Rapid field screening test for determination of 2,4,6-trinitrotoluene in water and soil with immunofiltration

A rapid field screening test for 2,4,6-trinitrotoluene (TNT) in water and soil is described. The immunofiltration assay is based on a simplified enzymelinked immunosorbent assay (ELISA) performed in a pre-packed portable device. Performance of the test was assayed in spiked water, methanolic soil extracts (dilution 1: 10) and natural water samples. A quantitative colour response to concentrations of TNT in the range of 1 to 30 g/l in water and 50 to 1000 g/kg in soil is demonstrated. The relative average standard deviations are 11.9% and 14.1%, respectively. High correlations between immunofiltration, ELISA and gas chromatography have been demonstrated. The cross reactivities of the antibody are comparable in both techniques.Dedicated to Professor Dr. Dieter Klockow on the occasion of his 60th birthday     

Kinetic studies of some substituted hexarhodium carbonyl clusters

Reactions of the halides X- (X- = chloride, bromide or iodide) with the substituted cluster Rh6(CO)15(PPh3) in oxygen-free chloroform lead to [Rh5(CO)14(PPh3)]-, Rh(CO)2(PPh3)2X and [Rh(CO)2X2]- in the molar ratios 2:1: approximately 13. Oxidation by the solvent is assumed to lead to most of the Rh(I) product, and the stoichiometry for reactions with I- can be defined as 4Rh6(CO)15(PPh3) + 27I- + 12CHCl3 --> 2[Rh5(CO)14(PPh3)]- + Rh(CO)2(PPh3)2I + 13[Rh(CO)2I2]- + 6C2H2Cl4 + 4CO + 12Cl-. This can be rationalized quite simply with the aid of a few generally justifiable assumptions. Rate constants for reactions with bromide increase to a limiting value with increasing [Br-] in a way that shows that breaking of one Rh-Rh bond, with an unusual closo to nido structural change, is rate determining. This opening of the cluster might be spontaneous or solvent induced. To complete the reaction, the bromide has to compete with the reverse nido to closo change. The same closo to nido change is also a major rate determining step for reactions with P(OPh)3 in oxygen-free solutions, and for reactions with bromide in oxygenated solutions in the presence of trifluoroacetic and some other acids. The limiting rates increase slightly with increasing basicity of the ligands P(p-XC6H4)3 along the series X = F3C, Cl, F, H and MeO. Activation parameters for these reactions are reported.     

Activation of alkenes and H2 by [Fe]-H2ase model complexes

The established ability of the Fe(II) bridging hydride species (micro-H)(micro-pdt)[Fe(CO)2(PMe3)]2+, 1-H+, to take-up and heterolytically activate dihydrogen, resulting in H/D scrambling of H2/D2 and H2/D2O mixtures (Zhao et al. Inorg. Chem. 2002, 41, 3917) has prompted a study of simultaneous alkene/H2 activation by such [Fe]H2ase model complexes. That the required photolysis produced an open site was substantiated by substitution of CO in 1-H+ by CH3CN with formation of structurally characterized [(micro-H)(micro-pdt)[Fe(CO)2(PMe3)][Fe(CO)(CH3CN)(PMe3)]]+[PF6]-. Under similar photolytic conditions, H/D exchange reactions between D2 and terminal alkenes (ethylene, propene and 1-butene), but not bulkier alkenes such as 2-butene or cyclohexene, were catalyzed by 1-H+ and the edt (SCH2CH2S) analogue, 2-H+. Substantial regioselectivity for H/D exchange at the internal vinylic hydrogen was observed. The extent to which the olefins were deuterium enriched vs deuterated was catalyst dependent. The stabilizing effect of the binuclear chelating ligands, SCH2CH2CH2S, pdt, and SCH2CH2S, edt, is required for the activity of binuclear catalysts, as the mono-dentate micro-SEt analogue decomposed to inactive products under the photolytic conditions of the catalysis. Reactions of 1 and 2 with EtOSO2CF3 yielded the S-alkylated products, [(micro-SCH2CH2CH2SEt)[Fe(CO)2(PMe3)]2]+[SO3CF3]- (1-Et+), and 2-Et+, rather than micro-C2H5 analogues to the micro-H of 1-H+. The stability and lack of reactivity toward H2 of 1-Et+ and 2-Et+, indicates they are not on the reaction path of the olefin/D2 H/D exchange process. A mechanism with olefin binding to an open site created by CO loss and formation of an Fe-(CH2CHDR) intermediate is indicated. A likely role of a binuclear chelate effect is implicated for the unique S-XXX-S cofactor in the active site of [Fe]H2ase.     

