Improvement of the Water Resistance of a Narrow‐Band Red‐Emitting SrLiAl3N4:Eu2+ Phosphor Synthesized under High Isostatic Pressure through Coating with an Organosilica Layer

A SrLiAl₃N₄:Eu²⁺ (SLA) red phosphor prepared through a high‐pressure solid‐state reaction was coated with an organosilica layer with a thickness of 400–600 nm to improve its water resistance. The observed 4f⁶5d→4f⁷ transition bands are thought to result from the existence of Eu²⁺ at two different Sr²⁺ sites. Luminescence spectra at 10 K revealed two zero‐phonon lines at 15377 (for Eu(Sr1)) and 15780 cm^?1 (for Eu(Sr2)). The phosphor exhibited stable red emission under high pressure up to 312 kbar. The configurational coordinate diagram gave a theoretical explanation for the Eu^2+/3+ result. The coated samples showed excellent moisture resistance while retaining an external quantum efficiency (EQE) of 70 % of their initial EQE after aging for 5 days under harsh conditions. White‐light‐emitting diodes of the SLA red phosphor and a commercial Y₃Al₅O₁₂:Ce³⁺ yellow phosphor on a blue InGaN chip showed high color rendition (CRI=89, R9=69) and a low correlated color temperature of 2406 K.     

Comprehensive 1H and 13C NMR assignment of 13 protobassic acid saponins

This study aimed to carry out complete ¹H and ¹³C NMR assignment of 13 protobassic acid saponins, including arganins A–C ( 1 – 3 ) and F ( 4 ), butyrosides B–D ( 5 – 7 ), tieghemelin ( 8 ), 3′-O-glucosyl-arganin C ( 9 ), Mi-saponins A–C ( 10 – 12 ), and mimusopsin ( 13 ), recorded in methanol-d₄. This was accomplished by the analysis of high-resolution one-dimensional (1D) NMR (¹H and ¹³C), two-dimensional (2D) NMR (¹H–¹H COSY, HSQC, and HMBC), and selectively excited 1D TOCSY spectra. Before this study, ¹H and ¹³C NMR data of arganins A–C ( 1 – 3 ) and F ( 4 ) were partially assigned. Our effort leads to their complete assignment, especially the glycon residue, and revises some reported data. Some revisions of the ¹H and ¹³C NMR data in the glycon part of butyroside C ( 6 ), tieghemelin ( 8 ), Mi-saponin A ( 10 ), and mimusopsin ( 13 ) were made. Those data of butyrosides B and D ( 5 & 7 ) and Mi-saponin B ( 11 ), which had not been recorded in methanol-d₄, are provided. In addition, the ¹H and ¹³C NMR data of Mi-saponin C ( 12 ) are reported for the first time. These data, being recorded in methanol-d₄, should be more friendly for use as a reference for identifying the related triterpenoid saponins.     

Using cone calorimeter data for the prediction of upward flame spread rate

In a cone calorimeter, the specimen receives uniformly distributed irradiance from the cone heater. Producing a heating environment simulating the heating intensity in real fires, this apparatus consequently is capable of providing information of materials relevant to their fire performance. Several previous upward flame spread models utilized the data as input with an assumption of uniformly distributed heat fluxes. Satisfactory flame spread rates were predicted. However, the heat flux in the heating region in upward flame spread is not uniform. This study introduces an alternative protocol of the cone calorimeter and a sample holder by which the following differences were made, including specimen turned 42° before ignition, lower ignition source before ignition, heater removed after ignition, and specimen moved back to vertical orientation after ignition. The heating environment is more consistent to real wall fire conditions. In addition, the prediction of flame spread rate using the alternative test protocol is closer to the measured flame spread rate than standard test methods.     

Energy transfer of highly vibrationally excited phenanthrene and diphenylacetylene

The energy transfer between Kr atoms and highly vibrationally excited, rotationally cold phenanthrene and diphenylacetylene in the triplet state was investigated using crossed-beam/time-of-flight mass spectrometer/time-sliced velocity map ion imaging techniques. Compared to the energy transfer between naphthalene and Kr, energy transfer between phenanthrene and Kr shows a larger cross-section for vibrational to translational (V → T) energy transfer, a smaller cross-section for translational to vibrational and rotational (T → VR) energy transfer, and more energy transferred from vibration to translation. These differences are further enlarged in the comparison between naphthalene and diphenylacetylene. In addition, less complex formation and significant increases in the large V → T energy transfer probabilities, termed supercollisions in diphenylacetylene and Kr collisions were observed. The differences in the energy transfer between these highly vibrationally excited molecules are attributed to the low-frequency vibrational modes, especially those vibrations with rotation-like wide-angle motions.     

