Growth rate determination of heterogeneous microbial population in swine manure

The effect of manure concentration on the growth of the heterogeneous microbial population under batch condition was studied. Four manure concentrations were used in the study. The dehydrogenase activity was used as a measure of the active biomass in the manure. The chemical oxygen demand test was used to measure the change in organic material caused by biological activities. The growth curve of the heterogeneous microbial population in swine manure was essentially similar to that of a pure culture grown batchwise in that it had the four principle phases: lag, exponential growth, stationary, and death. The exponential growth phase followed a diauxic growth pattern. High concentration of manure had an inhibitory effect on the microbial growth. Manure diluted less than 1:3 (manure:water) depressed the specific growth rate of the microbial population.     

Challenges associated with the synthesis of unusual o-carboxamido stilbenes by the Heck protocol: Intriguing substituent effects, their toxicological and chemopreventive implications

The syntheses of fourteen unusual o-carboxamido stilbenes by the Heck protocol revealed surprising complexity related to intriguing substituent effects with mechanistic implications. The unexpected cytotoxic and chemopreventive properties also seem to be substituent dependent. For example, although stilbene 15d (with a 4-methoxy substituent) showed cytotoxicity on HT29 colon cancer cells with an IC(50) of 4.9 μM, the 3,4-dimethoxy derivative (15c) is inactive. It is interesting to observe that the 3,5-dimethoxy derivative (15e) showed remarkable chemopreventive activity in WRL-68 fetal hepatocytes, surpassing the gold standard, resveratrol. The resveratrol concentration needed to be 5 times higher than that of 15e to produce comparable elevation of NQO1.     

Evaporative Preconcentration of Fluorescent Protein Samples in Capillary Based Microplates

The preconcentration of analytes is important in biochemical analysis as it offers the ability to detect for trace species, and increase signal-to-noise ratios when using optical sensing on fluorophores. A strong advantage of the evaporation technique lies in its ability to operate without the need of any energy source; albeit major challenges exist on how to increase the surface area exposure to air for heightened evaporation, ensure no further increases once specified analyte concentrations have been achieved, and not needing any intervening membranes. We demonstrate here that the droplet creation and retraction approach in capillary based microplates offers such abilities whilst at the same time facilitating mixing.     

Low temperature quenching and high efficiency Tm, La or Tb co-doped CaSc2O4:Ce phosphors for light-emitting diodes

Low temperature quenching and high efficiency CaSc₂O₄:Ce³⁺ (CSO:Ce³⁺) phosphors co-doped with Tm³⁺, La³⁺ and Tb³⁺ ions were prepared by a solid state method and the phase-forming, morphology, luminescence and application properties of these phosphors were investigated. The results showed that co-doping of Tm³⁺, La³⁺ and Tb³⁺ ions can improve the luminescence properties and decrease temperature quenching of CSO:Ce³⁺ phosphor remarkably. High efficiency green-light-emitting diodes were fabricated with the prepared phosphors and InGaN blue-emitting (∼460 nm) chips. The good performances of the green-light-emitting LEDs made from co-doped CSO:Ce³⁺ phosphors confirm the luminescence enhancement and indicate that Tm³⁺, La³⁺ and Tb³⁺ co-doped CSO:Ce³⁺ phosphors are suitable candidates for the fabrication of high efficiency white LEDs.     

Computer-aided spillway design using the boundary element method and non-linear programming

The general context of this paper is to support the design of spillways by a direct mathematical approach instead of trial-and-error methods. First, a two-dimensional model is formulated to determine the free surface and the discharge for a stationary, incompressible, homogeneous, non-viscous and irrotational flow over a fixed spillway. The flow satisfies the Laplace equation and the Bernoulli equation (potential flow). An important feature of the model is that it can be extended to design the spillway structure when the spillway is not fixed but the pressure on the spillway is described by a cavitation criterion. Next, the continuous model is discretized by the boundary element method (BEM). We use a non-linear programming algorithm to calculate the pressures and the shape of the spillway. A computer-aided design package is developed on a PC using the equations describing the free surface, the BEM and standard optimization techniques. The input and output of the model are realized using graphical routines. Finally, we discuss the convergence and the computation time of the algorithms.     

Numerical study of steady/unsteady flow and heat transfer in porous media using a characteristics-based matrix-free implicit FV method on unstructured grids

In this study, a high-resolution characteristic-based finite-volume (FV) method on unstructured grids [Int. J. Numer. Method Eng. 50 (2001) 11; Int. J. Heat Fluid Flow 21 (2000) 432] is extended by a matrix-free implicit dual-time stepping scheme for the numerical simulation of steady and unsteady flow and heat transfer with porous media. The method has been used to study the characteristics of a complex problem: flow and heat transfer in a channel with multiple discrete porous blocks, which was originally proposed by Huang and Vafai [J. Thermophys. Heat Transfer 8 (3) (1994) 563]. In addition, flow and heat transfer in a channel partially or fully filled with porous layers and containing solid protruding blocks with constant heat flux on its lower surface are also investigated in details. Hydrodynamic and heat transfer results are reported for both steady and transient flow cases. In particular, the effects of Darcy and Reynolds numbers on heat transfer augmentation and pressure loss are studied. An in-depth discussion of the formation and variation of recirculation is presented and the existence of optimum porous insert is demonstrated. At high Reynolds numbers the flow in the porous channel exhibits a cyclic characteristics although unlike the non-porous channel flow, the cyclic vortex development is only restricted to a small area behind the last solid block, while temperature changes more slowly and does not exhibit cyclic variations over a long period of time. It is shown that for all the cases studied altering some parametric values can have significant and interesting effects on both flow pattern as well as heat transfer characteristics.     

Stability of noisy nonlinear auto-parametric systems

The purpose of this work is to examine the stationary motion and stability properties of stationary motion of two degree-of-freedom noisy auto-parametric systems We shall use analytical techniques to extend the existing results to examine such multi-dimensional nonlinear systems with noise, and in particular additive white noise. We obtain an approximation for the top Lyapunov exponent, the exponential growth rate, of the response of the so-called single-mode stationary motion. We show analytically that the top Lyapunov exponent is positive, and for small values of noise intensity ɛ and dissipation ɛ² the exponent grows in proportion with ɛ^2/3.