采用大口径投影光学系统监测远场散斑特征参数

大口径投影光学系统采用低成本、大口径菲涅耳透镜制作,可将远场散斑强度分布投影到CCD成像探测器上。通过CCD图像处理,能够对给定孔径上的接收功率、闪烁指数进行量化评估;在接收孔径足够大、保障散斑不会因为光束漂移效应而脱离菲涅耳透镜的条件下,该系统还可以对光束漂移和特征半径进行量化评估。同时讨论了CCD像元响应非均匀性误差及其影响、CCD辐照响应函数和图像几何投影系数的定标方法。实验表明,系统能够对激光大气传输过程中的远场散斑特征参数进行监测。特别对自由空间激光通信系统而言,可以为大气衰减和多种大气湍流效应综合作用下的中值电平慢衰落研究和检测阈值优化设计提供实验数据支撑。     

铜活化法诊断神光Ⅲ主机装置氘氚中子产额

介绍了铜活化诊断氘氚中子产额的测量原理,分析了62Cu和64Cu两种活化核素在符合测量中的贡献。针对不同范围内的中子产额测量,提出了系统灵敏度相对标定法和64Cu活化核标定法。通过添加中子屏蔽锥测量了标定场所散射中子影响。计算评估了63Cu(n,)64Cu反应过程对活化测量的影响。在神光Ⅲ主机装置上,利用该系统测量了直接驱动氘氚中子产额。实验结果表明：氘氚中子产额在109~1013范围采用相对标定方法较为合适,64Cu活化核的标定方法适用于1012~1016范围内产额测量。标定场所散射中子对灵敏度标定因子影响约0.4%。63Cu俘获辐射反应在64Cu活化核标定中贡献小于1%。目前神光Ⅲ主机装置直接驱动氘氚中子产额约81012。     

13 μs,200 ns和2 ns脉冲电场对酵母菌杀灭效果分析

研究了脉冲宽度对高压脉冲下细胞膜和细胞器膜跨膜电压的影响及细胞膜能量的变化,以及13 s,200 ns和2 ns脉冲对酿酒酵母（CICC31180）杀灭作用时脉冲数的影响。结果表明,随着脉冲数增加,13 s,200 ns和2 ns脉冲对啤酒酵母的灭杀效果均增强。在13 s脉宽,14 kV电压和50个脉冲数下,酵母达到最小存活率-4.3个对数;在200 ns脉宽,40 kV电压和500个脉冲数下,酵母达到存活率-2.6个对数;在2 ns脉宽,200 kV电压和500个脉冲数下,酵母达到存活率-2.8个对数。三种脉冲对酵母菌杀灭的存活率对数与脉冲数的关系表现不是线性的,脉冲数增加到一定程度,存活率下降变缓。在同等灭杀效果-2.0个对数下,2 ns脉冲比13 s脉冲在同轴电极中损耗的能量更少。     

一种双路矢量合成式毫米波预失真线性化器

针对目前行波管放大器模拟预失真技术中存在的幅度和相位特性关联性强的问题,提出一种双路矢量合成式预失真器。该预失真器由90电桥、模拟电调衰减器和反射式二极管预失真电路构成。根据理论分析和ADS软件仿真结果加工了实际电路并进行测试。实测结果表明：在工作频率29～31 GHz和额定输入功率区间内,该电路可实现与行波管特性相反的预失真性能;合理调整两支路偏置电压,可实现相位扩张改变30,而增益扩张变化量小于1 dB的性能,有效减小了模拟预失真器幅度和相位特性的关联性。     

神光Ⅱ装置上辐射驱动瑞利-泰勒不稳定性实验

在神光Ⅱ装置上开展了辐射驱动RT不稳定性的一系列实验,获得了不同初始扰动幅度、不同扰动波长、不同材料样品等条件下辐射烧蚀RT不稳定性增长的高时空分辨背光图像,特别是在大初始扰动幅度样品实验中获得了扰动增长的清晰图像,观察到了扰动增长从线性区到非线性区的过渡过程,二次和三次谐波的产生和发展清楚可见。充实了数值模拟程序考核的实验数据库,对间接驱动ICF点火靶设计和研究具有重要作用。     

