Controlled Synthesis of Thorium and Uranium Oxide Nanocrystals

Very little is known about the size and shape effects on the properties of actinide compounds. As a consequence, the controlled synthesis of well‐defined actinide‐based nanocrystals constitutes a fundamental step before studying their corresponding properties. In this paper, we report on the non‐aqueous surfactant‐assisted synthesis of thorium and uranium oxide nanocrystals. The final characteristics of thorium and uranium oxide nanocrystals can be easily tuned by controlling a few experimental parameters such as the nature of the actinide precursor and the composition of the organic system (e.g., the chemical nature of the surfactants and their relative concentrations). Additionally, the influence of these parameters on the outcome of the synthesis is highly dependent on the nature of the actinide element (thorium versus uranium). By using optimised experimental conditions, monodisperse isotropic uranium oxide nanocrystals with different sizes (4.5 and 10.7 nm) as well as branched nanocrystals (overall size ca. 5 nm), nanodots (ca. 4 nm) and nanorods (with ultra‐small diameters of 1 nm) of thorium oxide were synthesised.     

Air‐Stable Solid Aryl and Heteroaryl Organozinc Pivalates: Syntheses and Applications in Organic Synthesis

A wide range of air‐stable, solid, polyfunctional aryl and heteroarylzinc pivalates were efficiently prepared by either magnesium insertion or Hal/Mg exchange followed by transmetalation with Zn(OPiv)₂ (OPiv=pivalate). By reducing the amount of LiCl the air stability could be significantly enhanced compared with previously prepared reagents. An alternative route is directed magnesiation using TMPMgCl ? LiCl (TMP=2,2,6,6‐tetramethylpiperidyl) followed by transmetalation with Zn(OPiv)₂ or, for very sensitive substrates, direct zincation by using TMPZnOPiv. These zinc reagents not only show excellent stability towards air, but they also undergo a broad range of C?C bond‐formation reactions, such as allylation and carbocupration reactions, as well as addition to aldehydes and 1,4‐addition reactions. Acylation reactions can be performed by using an excess of TMSCl to overcome side reactions of the omnipresent pivalate anion.     

A convergent approach to batzelladine alkaloids. Total syntheses of (+)-batzelladine E, (−)-dehydrobatzelladine C,and (+)-batzelladine K

We recently reported a convergent strategy to access the polycyclic guanidinium alkaloid (+)-batzelladine B via an aldol addition–retro-aldol–aza-Michael addition cascade. Here we describe the application of this approach toward the total syntheses of (+)-batzelladine E, (?)-dehydrobatzelladine C, and (+)-batzelladine K. The identification of suitable methods to functionalize a common tropane core by electrophilic alkynylation and nucleophilic 1,2-addition were essential to generalizing this approach. We provide evidence for the intermediacy of an acylallene species in the cascade reaction.     

Synthesis of novel PPARα/γ dual agonists as potential drugs for the treatment of the metabolic syndrome and diabetes type II designed using a new de novo design program PROTOBUILD

Peroxisome proliferator activated receptors (PPARs) have been shown to have critical roles in fatty acid oxidation, triglyceride synthesis, and lipid metabolism - making them an important target in drug discovery. Here we describe the in silico design, synthesis and in vitro characterisation of a novel series of 2,5-disubstituted indoles as PPARα/γ dual agonists. PPAR activation assays are performed with known agonists diazabenzene (WY14.643), aminopyridine (BRL49653) and bisaryl (L165.041), as positive controls. All the indole compounds synthesized are found to be active PPARα and PPARγ agonists, with particular efficacy from those with 2-naphthylmethyl substitution. This is a useful demonstration of a new de novo design methodology implemented by the protobuild program and its ability to rapidly produce novel modulators for a well characterized drug target.     

Direct Evidence for Intermolecular Oxidative Addition of σ(SiSi) Bonds to Gold

Oxidative addition plays a major role in transition‐metal catalysis, but this elementary step remains very elusive in gold chemistry. It is now revealed that in the presence of GaCl₃, phosphine gold chlorides promote the oxidative addition of disilanes at low temperature. The ensuing bis(silyl) gold(III) complexes were characterized by quantitative ³¹P and ²⁹Si NMR spectroscopy. Their structures (distorted Y shape) and the reaction profile of σ(Si? Si) bond activation were analyzed by DFT calculations. These results provide evidence for the intermolecular oxidative addition of σ(Si? Si) bonds to gold and open promising perspectives for the development of new gold‐catalyzed redox transformations.     

