Dimetallic Complexes with Bridging Seven-membered Cycloolefins. Synthesis,Multinuclear NMR.-Spectroscopic Properties and Structure

The synthesis of dimetallic olefin complexes of the type L¹M¹C₇H₇M²L² (M¹ = Fe, Co, Rh; M² = Rh, Ir, Pd; L¹ = CO, C₅H₅; L² = diene, allyl, P(OR)₃) is described. The fluxional structures were investigated by ¹³C-, ⁵⁷Fe- and ¹⁰³Rh-NMR.-spectroscopy, and a cisoid dimetallic coordination, including a (metal, metal)-bond, can be deduced for the C₇H₇-ring. ⁵⁷Fe- and ¹⁰³Rh-chemical shifts give indications for the charge distribution in the 34e-complexes. The homodimetallic complex (Cp)Rh(tropone)Rh(Cp) ( 13 , Cp = cyclopentadienyl) and the corresponding 2-methoxytropone complex 14 were synthesized in addition to the above mentioned complexes. A fluxional bis(1-3-η-allyl)-coordination of the two Rh-atoms was derived from the temperature-dependent ¹³C-NMR.-spectra. A spin simulation of the (Cp)-multiplets of 12 and 13 yields information about (Rh, Rh)-spin-coupling which amounts to ≈5 Hz at 30°.     

Swallowtail porphyrins: synthesis, characterization and incorporation into porphyrin dyads

The incorporation of symmetrically branched tridecyl ("swallowtail") substituents at the meso positions of porphyrins results in highly soluble building blocks. Synthetic routes have been investigated to obtain porphyrin building blocks bearing 1-4 swallowtail groups. Porphyrin dyads have been synthesized in which the zinc or free base (Fb) porphyrins are joined by a 4,4'-diphenylethyne linker and bear swallowtail (or n-pentyl) groups at the nonlinking meso positions. The swallowtail-substituted Zn(2)- and ZnFb-dyads are readily soluble in common organic solvents. Static absorption and fluorescence spectra and electrochemical data show that the presence of the swallowtail groups slightly raises the energy level of the filled a(2u)(pi) HOMO. EPR studies of the pi-cation radicals of the swallowtail porphyrins indicate that the torsional angle between the proton on the alkyl carbon and p-orbital on the meso carbon of the porphyrin is different from that of a porphyrin bearing linear pentyl groups. Regardless, the swallowtail substituents do not significantly affect the photophysical properties of the porphyrins or the electronic interactions between the porphyrins in the dyads. In particular, time-resolved spectroscopic studies indicate that facile excited-state energy transfer occurs in the ZnFb dyad, and EPR studies of the monocation radical of the Zn(2)-dyad show that interporphyrin ground-state hole transfer is rapid.     

Simultaneous saccharification and fermentation of pretreated hardwoods

A series of correlations was made between the performance of 15 wood species in simultaneous saccharification and fermentation (SSF) and their respective chemical compositions. A compelling inverse trend (p < 0.001) was demonstrated between the percent conversion of glucan to ethanol during SSF and the Klason lignin content of the wood samples before dilute acid pretreatment. No significant relationships were found between the glucan, xylan, and ash compositions of the native wood samples and ethanol yield. This observation is unique and provides a convenient predictor of biomass conversion efficiency.     

Europium(II) and ytterbium(II) cyclic organohydroborates with agostic interactions

The divalent lanthanide bis((cyclooctane-1,5-diyl)dihydroborate) complexes {K(THF)4}2{Ln{(mu-H)2BC8H14}4} (Ln = Eu, 3; Yb, 4) were prepared by a metathesis reaction between (THF)(x)LnCl2 and K[H2BC8H14] in THF in a 1:4 molar ratio. Although the reaction ratios were varied between 1:3 and 1:6, complexes 3 and 4 were the only lanthanide 9-BBN hydroborates produced. Because of disorder of THF in crystals of 3 and 4, good single-crystal X-ray structural data could not be obtained. However, when the potassium cation was replaced by the tetramethylammonium cation or when MeTHF (2-methyltetrahydrofuran) was employed in place of THF, good quality crystals were obtained. Complexes [NMe4]2[Ln{(mu-H)2BC8H14}4] (Ln = Eu, 5; Yb, 6) were afforded by metathesis reactions of NMe4Cl with 3 and 4 in situ. On the basis of the single-crystal X-ray diffraction analysis, the four 9-BBN tetrahydroborate ligands are tetrahedrally arranged around the lanthanide cation in 5 and 6. The two structures differ in that one alpha-C-H bond from each of the four {(mu-H)2BC8H14}4 units exhibits an agostic interaction with Eu(II) in 5 but, in complex 6, only two of the alpha-C-H bonds form agostic interactions with Yb(II). Complexes {K(MeTHF)3}2{Ln{(mu-H)2BC8H14}4} (Ln = Eu, 7; Yb, 8) were produced by employing MeTHF in place of THF. The structures of 7 and 8 display connectivity between the anion {Ln{(mu-H)2BC8H14}4}2- and the cation {K(MeTHF)3}+, in which the potassium not only interacts directly with the hydrogens of the Ln-H-B bridged bonds but is also involved in agostic interactions with alpha-C-H bonds. By systematically examining the structures of complexes 3-8 and taking into account the previously reported complexes (THF)4Ln{(mu-H)2BC8H14}2 (Ln = Eu, 1; Yb, 2), it is concluded that Eu(II) appears to have a better ability to form agostic interactions than Yb(II) because of its larger size, even though Yb(II) has a higher positive charge density.     

