Ag偏离化学计量比Ag1-xPb18SbTe20材料的热电传输性能

采用熔融-淬火-放电等离子体烧结制备了Ag偏离化学计量比Ag1-xPb18SbTe20(x=0,0.25,0.50,0.75)样品,研究了Ag含量对样品热电传输性能的影响.结果表明,随Ag含量降低,样品中出现少量第二相Sb2Te3,样品载流子浓度增加到5×1018cm-3后不再增加.样品载流子迁移率随Ag含量降低先降低后增加,随着温度增加,载流子散射机理由电离杂质散射转变为声学波散射.随Ag含量降低,样品电导率增加而Seebeck系数降低,热导率增加.     

Synthesis and fluorescence study of sodium-2-(4′-dimethyl-aminocinnamicacyl)-3,3-(1′,3′-alkylenedithio) acrylate

We synthesized two new compounds: Sodium 2-(4′-dimethyl-aminocinnamicacyl)-3,3-(1′,3′- ethyl- enedithio) acrylate (STAA-1) and Sodium 2-(4′-dimethyl-aminocinnamicacyl)-3, 3-(1′,3′-propylenedithio) acrylate (STAA-2). The maximum absorption of these compounds ranges from 460 to 520 nm with different molecular structures in different solvents. Meanwhile, the emission peak of these compounds arranges from yellow (510 nm) to red (605 nm). The emission spectra show red shift according to the strength of the hydrogen bonding property of the solvent. But the absorption spectra do not show clearly relationship with the strength of the hydrogen bonding property of the solvent. The Stoke shift of the compounds ranges from 42 to 102 nm. It changes in the following order, EtOH>H₂O>DMF, and STAA-1>STAA-2 in the same solvent. The fluorescent quantum yield of STAA-1 was measured to be 7.12% with quinine sulphate as the standard compound in ethanol. Furthermore, the relationship of the fluorescence of STAA-1 with pH (ranges form 4 to 14) in water (c=∼10⁻⁴) was studied to make sure that these compounds could be used as proton sensors.     

A facile pathway for the fast synthesis of colloidal crystal‐loaded hydrogels via frontal polymerization

In this work, a dually sensitive colloidal crystal (CC)‐loaded hydrogel has been synthesized via frontal polymerization (FP) in a facile and rapid way. First, a polystyrene CC film was fabricated by vertical deposition on the inner wall of a test tube. Then, a mixture of acrylic acid (AAc), 2‐hydroxyethyl methacrylate (HEMA), and glycerol along with the initiator and crosslinker was added to this test tube to carry out FP, resulting in the formation of CC‐loaded hydrogel. The influence of the mass ratios of HEMA/AAc on front velocity and temperatures were studied. The swelling behavior, the morphology, and the stimuli‐responsive behavior of the CC‐loaded hydrogels prepared via FP were thoroughly investigated on the basis of swelling measurement, scanning electron microscopy, and reflection spectra. Results show that the as‐prepared CC‐loaded hydrogels exhibit excellent dual sensitivity to both methanol concentrations and pH values with very short response time, which can be observed visually without the aid of instruments. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Single electron transfer‐living radical polymerization of methyl methacrylate catalyzed by ytterbium powder

Zerovalent ytterbium (Yb) powder is firstly used as a catalyst in single electron transfer‐living radical polymerization of methyl methacrylate initiated by carbon tetrachloride in N, N‐dimethylformamide (DMF) and dimethyl sulfoxide, respectively. Polymerization proceeds in a “living”/controlled way as evidenced by kinetic studies and chain extension results, producing well‐defined polymers with controlled degree of polymerization and narrow molecular weight distribution. The apparent activation energy of polymerization in DMF is accounted to be 36.2 kJ/mol, and the energy of equilibrium state is calculated to be 13.9 kJ/mol. An increase in the concentration of Yb(0) yields a higher monomer conversion. It is observed that polymerization rate experiments a rapid increase in the presence of more polar solvent water, and increasing in the content of H₂O results in an increase in the apparent rate constant of polymerization, and a decrease in the molecular weight distribution. The reaction rate and molecular weight increase along with the decrease of DMF content. The effect of Yb(0) powder content, different ligands and concentration of initiator on the polymerization is also investigated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

二安替比林对甲氧基苯基甲烷与锰(Ⅳ)的高选择性显色反应研究及应用

在碱性介质中，空气氧化Ｍｎ（Ⅱ）为Ｍｎ（Ⅳ），然后在酸性介质中，Ｍｎ（Ⅳ）氧化二安替比林对甲氧基苯基甲烷（ＤＡｐＭＭ）生成黄色产物，λｍａｘ＝４５０ｎｍ，ε＝５．４５×１０４Ｌ·ｍｏｌ－１·ｃｍ－１。锰含量在０～２０μｇ／２５ｍＬ内符合比尔定律。方法用于钢样中锰的测定，结果满意     

Erratum to: Tensionless contact of a finite circular plate

In the electronic version of the original article, the issue number shown in the header of the article opening page was wrong. It should be Issue 5 as in Acta Mechanica Sinica (2012) 28(5): 1374-1381.     

Polyvinylidene fluoride/polystyrene hybrid fibers with high ionic conductivity and enhanced mechanical strength as lithium-ion battery separators

Journal of Solid State Electrochemistry - Ionic conductivity is an important separator parameter influencing the cycle life and rate capability of lithium-ion batteries (LIBs). To improve the ionic...     

Photopromoted carbonylation of 1-bromo-6-chlorohexane under ambient conditions

Photopromoted carbonylation of 1-bromo-6-chlorohexane with CO catalyzed by CuBr2 and CdI2 has been carried out under ambient conditions. The results indicate that the carbonylation proceeds with the major product of chloroester ClCH2（CH2）5COOCH3 under catalysis of CuBr2. Furthermore, the activity of the carbonylation can be improved by addition of basic additives （NaOAc, Na3PO4 or （n-C4H9）3N）. Among these additives, （n-C4H9）3N is the most efficient in terms of the yield of ClCH2（CH2）5COOCH3. However, the methoxycarbonyl substituting chlorine product of BrCH2（CH2）5COOCH3 is not obtained in the presence of CdI2. This is quite different from the carbonylation of monochloroalkane.