Phenol transformation photosensitised by quinoid compounds

The phototransformation of phenol in aqueous solution was studied with different quinoid compounds, which are usually detected on atmospheric particulate matter: 2-ethylanthraquinone (EtAQ), benzanthracene-7,12-dione (BAD), 5,12-naphthacenequinone (NQ), 9,10-anthraquinone (AQ), and 2,6-dihydroxyanthraquinone (DAQ). All the studied quinones were able to sensitise the phototransformation of phenol. Under blue-light irradiation the approximated, polychromatic quantum yields for phenol photodegradation were in the order AQ > BAD > EtAQ > NQ > DAQ. Quantum mechanical calculations showed that AQ and DAQ have a very different spin distribution in the triplet state (largely located on the carbonyl oxygen and delocalised over the aromatic ring, respectively) that could account for the difference in reactivity. The spin distribution of EtAQ is similar to that of AQ. Under simulated sunlight, EtAQ induced the highest rate of phenol degradation. Radiation-excited EtAQ would oxidise both ground-state EtAQ and phenol; a kinetic model that excludes the ˙OH radical and singlet oxygen as reactive species is supported by the experimental data. Quinones were also able to oxidise nitrite to nitrogen dioxide, thereby inducing phenol nitration. Such a process is a potential source of nitrogen dioxide and nitrophenols in the atmospheric aerosols.     

Type I Photosensitization of 2′‐deoxyadenosine 5′‐monophosphate (5′‐dAMP) by Biopterin and its Photoproduct Formylpterin

Biopterin (Bip) and its photoproducts 6‐formylpterin (Fop) and 6‐carboxypterin (Cap) accumulate in the skin of patients suffering from vitiligo, a chronic depigmentation disorder where the protection against UV radiation fails because of the lack of melanin. These compounds absorb in the UV‐A inducing a potential photosensitizing action that can cause damage to DNA and other biomolecules. In this work, we have investigated the capability of these pterin derivatives (Pt) to act as photosensitizers under UV‐A irradiation for the degradation of 2′‐deoxyadenosine 5′‐monophosphate (5′‐dAMP) in aqueous solutions, as model DNA target. Steady‐state and time‐resolved experiments were performed and the effect of pH was evaluated. The results showed that photosensitized degradation of 5′‐dAMP was only observed under acidic conditions, and a mechanistic analysis revealed the participation of the triplet excited state of the pterin derivatives (³Pt*) by electron transfer yielding the corresponding pair of radical ions (Pt^?? and 5′‐dAMP^?+), with successive photosensitizer recovery by electron transfer from Pt^?? to O₂. Finally, 5′‐dAMP^?+ participates in subsequent reactions to yield degradation products.     

Selective Sulfenylative Desulfonylation or Decarbalkoxylation of α-Sulfonyl Malonates with DABCO or Bu3N: Reactivity and Conformational Analysis

The study on reactivity of several α-substituted α-sulfonyl malonates toward 1,4-diazabicyclo[2.2.2]octane (DABCO) and Bu₃N is described. The reactivity with DABCO revealed the possible competition between decarbalkoxylation and unexpected desulfonylation, depending on the α-substituent, because of sterical hindrance around the electrophilic centers (SO₂ and CO₂R). The derivatives with crowded α-substituents suffer selective desulfonylation, and a novel and efficient desulfonylation method can be proposed. The dependence of the reactivity of α-sulfonyl malonates on the sterical hindrance around the electrophilic centers is confirmed by conformational analysis (Macromodel/MM2? and Mopac/MP3). The carbanionic mechanism is proved because the corresponding protonated, deuterated, and sulfenylated products were obtained by addition of the corresponding electrophilic agents. Bu₃N showed itself to be a novel selective decarbalkoxylation agent for any α-substituted α-sulfonyl malonate.     

Dihalocarbene Addition to Vinylic Selenides-1,1-dihalo-2-(phenylseleno) cyclopropanes

Dihalocarbenes generated under phase transfer conditions add to cis and trans vinylic selenides to give the corresponding 1,1-dihalo-2-selenocyciopropanes with retention of configuration.     

The Reduction of Benzofuroxans by Ferrous Salts and by Thiophenol

Treatment of benzofuroxan derivatives with ferrous sulphate in DMSO/water solution affords in high yield o-nitroanilines. o-Nitroaniline was also obtained by reduction of benzofuroxan with thiophenol in presence of catalytic amount of Fe²⁺ or Fe³⁺ salts.     

