Synthesis, characterization, and reactivity of ruthenium diene/diamine complexes including catalytic hydrogenation of ketones

Thermal reactions between [RuCl2(diene)]n (diene = 2,5-norbornadiene, nbd; 1,5-cyclooctadiene, cod) with an excess of N,N,N',N'-tetramethylethylene diamine (tmeda) afforded derivatives [RuCl2(diene)(tmeda)] (diene = nbd, 1; cod, 2) as a mixture of cis and trans isomers. When thermolysis was performed under H2 mixtures of hydride species [RuCl(H)(diene)(tmeda)] (diene = nbd, 3; cod, 4) and the bis-tmeda adduct trans-[RuCl2(tmeda)2] (5) were obtained in different ratios depending upon the reaction conditions and reaction times. Heating polymeric Ru(II) precursors in toluene in the presence of a 5-fold excess of the bulkier N,N,N',N'-tetraethylethylene diamine (teeda) resulted in a rare diamine dealkylation process with formation of trans-[RuCl2(nbd)(Et2NCH2CH2NHEt)] (6) and trans-[RuCl2(cod)(EtHNCH2CH2NHEt)] (7) in high yields. The presence of N-H functionalities in the coordinated diamine ligands of 6 and 7 was unambiguously established by single-crystal X-ray diffraction studies. The dealkylation process of the teeda ligand seems to proceed intramolecularly as shown by solution NMR studies performed with the soluble Ru(II) precursors trans-[RuCl2(amine)2(diene)] (diene = nbd, amine = morpholine, 9; diene = cod, amine = Et2NH, 10). The above complexes [RuCl2(diene)(diamine)] have been tested as precatalysts in the hydrogenation of ketones both for transfer as well as direct hydrogenation, the latter route being the most effective.     

Enantioselective separation of all-E-astaxanthin and its determination in microbial sources

A method for the enantioselective separation of all-E-astaxanthin (3,3'-dihydroxy-beta,beta-carotene-4,4'-dione), an important colorant in the feed industry, was developed. Different chiral stationary phases (CSPs) such as Pirkle phases (R,R Ulmo and l-leucine), modified polysaccharides and a beta-cyclodextrin have been investigated on their separation performance of astaxanthin enantiomers. Direct resolution was only achieved employing the Chiralcel OD-RH (cellulose-tris-3,5-dimethylphenyl-carbamate) under reversed phase conditions. The chiral separation of the enantiomeric forms of astaxanthin produced in microalgae and yeasts was reported. The yeast Xanthophyllomyces sp. produces astaxanthin predominantly in the R,R configuration, whereas in the green microalgae Scenedesmus sp. astaxanthin is built primarily in the S,S form. The separation method for the identification of astaxanthin enantiomers is of great interest since astaxanthin is used as functional food additive in human nutrition. Moreover the method may be used as a food chain indicator in farmed salmon.     

Comparison of the medium molecular weight venom fractions from five species of common social wasps by MALDI-TOF spectra profiling

The average spectral profiles and the exact mass weight (MW) of biomolecules present in the medium fraction (from 900 to 3000 Da) of the venom of five social wasps (three European and one North American Polistes and the European hornet Vespa crabro) were determined by matrix assisted laser desorption ionization time of flight (MALDI-TOF) MS. Data were obtained analyzing the venom of single specimens (N = 46) and elaborated with the ClinProTools 2.0 (CPT) software to search for differences among the five species examined. Interesting differences in the spectral profiles were found, allowing the discrimination of venoms belonging to the different species, and their possible use as a quality control method in venom immunotherapy (VIT) for allergic patients.     

Binary and ternary alkali polyphosphates (MPO3, M = Li,Na, K) for thermal energy storage

Journal of Thermal Analysis and Calorimetry - Up-to-date, solar salt (a mixture of 60 mass% NaNO3 and 40 mass% KNO3) is practically the only media for thermal energy storage (TES) in concentrated...     

Volatile Compounds of Lemon and Grapefruit IntegroPectin

An HS-SPME GC-MS analysis of the volatile compounds adsorbed at the outer surface of lemon and grapefruit pectins obtained via the hydrodynamic cavitation of industrial waste streams of lemon and grapefruit peels in water suggests important new findings en route to understanding the powerful and broad biological activity of these new pectic materials. In agreement with the ultralow degree of esterification of these pectins, the high amount of highly bioactive α-terpineol and terpinen-4-ol points to limonene (and linalool) decomposition catalyzed by residual citric acid in the citrus waste peel residue of the juice industrial production.     

Switching-On Fluorescence by Copper (II) and Basic Anions: A Case Study with a Pyrene-Functionalized Squaramide

The new symmetric acyclic N,N’-bis(1-pyrenyl) squaramide (H₂L) functionalized with the pyrene moiety as a fluorogenic fragment has been designed and its ability to selectively detect specific anions and metals investigated. H₂L selectively binds Cl⁻ both in solution (DMSO 0.5% H₂O and MeCN) and in the solid state, and allows to selectively detect Cu²⁺ in MeCN with the formation of a 2:1 metal-receptor complex, with a green intense emission appreciable by naked eye under the UV lamp. The H₂L copper complex preserves its emission properties in the presence of Cl⁻. The addition of basic anions (OH⁻, CN⁻, and F⁻) up to 10 equivalents caused the deprotonation of the squaramide NHs and a dramatic change of the emission properties of the H₂L copper complex.     

