50W功率放大器的研制

介绍了一种L波段50W功率放大器的研制情况,采用功率合成技术获得了61W的输出功率,放大器增益大于40dB。给出了1W功放、10W功放和八路功率分配器的设计分析过程。     

Efficient passively Q-switched laser operation of Yb in the disordered NaGd(WO4)2 crystal host

Efficient passively Q-switched laser operation of the disordered Yb:NaGd(WO(4))(2) crystal is demonstrated for the first time to our knowledge with a Cr(4+):YAG saturable absorber by diode end pumping. 2.05 W of average output power at a pulse repetition frequency of 13.3 kHz was obtained at an absorbed pump power of 7.7 W, with a slope efficiency of 40%. The energy and duration of the generated laser pulse were 154 microJ and 33 ns, respectively, corresponding to a peak power of 4.67 kW. In continuous-wave operation, the Yb:NaGd(WO(4))(2) laser yielded an output power of 5.5 W with an optical-optical efficiency of 51%.     

Formation of subwavelength periodic structures on tungsten induced by ultrashort laser pulses

The evolution of surface morphology of tungsten irradiated by single-beam femtosecond laser pulses is investigated. Ripplelike periodic structures have been observed. The period of these ripples does not show a simple relation to the wavelength and angle of incidence. The orientation of ripples is aligned perpendicularly to the direction of polarization for linearly polarized light. Surprisingly, we find that the alignment of the ripple structure turned left or right by 45 degrees with respect to the incident plane when using right and left circularly polarized light, respectively. The period of the ripple can be controlled by the pulse energy, the number of pulses, and the incident angle. We find a clear threshold for the formation as a function of pulse energy and number of pulses. The mechanism for the ripple formation is discussed, as well as potential applications in large-area structuring of metals.     

Improved rejection of multiply scattered photons in confocal microscopy using dual-axes architecture

We perform Monte Carlo simulations to show that the dual-axes (DA) confocal architecture has superior rejection of multiply scattered photons in tissue to that of single axis. As a result, the DA configuration provides improved signal-to-noise ratio and dynamic range, and thus is sensitive to ballistic photons from deeper within tissue, features that are particularly useful for performing vertical cross-sectional reflectance images in tissue.     

Study on optical gain of one-dimensional photonic crystals with active impurity

Localized fields in the defect mode of one-dimensional photonic crystals with active impurity are studied with the help of the theory of spontaneous emission from two-level atoms embedded in photonic crystals.Numerical simulations demonstrate that the enhancement of stimulated radiation, as well as the phenomena of transmissivity larger than unity and the abnormality of group velocity close to the edges of photonic band gap, are related to the negative imaginary part of the complex effective refractive index of doped layers. This means that the complex effective refractive index has a negative imaginary part, and that the impurity state with very high quality factor and great state density will occur in the photonic forbidden band if active impurity is introduced into the defect layer properly. Therefore, the spontaneous emission can be enhanced, the amplitude of stimulated emission will be very large and it occurs most probably close to the edges of photonic band gap with the fundamental reason, the group velocity close to the edges of band gap is very small or abnormal.     

Explicit solutions of Boussinesq--Burgers equation

Darboux transformation with multi-parameters for the Boussinesq--Burgers (B--B) equation is derived. For an application, some important explicit solutions of the B--B equation are obtained, including 2N-soliton solution and periodic solution. Finally, some elegant and interesting figures are plotted.     

