Novel alkyl-modified anionic siloxanes as pseudostationary phases for electrokinetic chromatography. III. Performance in organic-modified buffers

Anionic water-soluble siloxanes modified with different amounts of alkyl chains have been used as pseudostationary phases in electrokinetic chromatography. Ionic siloxane polymers with attached alkyl chains of C8 and C12 and having different alkyl chain densities have been employed previously to achieve selective and efficient separations with a range of electrophoretic mobilities and methylene selectivities. In this study, the performance of three alkyl-modified siloxanes is examined in different organic-modified buffers and at differing amounts of organic modifier. The organic modifiers used are acetonitrile and methanol. The siloxanes are stable in these organic solvents and show good mobility and good methylene selectivities even at high concentration of organic solvent. Siloxanes have also been used to separate a mixture of 14 polynuclear aromatic hydrocarbons in an acetonitrile-modified buffer.     

Reduction and methyl transfer kinetics of the alpha subunit from acetyl coenzyme a synthase

Stopped-flow was used to evaluate the methylation and reduction kinetics of the isolated alpha subunit of acetyl-Coenzyme A synthase from Moorella thermoacetica. This catalytically active subunit contains a novel Ni-X-Fe4S4 cluster and a putative unidentified n = 2 redox site called D. The D-site must be reduced for a methyl group to transfer from a corrinoid-iron-sulfur protein, a key step in the catalytic synthesis of acetyl-CoA. The Fe4S4 component of this cluster is also redox active, raising the possibility that it is the D-site or a portion thereof. Results presented demonstrate that the D-site reduces far faster than the Fe4S4 component, effectively eliminating this possibility. Rather, this component may alter catalytically important properties of the Ni center. The D-site is reduced through a pathway that probably does not involve the Fe4S4 component of this active-site cluster.     

Meso-tetraaryl cofacial bisporphyrins delivered by Suzuki cross-coupling

The Suzuki cross-coupling methodology provides a facile synthetic approach for the modular preparation of meso-tetraaryl cofacial bisporphyrins anchored by xanthene and dibenzofuran. This synthetic method furnishes cofacial bisporphyrin templates with enhanced steric and electronic protection from mu-oxo formation and oxidative degradation. The ability of these platforms to support multielectron oxidation chemistry mediated by proton-coupled electron transfer (PCET) is demonstrated by their reactivity for the catalytic disproportionation of hydrogen peroxide to oxygen and water.     

Intramolecular C-H activation by inferred terminal cobalt imido intermediates

Reaction of TpR,MeCo(I) dinitrogen complexes (R = iPr, tBu) with trimethylsilyl azide yields structurally characterized compounds that imply the formation of reactive intermediates of the type TpR,MeCo=NSiMe3. These cobalt imido species apparently abstract hydrogen from the 3-substituent of the Tp-ligand, leading to the formation of amido complexes accompanied by either Co-C bond formation (R = tBu) or C-C bond formation (R = iPr).     

Tuning of the alpha-terthiophene radical cation coupling reaction using mixed micelles with varying charge density.

The photophysics and photochemistry of alpha-terthiophene (alphaT), compartmentalized in mixed nonionic/anionic micelles, have been investigated with focus on the influence of the micellar surface charge density on the formation of the radical coupling product alpha-hexathiophene (alphaH). By varying the ratio of nonionic-to-anionic surfactants, and assuming ideal mixing, the charge density of the mixed micelles was varied. From Poisson-Boltzmann calculations, performed using the cell model, the electrostatic potential and the counterion activity were estimated as a function of the distance from the micellar surface. Upon excitation, the triplet state of alphaT is formed, from which the alphaT radical cation can be formed by absorption of a second photon. The radical cation can form alphaH if it encounters another alphaT radical cation. Under the experimental conditions used, this implies that the alphaH formation only occurs if the compartmentalized radical cation is able to migrate from its host micelle to another micelle, either via the surrounding bulk or by fusion of two micelles followed by mixing of their contents before micellar fission. The formation yield of the radical cation depends on the charge density of the mixed micelle; a lower charge density, that is, an increased amount of nonionic surfactant, lowers the yield. The yield of the coupling product alphaH, however, does not follow the same trend. A maximum yield of alphaH is found at intermediate nonionic surfactant molar ratios. This behavior is understood in terms of the Poisson-Boltzmann simulation results and by comparing charge-density changes as a function of molar fraction with the changes in counterion activity. The alphaH yield is a result of the balance between an increased possibility of radical cation bulk migration and a lowered electrostatic stabilization of the radical.     

