Er2S[SiO4]: Ein Erbiumsulfid‐ortho‐Oxosilicat mit ungewöhnlicher Sulfidionen‐Koordination

During the reaction of cadmium sulfide with erbium and sulfur in evacuated silica ampoules pink lath‐shaped crystals of Er₂S[SiO₄] occur as by‐product which were characterized by X‐ray single crystal structure analysis. The title compound crystallizes orthorhombically in the space group Cmce (a = 1070.02(8), b = 1235.48(9), c = 683.64(6) pm) with eight formula units per unit cell. Besides isolated ortho‐oxosilicate units [SiO₄]^4?, the crystal structure contains two crystallographically independent Er³⁺ cations which are both eightfold coordinated by six oxygen and two sulfur atoms. The sulfide anions are surrounded by four erbium cations each in the shape of very distorted tetrahedra. These excentric [SEr₄]¹⁰⁺ tetrahedra build up layers according to by vertex‐ and edge‐connection. They are piled parallel to (010) and separated by the isolated ortho‐oxosilicate tetrahedra.     

Rapid biomass analysis

New, rapid, and inexpensive methods that monitor the chemical composition of corn stover and corn stover-derived samples are a key element to enabling the commercialization of processes that convert stover to fuels and chemicals. These new techniques combine near infrared (NIR) spectroscopy and projection to latent structures (PLS) multivariate analysis to allow the compositional analysis of hundreds of samples in 1 d at a cost of about $10 each. The new NIR/PLS rapid analysis methods can also be used to support a variety of research projects that would have been too costly to pursue by traditional methods.     

Computational study of the halogen atom-benzene complexes

The structures of halogen atom-benzene complexes were investigated by modern DFT and ab initio computational methods. The spectroscopic properties of the complexes are also predicted and are in good agreement with experiment where such data have been reported. The fluorine atom-benzene complex is predicted to be a sigma complex due to the strength of a C-F bond. The chlorine atom-benzene complex is predicted to have an eta(1) pi complex structure, which is only slightly more favorable (1.1 kcal/mol with the BH&HLYP/6-311++G method including the ZPE correction) than a sigma complex but is significantly more stable (4.4 kcal/mol with the BH&HLYP/6-311++G method including the ZPE correction) than the eta(6) pi complex. The bromine and iodine benzene complexes are also predicted to prefer an eta(1) pi complex structure.     

Stereospecific rearrangements during the synthesis of pyrrolidines and related heterocycles from cyclizations of amino alcohols with vinyl Sulfones

Conjugate additions of amino alcohols derived from alpha-amino acids to vinyl sulfones, followed by N-benzylation, chlorination, and intramolecular alkylation, provide a convenient route to substituted pyrrolidines. The process is accompanied by the stereospecific rearrangement of substituents from the alpha-position of the amine to the beta-position of the product and takes place via the corresponding aziridinium ion intermediates. Another type of rearrangement was observed during the reaction of (2-piperidine)methanol or 2-(2-piperidine)ethanol with phenyl trans-1-propenyl sulfone, in which the methyl group appears to migrate from the beta- to the alpha-position of the sulfone moiety. This process involves the isomerization of phenyl trans-1-propenyl sulfone to phenyl 2-propenyl sulfone by the addition-elimination of catalytic benzenesulfinate anion to the former vinyl sulfone, followed by conjugate addition of the amino group to the latter sulfone. Chlorination and intramolecular alkylation then afford the corresponding rearranged indolizidine and quinolizidine derivatives, respectively.     

Solvent Effects on the Absorption Spectrum of the Product and the Equilibrium Constant for the Proton Transfer Reaction from 1-Phenacylquinolinium Bromide to Amines

The equilibrium constants, K ₂, have been determined for the proton-transfer reactions of 1-phenacylquinolinium ion, PHQ⁺, with several amines {triethylamine (TEA), N,N,N′,N′-tetramethylethylenediamine (ED), N,N,N′, N′-tetramethylpropanediamine (PD), N,N,N′,N′-tetramethylbutanediamine (BD), and 1,8-bis(dimethylamino-naphthalene (DMAN)} in acetonitrile (AN), AN-tetrahydrofuran (THF) and AN-ethanol (EtOH) mixtures. The reaction was followed spectrophotometrically using a stopped-flow technique. The K ₂ value decreased for DMAN and increased for TEA with increasing vol-% of THF in AN-THF mixtures. The changes in the K ₂ value for ED, PD and BD changed in the order: ED, PD and BD from a pattern similar to TEA to a pattern similar to DMAN. The change in the K ₂ value for DMAN with increasing vol-% of THF in AN-THF mixtures was explained by the effect of polarity on the stability of P⁻Q⁺ (the deprotonated product of PHQ⁺). The effect of THF on the K ₂ value is consistent with that of the peak wavelength of the absorption spectrum of P⁻Q⁺. The change in the K ₂ value for TEA, ED, PD and BD depended on the structures of the protonated bases, one of the products for this reaction. The effect of EtOH on the K ₂ value for DMAN was examined in ternary EtOH-THF-AN mixtures that contain different amounts of EtOH and whose relative permittivities were adjusted to that of EtOH. The K ₂ value increased with increasing vol-% of EtOH because of the stabilization of P⁻Q⁺ upon the formation of the hydrogen-bonded complex with EtOH. The absorption spectrum of P⁻Q⁺ demonstrated a blue shift as the vol-% of EtOH increased.     

