Dinuclear and heteropolynuclear complexes containing Mo2(4+) units

The quadruply bonded compound Mo2(DpyF)4 (1), where DpyF- is the anion of N,N'-di(2-pyridyl)formamidine, has been prepared by ligand substitution reactions of Mo2(OOCCF3)4 and either the neutral ligand, HDpyF, at ambient temperature or its lithium salt, LiDpyF, under refluxing conditions. An X-ray structural analysis shows that 1 has a paddlewheel structure with a [symbol: see text] distance of 2.1108(6) A. Reaction of 1 with CoCl2 in methanol produces the paramagnetic compound [Mo2Co(DpyF)4][CoCl4].2MeOH (2). The Co(II) atom in the cation [Mo2Co(DpyF)4]2+ resides on a low-spin hexacoordinate environment (S = 1/2) with a Co...Mo separation of 2.979(6) A, suggesting there is no direct bonding interaction between the Co and Mo atoms. The Mo-Mo distance of 2.1096(5) A is similar to that in 1. Reaction of 1 and CuCl in methanol yields [Mo2Cu4(DpyF)4Cl2][CuCl2]2.2MeOHxEt2O (3). In the cation there are two copper atoms on each side of the Mo2 core. Each is coordinated to two pyridyl nitrogen atoms of the cis DpyF- ligands and loosely bridged to the other by a chloride ion. As a result, the Cu(I) atoms are not aligned with the Mo2 unit. The Cu to Mo separations are in the range 3.003(1)-3.015(1) A, and the Mo-Mo distance of 2.127(1) A is comparable to those in 1 and 2.     

Voltammetric determination of L-dopa using an electrode modified with trinuclear ruthenium ammine complex (Ru-red) supported on Y-type zeolite

The L-dopa is the immediate precursor of the neurotransmitter dopamine. Unlike dopamine, L-dopa easily enters the central nervous system and is used in the treatment of Parkinson’s disease. A sensitive and selective method is presented for the voltammetric determination of L-dopa in pharmaceutical formulations using a carbon paste electrode modified with trinuclear ruthenium ammine complex [(NH₃)₅Ru^IIIORu^IV(NH₃)₄ORu^III(NH₃)₅]⁶⁺ (Ru-red) incorporated in NaY zeolite. The parameters which influence on the electrode response (paste composition, potential scan rate, pH and interference) were also investigated. The optimum conditions were found to an electrode composition (m/m) of 25% zeolite containing 6.7% Ru, 50% graphite and 25% mineral oil in acetate buffer at pH 4.8. Voltammetric peak currents showed a linear response for L-dopa concentration in the range between 1.2×10⁻⁴ and 1.0×10⁻² mol l⁻¹ (r=0.9988) with a detection limit of 8.5×10⁻⁵ mol l⁻¹. The variation coefficient for a 1.0×10⁻³ mol l⁻¹ L-dopa (n=10) was 5.5%. The results obtained for L-dopa in pharmaceutical formulations (tablet) was in agreement with compared official method. In conclusion, this study has illustrated that the proposed electrode modified with Ru-red incorporated zeolite is suitable valuable for selective measurements of L-dopa.     

Linear NiII-MnIII2-NiII tetramers: an oligomeric component of the MnIII2NiII single-chain magnets

Heterometallic linear tetramers [Mn(5-R-saltmen)Ni(pao)(bpy)(2)](2)(ClO(4))(4) (5-R-saltmen(2-) = N,N'-1,1,2,2-tetramethylethylene bis(5-R-salicylideneiminate); pao(-) = pyridine-2-aldoximate; bpy = 2,2'-bipyridine, R = H, 1; Cl, 2; Br, 3; MeO, 4) have been synthesized and structurally characterized. These compounds exhibit a [Ni(II)-NO-Mn(III)-(O)(2)-Mn(III)-ON-Ni(II)] skeleton where -ON- is an oximate bridge between Mn(III) and Ni(II) ions and -(O)(2)- is a bi-phenolate bridge between Mn(III) ions. These tetramers can be seen as oligomeric units of the heterometallic Mn(III)(2)-Ni(II) chain observed in a family of single-chain magnets (Clérac, R.; Miyasaka, H.; Yamashita, M.; Coulon, C. J. Am. Chem. Soc. 2002, 124, 12837. Miyasaka, H.; Clérac, R.; Mizushima, K.; Sugiura, K.; Yamashita, M.; Wernsdorfer, W.; Coulon, C. Inorg. Chem. 2003, 42, 8203.). Magnetic measurements on these tetramers confirm the nature of the magnetic interactions reported for the Mn(III)(2)-Ni(II) chains: a strong antiferromagnetic Mn(III)/Ni(II) coupling via the oximate bridge (J(Ni-Mn) ranges from -23.7 to -26.1 K) and a weak ferromagnetic Mn(III)/Mn(III) coupling through the bi-phenolate bridge (J(Mn-Mn) ranges from +0.4 to +0.9 K). These magnetic interactions lead to tetramers with an S = 2 ground state.     