Modeling associating hydrocarbon + alcohol mixtures using the Peng-Robinson equation of state and the Wong-Sandler mixing rules

The main objective of the study is the accurate modeling of the bubble pressure and of the vapor phase concentration in associating hydrocarbon + alcohol mixtures and the correct comparison with results from the literature. A relatively simple equation of state is used and comparison is done considering various factors that affect the accuracy of the results, so fair and correct conclusions can be drawn. The mathematical complexity of the model, the type and amount of basic properties and the number of adjustable parameters used by the model, among other factors are discussed. The Peng-Robinson equation of state including the Wong-Sandler mixing rules was used. This combination of equations of state and mixing rules have not yet been applied in a systematic way to alcohol + hydrocarbon mixtures at low and moderate pressure, as done in this work, although other complex equation of state models have been used for some selected systems. It is concluded that simple and well-founded models can correlate equilibrium data in these complex mixtures with similar accuracy than other more sophisticated models.     

Cholesterol oxidation in meat-based baby foods

Cholesterol oxidation in commercial meat-based homogenized and freeze-dried baby foods was examined. The 7 major products of this reaction were determined by gas chromatography coupled with mass spectrometry (GC-MS). As far as single cholesterol oxidation products (COP) are concerned, 7-ketocholesterol was the major product of direct cholesterol oxidation in the 2 groups of analyzed samples, and this study confirmed that it is a useful marker of the whole cholesterol oxidation process. Nevertheless, the amounts of cholesterol-5beta,6beta-epoxide were often similar to and sometimes higher than the amounts of 7-ketocholesterol, thus showing a strong development of both direct and indirect cholesterol oxidation pathways. Total COP content was significantly higher in freeze-dried than in homogenized products. Moreover, in freeze-dried samples, the COP content per serving was quite variable and, in 2 samples, it was close to or even higher than 500 microg. The greater development of cholesterol oxidation in the freeze-dried samples was confirmed by their highest total COP/cholesterol percent ratios. A constant correlation between the fatty acid composition and the development of cholesterol oxidation was not found, although a positive correlation between unsaturated fatty acid content and total COP content occasionally exists in samples of the same brand.     

Adsorption isotherms of a molecular imprinted polymer prepared in the presence of a polymerisable template: Indirect evidence of the formation of template clusters in the binding site

The current opinion about molecular imprinted polymers (MIPs) is that their molecular recognition properties are due to the presence of nanocavities formed during a polymerization process developed in the presence of a template molecule. According to this principle, the shape of these nanocavities is complementary to that of the template and non-covalent interactions are established between the binding site and a single template molecule. Nevertheless, there are some experimental indications that the real molecular recognition mechanism involves clusters of template molecules being packed into the binding site. Recently, it has been proposed that template molecules covalently linked to the binding site can act as nucleation points, enhancing the formation of these molecular clusters.We have tested this hypothesis by studying the adsorption isotherms of polymers prepared by imprinting them with 2,4,5-trichlorophenoxyacetic acid (2,4,5-T). Three different polymers were considered: P0, prepared without the template, P1, whose template was represented by 2,4,5-T molecules, and P2, whose template was 1/3 constituted by the polymerisable 2-(2,4,5-trichlorophenoxyacetoxy)-ethylmethacrylate (2,4,5-TEMA) and 2/3 by 2,4,5-T. The polymers were prepared by thermoinduced polymerization of template mixtures, 4-vinylpyridine and ethylene dimethacrylate. The crushed polymers were packed into HPLC columns and frontal chromatographic runs were performed by eluting the columns with a mobile phase containing variable amounts of 2,4,5-T.The experimental adsorption isotherms were fitted by using several isotherm models, and the Freundlich-Langmuir model was found to give the best fitting in terms of F-test. All the models considered showed a significant difference between the affinity constant values measured for the polymer P1 and P2, with a higher value for the polymer P2 (for Freundlich-Langmuir model: polymer P1, k=(2.00±0.43)×10⁴ M⁻¹; polymer P2, k=(1.93±0.0535)×10⁵ M⁻¹; ratio P2/P1, 9.65±2.09). Such experimental results support the hypothesis that a polymer prepared with a limited amount of template covalently attached to the binding site shows an increased affinity for the template itself.