Double hexagonal chains with minimal total <Emphasis Type="Italic">π</Emphasis>-electron energy

The total energy of all π-electrons in a conjugated hydrocarbon (within the framework of HMO approximation) is the sum of the absolute value of all the eigenvalues of its corresponding graph. In this paper, we consider “double hexagonal chains” as benzenoids constructed by successive fusions of successive naphthalenes along a zig–zag sequence of triples of edges as appear on opposite sides of each naphthalene unit. It is shown that if the fusions are such as to give a polyaceacene then the total π-electron energy is the minimum from among all the double hexagonal chains with the same number of naphthalene units.      

Lewis base activation of lewis acids. Addition of silyl ketene acetals to aldehydes

The weak Lewis acid silicon tetrachloride can be activated by catalytic amounts of the chiral bisphosphoramide (R,R)-3 to form a highly reactive, chiral trichlorosilyl cation which is an extremely effective promoter of aldol addition reactions between aldehydes and silyl ketene acetals. The tert-butyldimethylsilyl ketene acetal of methyl acetate adds nearly instantaneously to aromatic and olefinic aldehydes as well as aliphatic aldehydes (albeit more slowly) with excellent enantioselectivity. The homologous tert-butyldimethylsilyl ketene acetal of tert-butyl propanoate adds with nearly exclusive anti diastereoselectivity to a similar range of aldehydes also with excellent enantioselectivity. The origin of the slower reaction rate with aliphatic aldehydes is revealed to be the formation of chlorosilyl ether adducts.     

Oxidation of organic sulfides by vanadium haloperoxidase model complexes

In addition to halide oxidation, the vanadium haloperoxidases are capable of oxidizing sulfides to sulfoxides. Four vanadium complexes with tripodal amine ligands, K[VO(O(2))(heida)] (1), VO(2)(bpg) (2), K[VO(2)(ada)] (3), and K(2)[VO(O(2))(nta)] (4), previously shown to perform bromide oxidation (Colpas, G. J.; Hamstra, B. J.; Kampf, J. W.; Pecoraro, V. L. J. Am. Chem. Soc. 1996, 118, 3469-3477), have now been shown to oxidize aryl alkyl sulfides to the corresponding sulfoxides. The oxidation was observed by the disappearance of thioanisole's ultraviolet absorption at 290 nm, by the change in the aromatic region of the (1)H NMR spectrum of the sulfides, and by changes in the complexes' (51)V NMR spectra. The amount of methyl phenyl sulfide oxidized in 3 h was 1000 equiv (per metal complex). The oxidation product is almost exclusively sulfoxide, with very little sulfone (less than 3% over a 3 h experiment) formed. This is consistent with an electrophilic oxidation mechanism, as had been proposed for oxidation of bromide by 1-4. The rate was found to be first order in substrate concentration, similar to the rate law observed for bromide oxidation. Unlike the bromide oxidation, the equivalent of acid required for peroxovanadium complex activation is not consumed. The complexes 1-4 are not reactive with styrene or cyclooctene. The relevance of these reactions to the mechanism of the vanadium haloperoxidases and, more generally, peroxovanadium oxygenation of sulfides will be discussed.     

Plasma fluorination of polyolefins

ESCA and contact angle measurements were used to characterize the surfaces of Polyethylene and polypropylene films exposed to SF₆, CF₄, and C₂F₆ plasmas. None of these gases polymerized in the plasma. However, all plasma treatments grafted fluorinated functionalities directly to the polymer surfaces. SF₆ plasmas graft fluorine atoms to a polyolefin surface. CF₄ plasmas also react by a mechanism dominated by fluorine atoms, but with some contribution from CF_x-radical reactions. Although C₂F₆ does not polymerize, the mechanism of grafting is still dominated by the reactions of CF_x radicals. For all gases studied, the lack of polymerization is attributed to competitive ablation and polymerization reactions occurring under conditions of ion bombardment.     

A novel phosphoramidite method for automated synthesis of oligonucleotides on glass supports for biosensor development

Two protocols for functionalization of glass supports with hexaethylene glycol (HEG)-linked oligonucleotides were developed. The first method (standard amidite protocol) made use of the 2-cyanoethyl-phosphoramidite derivative of 4,4′-dimethoxytrityl-protected HEG. This was first coupled to the support by standard solid-phase phosphoramidite chemistry followed by extension with a thymidylic acid icosanucleotide. Stepwise addition of the linker phosphoramidite graduated at 1% (relative to the total sites available) perstep at 50°C resulted in an optimal yield of immobilized oligonucleotides at a density of 2.24 × 10¹⁰ strands/mm². This observed loading maximum lies well below the theoretical maximum loading owing to nonspecific adsorption of HEG on the glass and subsequent blocking of reactive sites. Surface loadings as high as 3.73 × 10¹⁰/mm² and of excellent sequence quality were achieved with a reverse amidite protocol. The support was first modified into a 2-cyanoethyl-N,N-diisopropylphosphoramidite analog followed by coupling with 4,4′-dimethoxytrityl-protected HEG. This protocol is conveniently available when using a conventional DNA synthesizer. The reverse amidite protocol allowed for control of the surface loading at values suitable for subsequent analytical applications that make use of immobilized oligonucleotides as probes for selective hybridization of sample nucleic acids of unknown sequence and concentration.