Snapshots of dioxygen activation by copper: the structure of a 1:1 Cu/O(2) adduct and its use in syntheses of asymmetric Bis(mu-oxo) complexes

The X-ray structure of a 1:1 Cu/O(2) adduct revealed side-on (eta(2)) O(2) coordination. Density functional calculations corroborated the structure, indicated a significant contribution of a Cu(III)-(O(2)(2-)) resonance form, and provided insights into the key bonding interactions. Reaction of a 1:1 adduct supported by a slightly different beta-diketiminate ligand with Cu(I) reagents resulted in the formation of novel asymmetric bis(mu-oxo) complexes that were identified by EPR, UV-vis, and Raman spectroscopy, as well as by an X-ray structure in one instance.     

Ligand and loop variations at type 1 copper sites: influence on structure and reactivity

Type 1 (T1) copper sites promote biological electron transfer and are found in the cupredoxins and a number of copper-containing enzymes including the multi-copper oxidases. A T1 copper site usually has a distorted tetrahedral geometry with strong ligands provided by the thiolate sulfur of a Cys and the imidazole nitrogens of two His residues. The active site structure is typically completed by a weak axial Met ligand (a second weak axial interaction is found in azurin resulting in a trigonal bipyramidal geometry). The axial Met is not conserved and Gln, Phe, Leu and Val are also found in this position. Three of the four ligands at a T1 copper site are situated on a single C-terminal loop whose length and structure varies. Studies are discussed which investigate both the influence of physiologically relevant axial ligand alterations, and also of mutations to the length and structure of the ligand-containing loop, on the properties of T1 copper sites.     

Aminocyclodextrins to facilitate the deprotonation of 4-tert-butyl-alpha-nitrotoluene

6A-Amino-6A-deoxy-beta-cyclodextrin enhances the rate of the deprotonation of 4-tert-butyl-alpha-nitrotoluene. The rate constants for reaction of the cyclodextrin-bound species, kinc = 4 x 10(-3), 9 x 10(-3) and 19 x 10(-3) s(-1), at pH 6.0, 6.5 and 7.0, respectively, in 0.1 mol dm(-3) aqueous phosphate buffer containing 1% methanol at 298 K. These rate constants correspond to a rate acceleration (kinc/kun) of ca. 10 times at each pH. Under the same conditions, 6A-dimethylamino-6A-deoxy-beta-cyclodextrin and 6A-(2-aminoethylamino)-6A-deoxy-beta-cyclodextrin are more effective; at pH 6.0, 6.5 and 7.0, for the former, kinc = 3 x 10(-2), 7 x 10(-2) and 12 x 10(-2) s(-1), whilst for the latter, kinc = 4 x 10(-2), 5 x 10(-2) and 9 x 10(-2) s(-1), respectively. Each cyclodextrin also decreases the pKa of the nitrotoluene, from 6.8 in free solution, to 6.2 when bound. The accelerated deprotonation by 6A-amino-6A-deoxy-beta-cyclodextrin is reflected in the enhanced rates of hydrogen-deuterium exchange of the nitrotoluene in deuterium oxide, and in the conjugate addition of the nitrotoluene to methyl vinyl ketone in aqueous solution.     

Synthesis of nonracemic allylic hydroxy phosphonates via alkene cross metathesis

Allylic hydroxy phosphonates and their derivatives can be interconverted by using cross metathesis with second generation Grubbs catalyst. The absolute stereochemistry of the starting phosphonate is conserved in the product. Cross metathesis reaction of the acrolein-derived phosphonate 2a yields a series of functionalized allylic hydroxy phosphonates. However, the cross metathesis reaction is often accompanied by competing dimerization and alkene migration reactions leading to a reduction in yield. The cinnamaldehyde- and crotonaldehyde-derived phosphonates 2b and 2c were also examined. In general, the metathesis reactions of phosphonates 2b and 2c are considerably slower than those for phosphonate 2a leading to mixtures. Several hydroxyl-protected derivatives of the phosphonate 2a (methyl carbonate 3a, acetate 4a, N-tosyl carbamate 5a, TBDMS 6a, and acetoacetate 7a) undergo metathesis without competing side reactions to give substituted allylic phosphonates in good to excellent yield.     

The first genuine observation of fluorescent mononuclear phthalocyanine aggregates

An initial photophysical study of a tetra-solketal-substituted zinc phthalocyanine is reported; at low temperature this compound exhibits very strong aggregation, and a new red shifted emission peak is observed, lambda max approximately 750 nm, attributed to a fluorescent phthalocyanine dimer.