MnIII2 (5-Rsaltmen)2NiII(pao)2(L)]2+: an S(T)=3 building block for a single-chain magnet that behaves as a single-molecule magnet

Mn(III)-Ni(II)-Mn(III) linear-type trinuclear complexes bridged by oximate groups were selectively synthesized by the assembly reaction of [Mn2(5-Rsaltmen)2(H2O)2](ClO4)2 (5-Rsaltmen2-=N,N'-(1,1,2,2-tetramethylethylene) bis(5-R-salicylideneiminate); R=Cl, Br) with [Ni(pao)2(phen)] (pao-=pyridine-2-aldoximate; phen=1,10-phenanthroline) in methanol/water: [Mn2(5-Rsaltmen)2Ni(pao)2(phen)](ClO4)2 (R=Cl, 1; R=Br, 2). Structural analysis revealed that the [Mn(III)-ON-Ni(II)-NO-Mn(III)] skeleton of these trimers is in every respect similar to the repeating unit found in the previously reported series of 1D materials [Mn2(saltmen)2Ni(pao)2(L1)2](A)(2) (L(1)=pyridine, 4-picoline, 4-tert-butylpyridine, N-methylimidazole; A=ClO4-, BF4-, PF6-, ReO4-). Recently, these 1D compounds have attracted a great deal of attention for their magnetic properties, since they exhibit slow relaxation of the magnetization (also called single-chain magnet (SCM) behavior). This unique magnetic behavior was explained in the framework of Glauber's theory, generalized for chains of ferromagnetically coupled anisotropic spins. Thus, in these 1D compounds, the [Mn(III)-ON-Ni(II)-NO-Mn(III)] unit was considered as an S(T)=3 anisotropic spin. Direct-current magnetic measurements on 1 and 2 confirm their S(T)=3 ground state and strong uniaxial anisotropy (D/k(B) approximately -2.4 K), in excellent agreement with the magnetic characteristic deduced in the study on the SCM series. The ac magnetic susceptibility of these trimers is strongly frequency-dependent and characteristic of single-molecule magnet (SMM) behavior. The relaxation time tau shows a thermally activated (Arrhenius) behavior with tau0 approximately 1x10(-7) s and Delta(eff)/k(B) approximately 18 K. The effective energy barrier for reversal of the magnetization Delta(eff) is consistent with the theoretical value (21 K) estimated from |D| S2T. The present results reinforce consistently the interpretation of the SCM behavior observed in the [Mn2(saltmen)2Ni(pao)2(L1)2](A)2 series and opens new perspectives to design single-chain magnets.     

A novel octanuclear Mn(III) aggregate as a single-molecule magnet

The novel octanuclear cluster [Mn8O2(OH)2(OMe)12(OAc)2(Mesalim)4] (1) presents SMM behaviour with a relatively high experimental energy barrier (eff/kB= 36.0 K) as shown by its dc and ac magnetic properties.     

