triads, (ZnP)2PBI and (H2P)2PBI, made of two zinc or free-base porphyrins covalently attached to a central perylene bisimide unit has been investigated in dichloromethane and in toluene. The solvent has been shown to affect not only quantitatively but also qualitatively the photophysical behavior. A variety of intercomponent processes (singlet energy transfer, triplet energy transfer, photoinduced charge separation, and recombination) have been time-resolved using a combination of emission spectroscopy and femtosecond and nanosecond time-resolved absorption techniques yielding a very detailed picture of the photophysics of these systems. The singlet excited state of the lowest energy chromophore (perylene bisimide in the case of (ZnP)2PBI, porphyrin in the case of (H2P)2PBI) is always quantitatively populated, besides by direct light absorption, by ultrafast singlet energy transfer (few picosecond time constant) from the higher energy chromophore. In dichloromethane, the lowest excited singlet state is efficiently quenched by electron transfer leading to a charge-separated state where the porphyrin is oxidized and the perylene bisimide is reduced. The systems then go back to the ground state by charge recombination. The four charge separation and recombination processes observed for (ZnP)2PBI and (H2P)2PBI in dichloromethane take place in the sub-nanosecond time scale. They obey standard free-energy correlations with charge separation lying in the normal regime and charge recombination in the Marcus inverted region. In less polar solvents, such as toluene, the energy of the charge-separated states is substantially lifted leading to sharp changes in photophysical mechanism. With (ZnP)2PBI, the electron-transfer quenching is still fast, but charge recombination takes place now in the nanosecond time scale and to triplet state products rather than to the ground state. Triplet-triplet energy transfer from the porphyrin to the perylene bisimide is also involved in the subsequent deactivation of the triplet manifold to the ground state. With (H2P)2PBI, on the other hand, the driving force for charge separation is too small for electron-transfer quenching, and the deactivation of the porphyrin excited singlet takes place via intersystem crossing to the triplet followed by triplet energy transfer to the perylene bisimide and final decay to the ground state.     

Density functional theory study of the binding capability of tris(pyrazol-1-yl)methane toward Cu(I) and Ag(I) cations

Density functional theory (DFT) has been used to look into the electronic structure of [M(tpm)]+ molecular ion conformers (M = Cu, Ag; tpm = tris(pyrazol-1-yl)methane) and to study the energetics of their interconversion. Theoretical data pertaining to the free tpm state the intrinsic instability of its kappa3-like conformation, thus indicating that, even though frequently observed, the kappa3-tripodal coordinative mode is unlikely to be directly achieved through the interaction of M(I) with the kappa3-like tpm conformer. It is also found that the energy barrier for the kappa2-[M(tpm)]+ --> kappa3-[M(tpm)]+ conversion is negligible. As far as the bonding scheme is concerned, the tpm --> M(I) donation, both sigma and pi in character, is the main source of the M(I)-tpm bonding, whereas back-donation from completely occupied M(I) d orbitals into tpm-based pi* levels plays a negligible role.     

Complexation of morin with three kinds of cyclodextrin. A thermodynamic and reactivity study

Properties of inclusion complexes between morin (M) and beta-cyclodextrin (betaCD), 2-hydroxypropyl-beta-cyclodextrin (HPbetaCD) and Heptakis (2,6-O-di methyl) beta-cyclodextrin (DMbetaCD) such as aqueous solubility and the association constants of this complex have been determined. The water solubility of morin was increased by inclusion with cyclodextrins. The phase-solubility diagrams drawn from UV spectral measurements are of the A(L)-type. Also ORAC(FL) studies were done. An increase in the antioxidant reactivity is observed when morin form inclusion complex with the three cyclodextrin studied. Finally, thermodynamics studies of cyclodextrin complexes indicated that for DMbetaCD the inclusion is primarily enthalpy-driven process meanwhile betaCD and HPbetaCD are entropy-driven processes. This is corroborated by the different inclusion geometries obtained by 2D-NMR.