Outer-sphere effects on ligand-field excited-state dynamics: solvent dependence of high-spin to low-spin conversion in [Fe(bpy)3]2+

In condensed phase chemistry, the solvent can have a significant impact on everything from yield to product distribution to mechanism. With regard to photo-induced processes, solvent effects have been well-documented for charge-transfer states wherein the redistribution of charge subsequent to light absorption couples intramolecular dynamics to the local environment of the chromophore. Ligand-field excited states are expected to be largely insensitive to such perturbations given that their electronic rearrangements are localized on the metal center and are therefore insulated from so-called outer-sphere effects by the ligands themselves. In contrast to this expectation, we document herein a nearly two-fold variation in the time constant associated with the ⁵T₂ → ¹A₁ high-spin to low-spin relaxation process of tris(2,2′-bipyridine)iron(ii) ([Fe(bpy)₃]²⁺) across a range of different solvents. Likely origins for this solvent dependence, including relevant solvent properties, ion pairing, and changes in solvation energy, were considered and assessed by studying [Fe(bpy)₃]²⁺ and related derivatives via ultrafast time-resolved absorption spectroscopy and computational analyses. It was concluded that the effect is most likely associated with the volume change of the chromophore arising from the interconfigurational nature of the ⁵T₂ → ¹A₁ relaxation process, resulting in changes to the solvent–solvent and/or solvent–solute interactions of the primary solvation shell sufficient to alter the overall reorganization energy of the system and influencing the kinetics of ground-state recovery.

Time-resolved spectroscopic measurements of ground-state recovery for [Fe(bpy)₃]²⁺ reveal that the solvent can induce an outer-sphere reorganization energy effect on excited-state dynamics involving metal-centered ligand-field electronic states.     

Quantitative validation of different protein precipitation methods in proteome analysis of blood platelets

For the preparation of proteins for proteome analysis, precipitation is frequently used to concentrate proteins and to remove interfering compounds. Various methods for protein precipitation are applied, which rely on different chemical principles. This study compares the changes in the protein composition of human blood platelet extracts after precipitation with ethanol (EtOH) or trichloroacetic acid (TCA). Both methods yielded the same amount of proteins from the platelet preparations. However, the EtOH-precipitated samples had to be dialyzed because of the considerable salt content. To characterize single platelet proteins, samples were analyzed by two-dimensional fluorescence differential gel electrophoresis. More than 90% of all the spots were equally present in the EtOH- and TCA-precipitated samples. However, both precipitation methods showed a smaller correlation with nonprecipitated samples (EtOH 74.9%, TCA 79.2%). Several proteins were either reduced or relatively enriched in the precipitated samples. The proteins varied randomly in molecular weight and isoelectric point. This study shows that protein precipitation leads to specific changes in the protein composition of proteomics samples. This depends more on the specific structure of the protein than on the precipitating agent used in the experiment.     

A new multi analytical approach for the identification of synthetic and natural dyes mixtures. The case of orcein-mauveine mixture in a historical dress of a Sicilian noblewoman of nineteenth century

Abstract

In this paper, the application of a multi-analytical approach for the characterisation of synthetic and natural dyes in a historical textile is presented. The work is focused on a historical dress of a Sicilian noblewoman, dating from about 1865–1870. Firstly, SERS on fibre was performed, in order to individuate the classes of dyes employed. The SERS spectra suggested the presence of two main dyes: mauveine and orcein. In order to confirm these preliminary results, two different extraction protocols were applied. The extracts obtained were analysed by ESI-MS, MALDI-ToF and UHPCL-MS analyses, confirming the SERS results. In particular, the application of the ammonia mild extraction technique allowed to selectively extract the phenoxazonic dyes, separating them already in the extraction step from the synthetic ones. Thanks to this multi-analytical approach, this dress could be considered as one of the first examples of employment of synthetic dyes in association with natural ones.     

Electrode processes in the oxidation of tetrahydroisoquinoline derivatives

The electrochemical oxidation of the alkaloid laudanosine (Ia) to O-methylflavinantine (II) has been studied in acetonitrile solvent. Using cyclic voltammetry, rotating disc voltammetry and preparative electrolyses on several alkaloids, simple aliphatic amines and aromatic compounds, some aspects of the mechanism of this coupling reaction are elucidated. The first anodic wave for laudanosine at platinum has E_p=0.55 V vs. Ag/Ag⁺. The electrode rapidly becomes partially passivated at potentials above 0.5 V. This is due to a film which “dissolves” below 0.5 V, at a rate independent of the potential. It is shown that the reaction (Ia)→(II) proceeds at 0.5 V by initial oxidation of the amine moiety. If acids such as sodium bicarbonate are added to the anolyte the amine is protonated causing the first wave to disappear. Oxidation at 1.1 V under these acidic conditions produces the same product, but more rapidly and in significantly higher yield because electrode filming and side reactions resulting from the amine oxidation are abrogated.     