CAEP XFEL波荡器束线初步物理设计

中国工程物理研究院计划开展XFEL光源的研制,主要通过电子束在波荡器中的辐射特性产生硬X射线。根据理论分析和数值模拟,在电子束最高能量可达12 GeV的实际条件下,初步设计了一条间隙可调的真空外波荡器束线,波荡器分为25段,每段长3.86 m,间隙7~10 mm,周期长度25.4 mm,磁场0.636~1.03 T,束线总长120 m左右,辐射光子能量为3~25 keV。     

Anomalous Impact of Surface Wettability on Leidenfrost Effect at Nanoscale

Leidenfrost effect is a common and important phenomenon which has many applications,however there is a limited body of knowledge about the Leidenfrost effect at the nanoscale regime.We investigate the impact of substrate wettability on Leidenfrost point temperature(LPT) of nanoscale water film via molecular dynamics simulations,and reveal a new mechanism different from that at the macroscale.In the molecular dynamics simulations,a method of monitoring density change at different heating rates is proposed to obtain accurate LPT under different surface wettability.The results show that LPT decreases firstly and then increases with the surface wettability at the nanoscale,which is different from the monotonous increasing trend at the macroscale.The mechanism is elucidated by analyzing the competitive effect of adhesion force and interfacial thermal resistance,as well as different contributions of gravity on LPT at the nanoscale and macroscale.The investigations can deepen the understanding of Leidenfrost effect at the nanoscale regime and also facilitate to guide the applications of heat transfer and flow transport.     

Effect of carbon nanotubes addition on electrochemical performance and thermal stability of Li4Ti5O12 anode in commercial LiMn2O4/Li4Ti5O12 full-cell

Li₄Ti₅O₁₂ (LTO)/carbon nanotubes (CNTs) composite material is synthesized based on a solid-state method by sand-milling, spray-drying and calcining at 850 ℃ under N₂ flow. The LTO/CNTs samples with 1 wt% and 3 wt% weight ratio of CNTs addition and the pristine LTO sample are prepared. The rate performance and the thermal stability of these samples are investigated based on LiMn₂O₄ (LMO)/LTO full-cell. The results show that theweight ratio of CNTs addition has distinct effect on LTO performances. The composite materials of LTO composited CNTs have better performance at high-rate due to the intercalation enhancement by conductive network of CNTs. At second, the overcharging temperature response of the cell's surface with 1 wt% CNTs addition is the lowest. The particle size distribution is measured and the most uniform particles are obtained with 1 wt% CNTs addition. This trend could explain that the mediumquantity of CNTs is optimal to improve the heat and mass transfer and prevent the problems of crystallite growing interference and aggregation during the calcination process.     

Impact of sugar stereochemistry on natural killer T cell stimulation by bacterial glycolipids

Natural killer T (NKT) cells recognize glycolipids produced by Sphingomonas bacteria, and these glycolipids contain C6-oxidized sugars, either glucuronic acid or galacturonic acid, linked to ceramides. Glycolipids with gluco stereochemistry are the most prevalent. Multiple studies have demonstrated that galactosylceramides are more potent stimulators of NKT cells than their glucose isomers. To determine if this stereoselectivity is retained in the context of the C6-oxidized sugars found in bacterial glycolipids, we prepared two sets of gluco and galacto-glycolipids oxidized at their C6 positions and compared their NKT stimulatory properties. In the context of carboxylic acid groups at C6, gluco stereochemistry gave the more potent responses. We also prepared bacterial glycolipids containing more complex ceramide groups to determine if these chains impact NKT cell responses.     

Blocking analysis andT(1) theorem

TheT(1) theorem with a weak condition on the distribution kernel is proved by using a new method—blocking analysis. It improves a result of Meyer’s. Project supported by the National Natural Science Foundation of China (Grant No. 19631080) and the Foundation of Advanced Research Center, Zhongshan University.