Modulation of the Biocatalytic Properties of a Novel Lipase from Psychrophilic Serratia sp. (USBA-GBX-513) by Different Immobilization Strategies

In this work, the effect of different immobilization procedures on the properties of a lipase obtained from the extremophilic microorganism Serratia sp. USBA-GBX-513, which was isolated from Paramo soils of Los Nevados National Natural Park (Colombia), is reported. Different Shepharose beads were used: octyl-(OC), octyl-glyoxyl-(OC-GLX), cyanogen bromide (BrCN)-, and Q-Sepharose. The performance of the different immobilized extremophile lipase from Serratia (ESL) was compared with that of the lipase B from Candida antarctica (CALB). In all immobilization tests, hyperactivation of ESL was observed. The highest hyperactivation (10.3) was obtained by immobilization on the OC support. Subsequently, the thermal stability at pH 5, 7, and 9 and the stability in the presence of 50% (v/v) acetonitrile, 50% dioxane, and 50% tetrahydrofuran solvents at pH 7 and 40 °C were evaluated. ESL immobilized on octyl-Sepharose was the most stable biocatalyst at 90 °C and pH 9, while the most stable preparation at pH 5 was ESL immobilized on OC-GLX-Sepharose supports. Finally, in the presence of 50% (v/v) tetrahydrofuran (THF) or dioxane at 40 °C, ESL immobilized on OC-Sepharose was the most stable biocatalyst, while the immobilized preparation of ESL on Q-Sepharose was the most stable one in 40% (v/v) acetonitrile.     

Chemical Characterization of Plant Extracts and Evaluation of their Nematicidal and Phytotoxic Potential

Nacobbus aberrans ranks among the “top ten” plant-parasitic nematodes of phytosanitary importance. It causes significant losses in commercial interest crops in America and is a potential risk in the European Union. The nematicidal and phytotoxic activities of seven plant extracts against N. aberrans and Solanum lycopersicum were evaluated in vitro, respectively. The chemical nature of three nematicidal extracts (EC_50,48h ≤ 113 µg mL⁻¹) was studied through NMR analysis. Plant extracts showed nematicidal activity on second-stage juveniles (J2): (≥87%) at 1000 µg mL⁻¹ after 72 h, and their EC₅₀ values were 71.4–468.1 and 31.5–299.8 µg mL⁻¹ after 24 and 48 h, respectively. Extracts with the best nematicidal potential (EC_50,48h < 113 µg mL⁻¹) were those from Adenophyllum aurantium, Alloispermum integrifolium, and Tournefortia densiflora, which inhibited L. esculentum seed growth by 100% at 20 µg mL⁻¹. Stigmasterol (1), β-sitosterol (2), and α-terthienyl (3) were identified from A. aurantium, while 1, 2, lutein (4), centaurin (5), patuletin-7-β-O-glucoside (6), pendulin (7), and penduletin (8) were identified from A. integrifolium. From T. densiflora extract, allantoin (9), 9-O-angeloyl-retronecine (10), and its N-oxide (11) were identified. The present research is the first to report the effect of T. densiflora, A. integrifolium, and A. aurantium against N. aberrans and chemically characterized nematicidal extracts that may provide alternative sources of botanical nematicides.     

Effect of the Addition of Alginate and/or Tetracycline on Brushite Cement Properties

Calcium phosphate cements have the advantage that they can be prepared as a paste that sets in a few minutes and can be easily adapted to the shape of the bone defect, which facilitates its clinical application. In this research, six formulations of brushite (dicalcium phosphate dihydrated) cement were obtained and the effect of the addition of sodium alginate was analyzed, such as its capacity as a tetracycline release system. The samples that contain sodium alginate set in 4 or 5 min and showed a high percentage of injectability (93%). The cements exhibit compression resistance values between 1.6 and 2.6 MPa. The drug was released in a range between 12.6 and 13.2% after 7 days. The antimicrobial activity of all the cements containing antibiotics was proven. All samples reached values of cell viability above 70 percent. We also observed that the addition of the sodium alginate and tetracycline improved the cell viability.     

Simultaneous Electrochemical Determination of Paracetamol and Allura Red in Pharmaceutical Doses and Food Using a Mo(VI) Oxide-Carbon Paste Microcomposite

This work presents a new application for MoO₃ combined with carbon paste to prepare a microcomposite electrode (Mo(VI)_Ox/CPE) for the simultaneous determination of paracetamol (PCM) and Allure Red (AR) by square-wave voltammetry (SWV). The anodic peak currents for PCM and AR were 70.0 and 80.0 % high compared with an unmodified carbon paste electrode. The surface areas of Mo(VI)_Ox/CPE and CPE were evaluated by cyclic voltammetry. The detection limit were 0.14 and 0.38 μmol/L for PCM and AR respectively. The relative standard deviations (RSDs) were 2.0 % (n=7). Stability, shelf life and possible interferences were also evaluated with very acceptable results.