Biosynthesis of Streptolidine Involved Two Unexpected Intermediates Produced by a Dihydroxylase and a Cyclase through Unusual Mechanisms

Streptothricin‐F (STT‐F), one of the early‐discovered antibiotics, consists of three components, a β‐lysine homopolymer, an aminosugar D ‐gulosamine, and an unusual bicyclic streptolidine. The biosynthesis of streptolidine is a long‐lasting but unresolved puzzle. Herein, a combination of genetic/biochemical/structural approaches was used to unravel this problem. The STT gene cluster was first sequenced from a Streptomyces variant BCRC 12163, wherein two gene products OrfP and OrfR were characterized in vitro to be a dihydroxylase and a cyclase, respectively. Thirteen high‐resolution crystal structures for both enzymes in different reaction intermediate states were snapshotted to help elucidate their catalytic mechanisms. OrfP catalyzes an Fe^II‐dependent double hydroxylation reaction converting L ‐Arg into (3R,4R)‐(OH)₂‐L ‐Arg via (3S)‐OH‐L ‐Arg, while OrfR catalyzes an unusual PLP‐dependent elimination/addition reaction cyclizing (3R,4R)‐(OH)₂‐L ‐Arg to the six‐membered (4R)‐OH‐capreomycidine. The biosynthetic mystery finally comes to light as the latter product was incorporation into STT‐F by a feeding experiment.     

Vapor‐Phase Reaction of Citronellal over Mesoporous Molecular Sieves MCM‐41 and Zeolites

The vapor‐phase reaction of citronellal (CTN) at 220 °C and atmospheric pressure has been studied using mesoporous molecular sieves and zeolites in a fixed‐bed reactor. The primary products included isopulegol (IPG), menthone, and pulegol with subsequent reactions to form cyclic hydrocarbons. The CTN conversion and the product selectivity depend on the acidity and the textural property of catalysts. Lewis and/or Brönsted acid sites are essential for catalyzing this reaction. An increase of SiO₂/Al₂O₃ mol ratio diminishes the acid amount of all catalysts and enhances both the surface area and the structural order of MCM‐41. The catalytic activity follows the order of MCM‐41 > HZSM‐5 > Hβ > USY, in accordance with the relative total acid amount except that of MCM‐41. Despite its low acidity, Si‐MCM‐41 exhibits the best catalytic performance due to its uniform mesopores, large surface area and good stability; the CTN conversion and the IPG yield attain 91.9% and 58.6%, respectively, after at least 25 h time‐on‐stream.     

Difference in Conversions Between Dimethyl Sulfide and Methanethiol in a Cold Plasma Environment

This study compared the conversion of two malodorous substances, dimethyl sulfide (CH₃SCH₃, DMS) and methanethiol (CH₃SH) in a cold plasma reactor. The DMS and CH₃SH were successfully destroyed at room temperature. DMS decomposed less than CH₃SH at the same conditions. In oxygen-free condition, CS₂ and hydrocarbons were the major products, while SO₂ and CO_x were main compounds in oxygen-rich environments. The DMS/Ar plasma yielded more hydrocarbons and less CS₂ than that of CH₃SH/Ar plasma. In the CH₃SH/O₂/Ar plasma, rapid formation of SO and CO resulted in the yields much more amounts of SO₂ and CO₂ than those in the DMS/O₂/Ar plasma; and remained only a trace of total hydrocarbons, CH₂O, CH₃OH, CS₂, and OCS. The major differences between the reaction mechanisms of DMS and CH₃SH were also proposed and discussed.     

Effect of particle size of activated clay on the adsorption of paraquat from aqueous solution

This paper describes the effect of particle size on the process of paraquat adsorption from aqueous solution onto an activated clay surface at 25 degrees C and initial pH 11.0. Measurements of the pore properties of the clay adsorbents with three different particle sizes (0.053-0.074 mm, 0.037-0.053 mm, and <0.037 mm) were carried out. The rates and isotherms of adsorption have been also investigated by batch methods under the controlled conditions. From the experimental results obtained, the adsorption process can be well described with the pseudo-second order model and Freundlich model for adsorption kinetics and adsorption isotherm, respectively. In addition, the effect of the particle size of the clay adsorbent on the adsorption kinetics was found to be of considerable significance; namely, the rate constant (k) of paraquat adsorption by the clay adsorbent decreased with increasing particle size. It was concluded that the pore properties (i.e., surface area and total pore volume) and particle size of the clay adsorbent played a significant role in determining adsorption capacity and adsorption rate, respectively.     

Synthesis,photophysical and electrochemical studies of di-2-pyridyl ketone complexes of rhodium(III)

Complexes of rhodium(III) with di-2-pyridyl ketone (dpk), Rh(dpk)(MeCN)Cl₃ (1) and cis-[Rh(dpk)₂Cl₂]⁺ (2), have been successfully prepared and characterized. At low temperature (77 K), complex (2) in EtOH/MeOH (4:1, v/v) shows a broad, symmetric and structureless red emission with a microsecond lifetime and, hence, is assigned as the dd* phosphorescence. Electrochemical data, including cyclic voltammetry, normal pulse voltammetry, triple pulse voltammetry and controlled potential electrolysis, have been obtained for the two dpk complexes of rhodium(III) in MeCN. On the basis of analysis of the electrochemical (1,2) and luminescence data (2), electron transfer mechanisms are proposed. For complex (1), two reduction processes occur at the metal-localized orbitals with elimination of chlorides during the first reduction step. This is followed by a one-electron reduction at the metal. For complex (2), three electrons are transferred to the metal in two successive reduction steps accompanied by elimination of two chlorides. After these two reduction steps another one-electron reduction occurs at the dpk ligand.     

Ag8Cl2[Se2P(OEt)2]6: A rare example containing a combination of discrete clusters and chains

The novel halide-centered Ag(I)8 cubic clusters containing diethyl diselenophosphato ligands are prepared and their solid state structures, a discrete unit or a one-dimensional chain, are dictated by the counter anions.