Phenol photonitration

This paper presents some new data on nitrophenol formation from phenol under illumination, and reviews the studies performed on phenol photonitration, from its discovery in 1988 to the very recent elucidation of its reaction pathway by the authors. Recent experimental results account for the pH effect on phenol photonitration. The nitrogen sources so far investigated are nitrate and nitrite, which undergo photolysis upon absorption of near-UV light. These studies have given a relevant information on the role of both nitrate and nitrite as environmental factors. Such processes can take place both in natural waters and in atmospheric hydrometeors.     

Chromatographic and column stability at pH 7 of a C18 dimethylurea polar stationary phase

Chromatographic evaluations of a C18 dimethylurea phase in 150 mm x 3.9 mm HPLC columns were performed using the Tanaka and Engelhardt test mixtures. The applicability of the new C18 dimethylurea phase was also evaluated with a mixture of some herbicides and their metabolites. An artificial aging procedure was also performed by passing a potassium phosphate mobile phase buffered at pH 7.0 through C18 50 mm x 3.9 mm dimethylurea columns. The column stability was evaluated by means of the chromatographic parameters obtained for the separation of some compounds from the Neue test mixture, using apolar, polar and highly basic analytes.     

A mild and efficient method for halogenation of 3,5-dimethyl pyrazoles by ultrasound irradiation using N-halosuccinimides

The 4-halo-3,5-dimethyl pyrazoles have been synthetisized in good yields in short reaction times in the absence of a catalyst by reaction of 3,5-dimethyl pyrazoles with N-halosuccinimides (NBS, NCS and NIS) under ultrasound irradiation. Finally, the halogenation of pyrazoles with Br₂, ICl and I₂ was showed in similar conditions.     

31P{1H}-n.m.r. as a tool for identification of ruthenium isomers containing PPh3 or 1,4-bis(diphenylphosphino)butane ligands. X-ray structures of the cis-{RuCl2(PPh3)2 [4,4′-(-X)2-2,2′-bipy]} complexes [X=-H, -Me, -SMe and (-Cl, -Me)]

A series of cis-{RuCl₂(PPh₃)₂[4,4-(X)₂-2,2-bipy]} [cis-chlorines; X=-H, -Me, -SMe, and (-Cl,-Me)] complexes have had their structures determined by single crystal X-ray diffraction. The geometry of these complexes, also determined in CH₂Cl₂ solution by ³¹P{¹H}-n.m.r. spectroscopy, showed that the chemical shifts for the phosphorus atoms are slightly dependent on the pKa of the 4,4-(-X)₂-2,2-bipy ligands.     

Fluoropolyethers end‐capped by polar functional groups. IV. A novel approach to the evaluation of reactivities of hydroxy‐terminated ethoxylated fluoropolyethers in the tin(IV)‐catalyzed reactions with isophorone diisocyanate

The effect of catalyst dibutyltin dilaurate (DBTDL) on the kinetics of urethane formation reactions of α,ω‐bis(hydroxy)‐terminated fluoropolyethers Fomblin® Z‐DOL TXs (FPEs) of various molecular weights and poly(oxyethylene) glycol PEG‐400 with isophorone diisocyanate (IPDI) in hexafluoroxylene (HFX) and tetrahydrofuran (THF) at 40 °C and NCO:OH = 2:1 have been studied in a broad range of catalyst (0.10–9.00) ×10^?4 M and total reagents (10.0–60.1 wt %) concentrations. The rate of tin‐catalyzed second‐order reactions (with respect to diol and diisocyanate) was found to be proportional to the square root of catalyst concentration [DBTDL]^0.5 both in low polar (HFX) and polar (THF) solvents. Effect of catalyst saturation was revealed for all the reaction systems at higher DBTDL concentrations as well as the appearance of the limiting catalyst concentrations C_lim below which the rates of reaction were close to zero. Based on these findings new effective rate coefficients have been derived k = k_cat/(C ? C) that are independent of the total reagent concentration in the range of 10.0–60.1 wt % ([OH] = 0.10–0.91 equiv/L). This new approach highlights that the rate of the tin‐catalyzed urethane formation reactions of α,ω‐bis(hydroxy)‐terminated fluoropolyethers Z‐DOL TXs with IPDI in HFX at 40 °C and NCO:OH = 2:1 increases significantly with increasing MW of FPE from 776 up to 3405. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5354–5371, 2004     

Soluble alpha-amino acid salts in acetonitrile: practical technology for the production of some dipeptides

Alpha-amino acids are soluble in acetonitrile when treated with phosphazene bases. As a result, the protection/deprotection events that are usually required for peptide coupling reactions can be minimized. This is illustrated in the synthesis of the important angiotensin-converting enzyme (ACE) inhibitor enalapril. [reaction: see text]     

Reversed-phase HPLC separation of complex mixtures of trace metals as dibenzyldithiocarbamate chelates

The dibenzyldithiocarbamate chelates of Cd(II), Pb(II), Bi(III), Hg(II), Ni(II), Cu(II), As(III), Fe(III), Co(III) and In(III) are separated by reversed-phase HPLC in isocratic conditions. The procedure is simple, rapid, and gives satisfactory separations with high efficiency and sensitivity at mobile phase compositions very rich in organic modifier (85-88% CH(3)CN). The detection limits range from 1.4 to 14 mug/1. The elution order is correlated with the ability of the central metal atom to affect the electronic distribution of the ligand, which has readily polarizable donor atoms. Infrared spectroscopy data corroborate this assumption.     

