Formation of a nanostructured layer on bioglass particles of different sizes immersed in tris-buffered solution. N2 adsorption and HR-TEM/EDS analysis

Morphological and structural variations of particles of Bioglass with two different grain sizes reacted in Tris-buffered solution were analyzed by means of N(2) adsorption/desorption at 77 K and HR-TEM/EDS. A remarkable increase in specific surface area (ssa) was observed after the first hour of dissolution. A plateau value corresponding to an increase of at least 2 orders of magnitude was reached after 2 days of dissolution. The ssa increase was faster for the smaller particle size sample, and the ratio between the ssa of the starting samples was not maintained during dissolution. Both micro- and mesopores were formed at different stages of the reaction for the two samples. Increasing ssa was also connected to the formation of a microcrystalline structure rich in Ca and P, as shown by TEM images. The segregation of both a SiO(2)-rich amorphous phase and a Ca/P-rich crystalline phase was observed after the first hour of dissolution. After 2 days of reaction, Ca/P-rich particles made of fine aciculate crystals were found either in close contact with SiO(2) particles or deposited on a small SiO(2)-rich core. A preliminary analysis of TEM data showed the formation, together with hydroxy carbonate apatite, of different types of calcium phosphates not detectable by powder X-ray diffraction.     

Analysis of nitriles at low parts per million levels by capillary gas chromatography

Two methods have been developed for the determination of trace levels of acetonitrile and propionitrile in light naphthas. One involves clean-up and preconcentration by medium pressure liquid chromatography (MPLC) in which nitriles are concentrated ten-fold while the complex hydrocarbon matris is removed. The concentrated solution is then analyzed by high resolution GC with flame ionization detection. The second method involves direct injection of samples into a capillary GC equipped with chemiluminescence nitrogen detection. The results and repeatability obtained from both methods are comparable. Preconcentration enables identification by GC-MS and simultaneous analysis of other polar species, with no need for selective detectors. Direct analysis is, on the other hand, much less time-consuming and requires less sample.     

Adsorption isotherms of a molecular imprinted polymer prepared in the presence of a polymerisable template: Indirect evidence of the formation of template clusters in the binding site

The current opinion about molecular imprinted polymers (MIPs) is that their molecular recognition properties are due to the presence of nanocavities formed during a polymerization process developed in the presence of a template molecule. According to this principle, the shape of these nanocavities is complementary to that of the template and non-covalent interactions are established between the binding site and a single template molecule. Nevertheless, there are some experimental indications that the real molecular recognition mechanism involves clusters of template molecules being packed into the binding site. Recently, it has been proposed that template molecules covalently linked to the binding site can act as nucleation points, enhancing the formation of these molecular clusters.We have tested this hypothesis by studying the adsorption isotherms of polymers prepared by imprinting them with 2,4,5-trichlorophenoxyacetic acid (2,4,5-T). Three different polymers were considered: P0, prepared without the template, P1, whose template was represented by 2,4,5-T molecules, and P2, whose template was 1/3 constituted by the polymerisable 2-(2,4,5-trichlorophenoxyacetoxy)-ethylmethacrylate (2,4,5-TEMA) and 2/3 by 2,4,5-T. The polymers were prepared by thermoinduced polymerization of template mixtures, 4-vinylpyridine and ethylene dimethacrylate. The crushed polymers were packed into HPLC columns and frontal chromatographic runs were performed by eluting the columns with a mobile phase containing variable amounts of 2,4,5-T.The experimental adsorption isotherms were fitted by using several isotherm models, and the Freundlich-Langmuir model was found to give the best fitting in terms of F-test. All the models considered showed a significant difference between the affinity constant values measured for the polymer P1 and P2, with a higher value for the polymer P2 (for Freundlich-Langmuir model: polymer P1, k=(2.00±0.43)×10⁴ M⁻¹; polymer P2, k=(1.93±0.0535)×10⁵ M⁻¹; ratio P2/P1, 9.65±2.09). Such experimental results support the hypothesis that a polymer prepared with a limited amount of template covalently attached to the binding site shows an increased affinity for the template itself.     

Reagents and synthetic methods 55. New methods for the preparation of t-butyldimethylsilyl triflate and trimethylsilyl triflate.

An expeditious synthesis of t-butyldimethylsilyl triflate is described from triflic acid and t-butyldimethylsilane. Reaction between trichloromethyltrimethylsilane and triflic acid is also reported.     

Labelling of organotin compounds for fluorimetric detection

A systematic study of the fluorescence of complexes of some flavone derivatives with organotin compounds in hexane and in an aqueous micellar medium on Triton X-100 is reported. Some relationships between fluorescence intensity and the structure of the fluorogenic reagent or that of the organotin compound can be deduced, and the most suitable reagent for each organotin species can be chosen on the basis of sensitivity and selectivity. Results point out that flavone derivatives are appropriate post-column derivatization reagents for organotin compounds in liquid chromatography.     

Why is the partial molar volume of CO2 so small when dissolved in a room temperature ionic liquid? Structure and dynamics of CO2 dissolved in [Bmim+] [PF6(-)

When supercritical CO2 is dissolved in an ionic liquid, its partial molar volume is much smaller than that observed in most other solvents. In this article we explore in atomistic detail and explain in an intuitive way the peculiar volumetric behavior experimentally observed when supercritical CO2 is dissolved in 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim+] [PF6(-)]). We also provide physical insight into the structure and dynamics occurring across the boundary of the CO2 ionic liquid interface. We find that the liquid structure of [Bmim+] [PF6(-)] in the presence of CO2 is nearly identical to that in the neat ionic liquid (IL) even at fairly large mole fractions of CO2. Our simulations indicate, in agreement with experiments, that partial miscibilities of one fluid into the other are very unsymmetrical, CO2 being highly soluble in the ionic liquid phase while the ionic liquid is highly insoluble in the CO2 phase. We interpret our results in terms of the size and shape of spontaneously forming cavities in the ionic liquid phase, and we propose that CO2 occupies extremely well-defined locations in the IL. Even though our accurate prediction of cavity sizes in the neat IL indicates that these cavities are small compared with the van der Waals radius of a single carbon or oxygen atom, CO2 appears to occupy a space that was for the most part a priori "empty".     

Chemical waves and pattern formation in the 1,2-dipalmitoyl-sn-glycero-3-phosphocholine/water lamellar system

The present work deals with the spatially extended oscillatory Belousov Zhabotinsky reaction-diffusion system carried out in an anisotropic environment of phosphatidylcholines/water binary system, which presents layered aqueous domains separated by lipid bilayers. We report the occurrence of stable Turing patterns, spiral waves, and other exotic structures in phospholipids bilayers that are generally used as a models for cell plasma membranes.     

Quassinoids from Picrasma crenata

From woods of Picrasma crenata, a new stereoisomer dihydronorneoquassin was obtained together with others well knowns dihydronorneoquassin, parain, alpha-neoquassin, beta-neoquassin and quassin. The structures were determined by spectroscopic data and chemical evidence.     

The ring-closing metathesis of vinyl ethers with Grubbs'' catalyst for the synthesis of dihydropyrans

A series of acyclic vinyl ethers have been prepared and treated with Grubbs' ruthenium catalyst ((Cy₃P)₂RuCl₂=CHPh). Contrary to previous findings, it has been shown that certain vinyl ethers are excellent substrates for the ring closing metathesis with ruthenium based catalysts.