Preparative and electrochemical investigations on the electron sponge behavior of cobalt telluride clusters: CO substitution in [Co11Te7(CO)10]n- ions (n=1, 2) by PMe2Ph and crystal structure of [Co11Te7(CO)5(PMe2Ph)5

The reaction of the cluster salts [Cp(2*) Nb(CO)(2)](n)[Co(11)Te(7)(CO)(10)] (Cp*=C(5)Me(5); n=1, 2) with excess PMe(2)Ph gave the neutral, dark brown clusters [Co(11)Te(7)(CO)(6)(PMe(2)Ph)(4)] (5) and [Co(11)Te(7)(CO)(5)(PMe(2)Ph)(5)] (6) with 147 metal valence electrons. The new compounds were characterized by IR spectroscopy, elemental analyses, and mass spectrometry. The molecular structure of 6 was determined by X-ray crystallography. Like its precursor anion, it consists of a pentagonal-prismatic [Co(11)Te(7)] core, but with a ligand sphere composed of five CO and five PMe(2)Ph ligands. Detailed electrochemical studies of both reactions reveal that a stepwise substitution of CO ligands in the initial cluster anions takes place leading to intermediate [Co(11)Te(7)(CO)(10-m)(PMe(2)Ph)(m)](n-) ions (m=1-5; n=1, 2). Each of these intermediates is distinguished by at least one oxidation and two reduction waves, giving rise to a total of 21 redox couples and 27 electroactive species. The electron sponge character of the new compounds is particularly pronounced in 5, which exhibits charges n between +1 and -4 corresponding to metal valence electron counts of between 146 and 151.     

Rhenium oxo complexes of a chelating diyne ligand. Synthesis and study of the kinetics of protonation

A series of oxo complexes, Re(O)X(diyne) (X = I, Me, Et), have been prepared from 2,7-nonadiyne and Re(O)I(3)(PPh(3))(2). Addition of B(C(6)F(5))(3) to Re(O)I(2,7-nonadiyne) (5) results in coordination of the oxo ligand to the boron. The protonation of Re(O)(X)(2-butyne)(2) and Re(O)(X)(2,7-nonadiyne)(2) with a variety of acids has been examined. With 5 and HBF(4)/Et(2)O, the ultimate product was [Re(CH(3)CN)(3)(I)(2,7-nonadiyne)](2+) (7). The conversion of 5 to 7 changes the conformation of the diyne ligand from a "chair" to a "boat" and shifts its propargylic protons considerably downfield in the (1)H NMR. The kinetics of the protonation of Re(O)I(2,7-nonadiyne) (5) by CF(3)SO(3)H in CH(3)CN have been monitored by visible spectroscopy, in a stopped-flow apparatus, and by low temperature (1)H NMR. Two second-order rate constants, presumably successive protonations, were observed in the stopped-flow, k(1) = 11.9 M(-)(1) s(-)(1) and k(2) = 3.8 M(-)(1) s(-)(1). Low temperature (1)H NMR spectroscopy indicated that the resulting solution contained a mixture of two doubly protonated intermediates X and Y, each of which slowly formed the product 7 via an acid-independent process.     