Novel disposable bismuth-sputtered electrodes for the determination of trace metals by stripping voltammetry

This work describes a novel type of bismuth electrode for stripping voltammetry based on coating a silicon substrate with a thin bismuth film by means of sputtering. The bismuth-based sensors were characterized by optical methods (scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD)) and as well as by linear sweep voltammetry. Subsequently, the electrodes were tested for the detection of low concentrations of trace metals (Cd(II), Pb(II) and Ni(II)) by stripping voltammetry. Well-formed stripping peaks were observed for trace concentrations of the target analytes demonstrating “proof-of-principle” for these sensors. This type of electrochemical device, utilizing thin-film technology for the formation of the bismuth film, holds promise for future applications in trace metal analysis.     

Synthesis,thermal analysis,and spectroscopic and structural characterizations of tetranuclear nickel(II) cubane-type clusters with 2-hydroxybenzaldehydes or 2-hydroxyphenones

In this study, three novel tetranuclear nickel(II) cubane-type clusters with the general formula [Ni₄(L)₄(μ₃-CH₃O)₄(CH₃OH)₄] [L: the anion of 5-methyl-2-hydroxybenzaldehyde (1), 2-hydroxypropiophenone (2), and 2-hydroxybenzophenone (3)] were synthesized and characterized by single-crystal X-ray diffraction analysis. The crystal structure of each compound contains a tetranuclear cubane core [Ni₄O₄] based on an approximately cubic array of altering nickel and oxygen atoms with intracluster metal–metal separations of 3.04–3.14 Å. Each Ni(II) atom is surrounded by two oxygen atoms from the ligand (L) and by the μ₃-CH₃O oxygen atom that bridges three Ni atoms of the cubane core. The coordination sphere of Ni is completed with one methanol molecule and making six-coordinate with a distorted octahedral geometry. These complexes were characterized also by spectroscopy (IR and UV–Vis). Simultaneous TG/DTG–DTA techniques were used to analyze their thermal behavior under inert atmosphere, with particular attention to determine their thermal degradation pathways, which was found to be a multi-step decomposition accompanied by the release of the ligand molecules. Finally, the kinetic analysis of the decomposition processes was performed for the first step of complex (3), since only this verifies the requirement of applying an isoconversional method like Kissinger–Akahira–Sunose (KAS). For this step, we found the average value E _a = 107.8 ± 4.5 kJ mol^?1.     

Ultra‐Small Plutonium Oxide Nanocrystals: An Innovative Material in Plutonium Science

Apart from its technological importance, plutonium (Pu) is also one of the most intriguing elements because of its non‐conventional physical properties and fascinating chemistry. Those fundamental aspects are particularly interesting when dealing with the challenging study of plutonium‐based nanomaterials. Here we show that ultra‐small (3.2±0.9 nm) and highly crystalline plutonium oxide (PuO₂) nanocrystals (NCs) can be synthesized by the thermal decomposition of plutonyl nitrate ([PuO₂(NO₃)₂] ? 3 H₂O) in a highly coordinating organic medium. This is the first example reporting on the preparation of significant quantities (several tens of milligrams) of PuO₂ NCs, in a controllable and reproducible manner. The structure and magnetic properties of PuO₂ NCs have been characterized by a wide variety of techniques (powder X‐ray diffraction (PXRD), X‐ray absorption fine structure (XAFS), X‐ray absorption near edge structure (XANES), TEM, IR, Raman, UV/Vis spectroscopies, and superconducting quantum interference device (SQUID) magnetometry). The current PuO₂ NCs constitute an innovative material for the study of challenging problems as diverse as the transport behavior of plutonium in the environment or size and shape effects on the physics of transuranium elements.     

Formation of sulfines in the peroxyacid oxidation of neopentyl neopentanethiolsulfinate

Low temperature ¹H NMR and ¹³C NMR, and IR suggest that the $\text{m}$-chloroperbenzoic acid (MCPBA) oxidation of neopentyl neopentanethiolsulfinate leads to the formation of (E)- and (Z)-2,2-dimethylpropanethial S-oxide, neopentyl neopentanethiolsulfonate, and other products.     

Modelling of discontinuities through dipole distribution

An indirect boundary element method using dipole distribution is employed in order to model discontinuities inside the flow region. The problem of flow under a dam is treated with a sheet-pile in its foundation. The discontinuity across the sheet-pile is demonstrated, a general boundary element procedure for a mixed problem is outlined and the coefficients of the linear system are given in analytical form. Very good agreement with existing analytical results is obtained.