Structural basis for discriminative regulation of gene expression by adenine- and guanine-sensing mRNAs

Metabolite-sensing mRNAs, or "riboswitches," specifically interact with small ligands and direct expression of the genes involved in their metabolism. Riboswitches contain sensing "aptamer" modules, capable of ligand-induced structural changes, and downstream regions, harboring expression-controlling elements. We report the crystal structures of the add A-riboswitch and xpt G-riboswitch aptamer modules that distinguish between bound adenine and guanine with exquisite specificity and modulate expression of two different sets of genes. The riboswitches form tuning fork-like architectures, in which the prongs are held in parallel through hairpin loop interactions, and the internal bubble zippers up to form the purine binding pocket. The bound purines are held by hydrogen bonding interactions involving conserved nucleotides along their entire periphery. Recognition specificity is associated with Watson-Crick pairing of the encapsulated adenine and guanine ligands with uridine and cytosine, respectively.     

Binding of hexacyanoferrate(II) by aliphatic amines in aqueous solution

The stability of hexacyanoferrate(II)-amine(methylamine, ethylenediamine, diethylenetriamine and tetraethylenepentamine) was determined potentiometrically. Species Fe(CN)₆(A)H _j ^(j–4) (A=amine) are formed in all the systems investigated, with j=1...n+2 (n=number of aminogroups). Some other complexes Fe(CN)₆(A)_iH_j (with i>1) were also found. The stability of these complexes is fairly high: the full protonated amine species, show for the reaction Fe(CN)₆ ^4- + H_nAⁿ⁺ = Fe(CN)₆(A)H_n ^(n-4) an equilibrium constant given by logK=0.686+2.10n. Factors affecting the stability are discussed in comparison with similar systems, together with the importance of interferences.     

The surface of ordered mesoporous benzene-silica hybrid material: an infrared and ab initio molecular modeling study

Joint IR and computational results allow a detailed characterization of the surface properties of a mesoporous benzene-silica hybrid material with crystal-like wall structure. After outgassing at 450 degrees C, hydroxyl species mainly consist of noninteracting silanols, with both O-H and Si-O stretching modes at lower frequencies than those of SiOH in silica. Interaction with several probe molecules, followed both by experiment and calculus, shows that the aryl group in the coordination sphere of Si imparts a lesser acidity with respect to the isolated silanol in silica. In contrast, adsorption isotherms indicate that the interaction with acetone is stronger with benzene-silica than with silica: this is interpreted in terms of secondary interactions taking place between the slightly acidic CH in acetone and the electronic cloud in benzene-like rings. This suggests that both the inorganic component and the organic one play a role in dictating the surface behavior.     

Eliminative deoxygenation: the facile formation of α-trimethylsilyl vinyl sulfides from sulfoxides

Synthetically useful α-trimethylsilyl vinyl sulfides are generated in high yields by deoxygenation of the corresponding sulfoxides in the presence of excess LDA and trimethylsilyl chloride.     

Eliminative deoxygenation: A facile synthesis of α-cyano and α-carboalkoxy substituted vinyl sulfides

The faciIe eliminative deoxygenation of α-cyano and carboalkoxy sulfoxides by trimethylsilyl triflate under mildly basic conditions results in the formation of α-thiophenyl substituted α,β-unsaturated nitriles and esters in high yields.     

Adamantane-like cluster complexes of mixed-valent copper-copper and nickel-copper thiolates

Square-planar copper(II) and nickel(II) derivatives of the cis-dithiolate N(2)S(2) ligand bis(N,N'-2-mercapto-2-methylpropyl)-1,5-diazocyclooctane, (bme*daco)M, nucleate four Cu(I)Cl moieties, forming M(II)(2)Cu(I)(4)S(4) clusters with unusual triply bridging thiolates, mu(3)-SR, in the topological form of adamantane. As determined by X-ray crystallography, the (bme*daco)M (M = Cu or Ni) metallothiolate serves as a bidentate ligand that bridges four Cu(I) ions, utilizing all lone pairs on sulfurs. Further characterization by electrochemical and electronic spectral measurements suggests greater electron delocalization in the all-copper complex as compared to the NiCu heterometallic complex. Mass spectral data imply that the mixed-metal Ni(II)(2)Cu(I)(4)S(4) is more stable toward CuCl loss than Cu(II)(2)Cu(I)(4)S(4), a result that is corroborated by extraction of Cu(I) by 1,2-bis(diphenylphosphino)ethane in the latter but not the former.