The pertinence of expression of heat shock proteins (HSPs) to the efficacy of cryopreservation in HELAs

HELAs (Hela cells, passed cells of human cervical carcinoma) were heat or cold treated (named heat or cold shock) and then resumed normal culture for 2, 4 or 8 hours respectively. The expressions of heat shock protein 70 (HSP70) and 90 (HSP90) of the HELAs were measured by Northern and Western blotting. HELAs after 4-hour culture were exposed to or cryopreserved with different concentration of dimethyl sulfoxide (Me2SO, 2.5%, 5%, 10%, 15% and 20% respectively, V/V). Meanwhile, the HELAs after different culture time (2, 4 and 6 hours of culture) were cryopreserved with 5% Me2SO. After exposure or cryopreservation, the number of live HELAs was counted and the survival rate was calculated. The results showed that heat shock increased the expression of HSP70 and HSP90 of HELAs, while cold shock decreased the expression of the two proteins. When the concentrations of Me2SO were 10%, 15% and 20%, the survival rates of HELAs after exposure to Me2SO or cryopreservation were much lower than those when the concentrations were small. The survival rates of the heat shocked HELAs were significantly higher than those of the cold shocked and control HELAs. After cryopreservation with 5% Me2SO, the survival rate of heat shocked HELAs group with 2 hours culture time was the lowest among all the groups of HELAs with different cultural time. From the results of this study, we conclude that the expressions of HSP70 and HSP90 in HELAs increased significantly after heat shock, while cold shock decreased the expressions of these two proteins. The over-expressions of HSPs in the heat shocked HELAs could protect the cells from both injury caused by potential toxicity of high concentrations of Me2SO and cryoinjury caused by the freeze-thawing/cryopreservation procedure.     

Synthesis,formation mechanism and electric property of hollow InP nanospheres

The present work reports on novel four-layer thermally driven piezoresistive cantilevers implemented in one- and two-dimensional arrays for parallel proximity scanning. There, the heater (metallic meander), the piezoresistive deflection sensor, and the metal actuation film with significantly higher thermal expansion coefficient make up separate layers. Actuation efficiency and cross-talk of the novel cantilever design are studied and compared with two recent designs: thin metallic film and ion-implanted heater. The novel actuator, integrated on a 240 μm long and 3 μm thick silicon cantilever and supplied by V _dc=1 V enables deflections up to 5 μm of the AFM-tip with an actuation efficiency of about 170 nm/mW and suppressed cross-talk between actuator and sensor.     

Multiplesite structure and photoluminescence properties of Eu3+ doped MgO nanocrystals

MgO:Eu³⁺ nanocrystals with average diameter around 15 nm were prepared via a facile combustion method under a weak reductive atmosphere at temperature as low as 300°C. The photoluminescence spectra showed that the MgO:Eu³⁺ nanocrystals emit white light, the hypersensitive transition (⁵ D ₀→⁷ F _j of Eu³⁺) emission was prominent in the emission spectra resulting from the noinversion symmetry local site at which Eu³⁺ ions were located. Two kinds of luminescence sites of Eu³⁺ are identified by means of the fluorescence decay and site-selective spectroscopy. The excitation and absorption spectra indicated that the absorption of surface state decreased with the increase of Eu³⁺ concentration, meaning that the surface defect decreased through Eu³⁺ doping for some of them located at the disordered sites near the surface or absorbed at the surface of MgO host. Meanwhile, absorptivity and CIE chromaticity coordinates of all samples were measured; the results were in accordance with the excitation and absorption spectra and photoluminescence spectra, respectively.     

Controlled growth of uniform nanoflakes-built pyrite FeS<Subscript>2</Subscript> microspheres and their electrochemical properties

Nanoflakes-built pyrite FeS₂ microspheres were synthesized through a simple solvothermal process in mixed solvents of N, N-dimethytformamide and ethylene glycol without using any surfactant. Both the composition of the solvents and urea were key factors for the formation of the uniform products. It was found that the flake-like intermediate products transformed into FeS₂ nanoflakes in situ in the early stage and Ostwald ripening growth mechanism would contribute to the uniformity of the final products. Electrochemical studies revealed that the nanoflakes-built pyrite FeS₂ microspheres exhibited large lithium storage capacities. This method can be easily controlled and is expected to be extendable to the fabrication of other metal chalcogenides with controlled shape and structure.