First investigation of non-classical dihydrogen bonding between an early transition-metal hydride and alcohols: IR, NMR, and DFT approach

The interaction of [NbCp(2)H(3)] with fluorinated alcohols to give dihydrogen-bonded complexes was studied by a combination of IR, NMR and DFT methods. IR spectra were examined in the range from 200-295 K, affording a clear picture of dihydrogen-bond formation when [NbCp(2)H(3)]/HOR(f) mixtures (HOR(f) = hexafluoroisopropanol (HFIP) or perfluoro-tert-butanol (PFTB)) were quickly cooled to 200 K. Through examination of the OH region, the dihydrogen-bond energetics were determined to be 4.5+/-0.3 kcal mol(-1) for TFE (TFE = trifluoroethanol) and 5.7+/-0.3 kcal mol(-1) for HFIP. (1)H NMR studies of solutions of [NbCp(2)H(2)(B)H(A)] and HFIP in [D(8)]toluene revealed high-field shifts of the hydrides H(A) and H(B), characteristic of dihydrogen-bond formation, upon addition of alcohol. The magnitude of signal shifts and T(1) relaxation time measurements show preferential coordination of the alcohol to the central hydride H(A), but are also consistent with a bifurcated character of the dihydrogen bonding. Estimations of hydride-proton distances based on T(1) data are in good accord with the results of DFT calculations. DFT calculations for the interaction of [NbCp(2)H(3)] with a series of non-fluorinated (MeOH, CH(3)COOH) and fluorinated (CF(3)OH, TFE, HFIP, PFTB and CF(3)COOH) proton donors of different strengths showed dihydrogen-bond formation, with binding energies ranging from -5.7 to -12.3 kcal mol(-1), depending on the proton donor strength. Coordination of proton donors occurs both to the central and to the lateral hydrides of [NbCp(2)H(3)], the former interaction being of bifurcated type and energetically slightly more favourable. In the case of the strong acid H(3)O(+), the proton transfer occurs without any barrier, and no dihydrogen-bonded intermediates are found. Proton transfer to [NbCp(2)H(3)] gives bis(dihydrogen) [NbCp(2)(eta(2)-H(2))(2)](+) and dihydride(dihydrogen) complexes [NbCp(2)(H)(2)(eta(2)-H(2))](+) (with lateral hydrides and central dihydrogen), the former product being slightly more stable. When two molecules of TFA were included in the calculations, in addition to the dihydrogen-bonded adduct, an ionic pair formed by the cationic bis(dihydrogen) complex [NbCp(2)(eta(2)-H(2))(2)](+) and the homoconjugated anion pair (CF(3)COO...H...OOCCF(3))(-) was found as a minimum. It is very likely that these ionic pairs may be intermediates in the H/D exchange between the hydride ligands and the OD group observed with the more acidic alcohols in the NMR studies.     

Emploi des thiocarbohydrazones en analyse organique fonctionelle

Résumé Le thiocarbohydrazide est un réactif d'accès facile précipitant quantitativement les aldéhydes et quelques cétones. Les points de fusion sont nets. Les précipités formés se prêtent à la gravimétrie. Nous avons étudié avec la thermobalance leur domaine de stabilité et fourni la température à ne pas dépasser pour le séchage à poids constant.

---

Summary Thiocarbohydrazide is a readily available reagent which quantitatively precipitates aldehydes and some ketones. The melting points are sharp. The resulting precipitates are suitable for gravimetry. Their regions of stability have been investigated with the thermobalance and the temperatures which should not be exceeded in drying to a constant weight have been found.

---

Zusammenfassung Thiocarbohydrazid ist ein leicht zugängliches Reagens zur quantitativen Fällung der Aldehyde und mancher Ketone. Die Schmelzpunkte der Niederschläge sind scharf. Diese eignen sich zur gravimetrischen Auswertung. Ihre Stabilität wurde mit Hilfe der Thermowaage untersucht und die Höchsttemperaturen für ihre Trocknung bis zur Gewichtskonstanz bestimmt.

     

Conformational analysis of trans-2,3-diaryloxy-1,4-dioxanes. A tool for discriminating between steric and electronic effects in the position of

The conformation of several $\text{trans}$-2,3-diaryloxy-1,4-dioxanes has been studied using ¹H NMR techniques. $\text{Trans}$-2,3-bis(4-nitrophenoxy)-1,4-dioxane and $\text{trans}$-2,3-bis(4-methoxyphenoxy)-1,4-dioxane have been found to be predominantly ( ≈98%) in diaxial conformation in CDCl₃). On the other hand, $\text{trans}$-2,3-bis(2,6-dimethylphenoxy)-1,4-dioxane exists in the same conditions as a 66:33 mixture of diaxial and diequatorial conformers. An explanation based on the fulfilment of the exo-anomeric effect is provided.