Completely regioselective, highly stereoselective syntheses of cis-Bisfullerene

cis-Bisfullerene[60] adducts of 6,13-disubstituted pentacenes (R = Ph, 4'-hydroxymethylphenyl) are synthesized in 75% to 85% isolated yields under kinetically controlled Diels-Alder conditions. The cycloadditions are completely regioselective and highly stereoselective, with only traces of the diastereomeric trans-bisfullerene[60] adducts forming.     

Elution of organic solutes from different polarity sorbents using subcritical water

The intermolecular interactions between organic solutes and sorbent matrices under subcritical water conditions have been investigated at a pressure of 50 bar and temperatures ranging from 50 to 250°C. Both polar and nonpolar organics (chlorophenols, amines, n-alkanes, and polycyclic aromatic hydrocarbons) and five different sorbent matrices (glass beads, alumina, Florisil, silica-bonded C₁₈, and polymeric XAD-4 resins) were used. From the same matrix, the polar solutes always eluted at lower temperatures, while the moderately polar and nonpolar solutes only eluted at higher temperatures. Similar to matrix effects previously observed using supercritical carbon dioxide, the sorbent type greatly influenced the elution efficiency under subcritical water conditions. Lower temperatures are sufficient to elute a particular solute from glass beads, alumina, and Florisil, but higher temperatures (less polar water) are needed to elute the same solute from silica-bonded C₁₈. The highest temperatures were required to elute aromatic organics from XAD-4. These matrix effects demonstrate that, while low temperature water can break inert or dipole interactions between solutes and glass beads, alumina, and Florisil, higher temperature water is required to interrupt the van der Waals attractions between solutes and silica-bonded C₁₈, and even higher temperatures needed to overcome the π-electron interactions between aromatic solutes and XAD-4.     

Iron chelation properties of an extracellular siderophore exochelin MN

The coordination chemistry of an extracellular siderophore produced by Mycobacterium neoaurum, exochelin MN (ExoMN), is reported along with its pK(a) values, Fe(III) and Fe(II) chelation constants, and aqueous solution speciation as determined by spectrophotometric and potentiometric titration techniques. Exochelin MN is of particular interest as it can efficiently transport iron into pathogenic M. leprae, which is responsible for leprosy, in addition to its own parent cells. The Fe(III) coordination properties of ExoMN are important with respect to understanding the Fe(III) acquisition and uptake mechanism in pathogenic M. leprae, as the siderophores from this organism are very difficult to isolate. Exochelin MN has two hydroxamic acid groups and an unusual threo-beta-hydroxy-l-histidine available for Fe(III) chelation. The presence of threo-beta-hydroxy-l-histidine gives rise to a unique mode of Fe(III) coordination. The pK(a) values for the two hydroxamic acid moieties, the histidine imidazole ring and the alkylammonium groups on ExoMN, correspond well with the literature values for these moieties. Proton-dependent Fe(III)- and Fe(II)-ExoMN equilibrium constants were determined using a model involving sequential protonation of the Fe(III)- and Fe(II)-ExoMN complexes. These data were used to develop a model whereby deprotonation reactions on the surface of the complex in the second coordination shell result in first coordination shell isomerization. The overall formation constants were calculated: log beta(110) = 39.12 for Fe(III)-ExoMN and 16.7 for Fe(II)-ExoMN. The calculated pFe value of 31.1 is one of the highest among all siderophores and their synthetic analogues and indicates that ExoMN is thermodynamically capable of removing Fe(III) from transferrin. The E(1/2) for the Fe(III)ExoMN/Fe(II)ExoMN(-) couple was determined to be -595 mV from quasi-reversible cyclic voltammograms at pH = 10.8, and the pH-dependent E(1/2) profile was used to determine the Fe(II)-ExoMN protonation constants.     

Electro-chromatography and the movement of complex ions

It is apparent that, in electro-chromatographic separations, the change of area undergone by the initial spot of test solution plays a part in the final interpretation of results almost as important as the actual movement of the centre of the spot.Several interesting facts have emerged from this research concerning the role of the carrier electrolyte on tlie movement, the spot size, and the stability of complex salts.