A highly specific polyclonal antiserum to the environmental contaminant 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT)

A very selective polyclonal antiserum against 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT) was obtained by a careful choice of the haptenic structure (2,2-bis(4-chlorophenyl)-ethanol hemisuccinate). This hapten was conjugated to BSA to prepare the immunogen. The effects of different types of solid phases on the equilibrium reaction between the hapten on solid phase and the polyclonal antiserum were evaluated to obtain a fine tuning of the antiserum performances in terms of specificity for p,p′-DDT and sensitivity to low levels of this pesticide. The calibration curves obtained show that it is possible to set up a sensitive assay for p,p′-DDT, employing a p,p′-dichlorodiphenylacetic acid-based solid phase, with a detection limit of 0.12 ng/mL and a working range of about 0.21–40 ng/mL. Selectivity towards several p,p′-DDT-related substances was good (o,p-DDT 17%, p,p′-DDD 1.2% o,p-DDD 6.3%, p,p′-DDE 6.7%). Received: 4 November 1996 / Revised: 9 June 1997 / Accepted: 16 June 1997     

(Bis(1,2,4-triazol-1-yl)methane)silver(I) phosphino complexes: structures and spectroscopic properties of mixed-ligand coordination polymers

Adducts of the ligand bis(1,2,4-triazol-1-yl)methane (tz(2)(CH(2))) of the form AgX:tz(2)(CH(2)):ER(3):MeCN (1:1:1:x) (X = NO(3), R = Ph, E = P, As, or Sb, x = 1 or 2; X = NO(2), ClO(4), O(3)SCF(3), E = P, R = Ph, x = 0, 1 or 2; X = NO(3), ClO(4), E = P, R = cy, x = 1; X = ClO(4), E = As, R = Ph, x = 2) and AgNO(3):tz(2)(CH(2)):P(o-tolyl)(3) (2:2:1) have been synthesized and characterized in the solid state and in solution by analyses, spectral (IR, far-IR, (1)H and (13)C NMR, ESI MS data) data, and conductivity measurements. In the one-dimensional polymers (characterized by X-ray studies) AgNO(3):tz(2)(CH(2)):PPh(3):CH(3)CN (1:1:1:1), AgClO(4):tz(2)(CH(2)):PPh(3):CH(3)CN (1:1:1:2), AgNO(3):tz(2)(CH(2)):AsPh(3): CH(3)CN (1:1:1:2), and AgNO(3):tz(2)(CH(2)):SbPh(3):CH(3)CN (1:1:1:2), the silver atom can be regarded as four-coordinate, the tz(2)(CH(2)) ligands behaving as bridging groups rather than chelates, with no pair of ligands being dominant, quasi-trans, in their interactions. The AgNO(3):tz(2)(CH(2)):P(o-tolyl)(3) (2:2:1) adduct is a two-dimensional polymer containing two independent silver atoms, one four-coordinated unsymmetrically by a pair of triazolyl rings, one P(o-tolyl)(3), and a unidentate nitrate and the second by a quasi-symmetrical O(2)NO chelate and a pair of equivalent triazolyl rings.     

Sensitivity improvement in 19F NMR-based screening experiments: theoretical considerations and experimental applications

NMR-based binding and functional screening performed with FAXS (fluorine chemical shift anisotropy and exchange for screening) and 3-FABS (three fluorine atoms for biochemical screening) represents a potential alternative approach to high-throughput screening for the identification of novel potential drug candidates. The major limitation of this method in its current status is its intrinsic low sensitivity that limits the number of tested compounds. One approach for overcoming this problem is the use of a cryogenically cooled (19)F probe that reduces the thermal noise in the receiver circuitry. Sensitivity improvement in the two screening techniques achieved with the novel cryogenic (19)F probe technology permits an increased throughput, detection of weaker binders and inhibitors (relevant in a fragment-based lead discovery program), detection of slow binders, and reduction in protein and substrate consumption. These aspects are analyzed with theoretical simulations and experimental quantitative performance evaluation. Application of 3-FABS combined with the cryogenic (19)F probe technology to rapid screening at very low enzyme concentrations and the current detection limits reached with this approach are also presented.