Solvothermal synthesis and structure of a new selenium-rich selenophosphate K(3)PSe(4).2Se(6)

The compound K(3)PSe(4).2Se(6) was synthesized at 110 degrees C via solventothermal techniques from binary starting materials and Se in acetonitrile. The compound crystallizes in the space group Fd macro 3 of the cubic system with eight formula units in a cell with a dimension of a = 16.415(2) A at T = 193 K. The structure contains an unusual intermixing of ionic and uncharged species. The selenophosphate tetrahedral trianions PSe(4)(3-) are surrounded by potassium cations; other potassium cations in the structure are coordinated to 12 selenium atoms from four Se(6) rings in a tetrahedral arrangement. There are no short contacts between adjacent selenium rings. Heating the same reaction mixture to 160 degrees C results in the formation of only needles of trigonal selenium.     

P840-Reaction Centers from Chlorobium tepidum–Quinone Analysis and Functional Reconstitution into Lipid Vesicles

Membranes of Chlorobium tepidum contain about 35, 45 and2–10 molecules of menaquinone-7, chlorobium quinone (1′-oxo-menaquinone-7) and of the polar menaquinone (probably 1′-OH-menaquinone-7) per reaction center, respectively. None of these quinones was retained during the isolation of P840-reaction centers beyond the detection limit of about 0.2 quinones per reaction center, neither in the core complex nor in functionally intact reaction center preparations. The latter is shown to catalyze the formation of an electrochemical proton gradient in the presence of ascorbate and phenazinium methosulfate, when it is incorporated into lipid vesicles.     

Heterocyclisations des hydroxy-6 methoxy-2 hexene-2 et heptene-2 oates de methyle.

Tetrahydropyran derivatives – and – are formed in good yields by cyclisation of methyl-6-hydroxy-2-hexenoate or 2-heptenoate mediated by various electrophilic reagents (mCPBA, benzeneselenyl chloride, N-bromosuccinimide, iodine). Cyclisations of Z and E isomers are stereospecific. The diastereoselectivity of cyclisation of the secondary alcohol varies with the nature of the electrophilic reagent.     

Die elektrochemische Reduktion von CSSe und CSe2 in Dimethylformamid: Heterocyclische 1,2-Dichalkogenolate und ihre Koordinationschemie

Electrochemical Reduction of CSSe and CSe₂ in Dimethylformamide: Heterocyclic 1,2-Dichalcogenolates and their Coordination Chemistry Starting from carbon diselenide or carbon selenidesulfide the electrochemical preparation (electrosynthesis) of heterocyclic dichalcogenolates C₃X₅^2? (X = Se: dsis; X = S/Se: C₃S_xSe_y^2?) is outlined. The 1,2-dichalcogenolate compounds were isolated and characterized as dibenzoyl derivatives. Bis- or tris-chelates of general type A_m[M(C₃X₅)_n] (with A = Bu₄N⁺, Ph₄As⁺; M = Zn^II, Pt^II, Pd^II, Ni^III, Cu^III, Au^III, In^III; X = Se, S/Se; m = 1, 2, 3; n = 2, 3, respectively) are available directly from methanolic solutions of the dibenzoylates after hydrolytic cleavage of the latter with sodium methanolate. In addition bis-chelates Bu₄N[Ni(C₃X₅)₂] (X = Se, S/Se) have been characterized by cyclovoltammetry and epr spectroscopy and compared with the corresponding all-sulfur ligand compound Bu₄N[Ni(dmit)₂] (X = S). Arguments are given for the fact that the allselenium ligand dsis (X = Se) yields the Cu^III or Ni^III chelate at once whereas with dmit using identical conditions the metal(II) compounds are formed.     

Synthesis and in vitro degradation of poly(N‐vinyl‐2‐pyrrolidone)‐based graft copolymers for biomedical applications

This work is devoted to the design of a novel family of hydrosoluble biomaterials: poly(N‐vinyl‐2‐pyrrolidone) (PVP)‐based graft copolymers. A synthesis route has been elaborated in which ω‐functionalized PVP is prepared via chain‐transfer radical polymerization, end‐group modified, and subsequently grafted onto a polyhydroxylated backbone, typically dextran or poly(vinyl alcohol). The resulting graft copolymer biomaterials are designed for use in various biomedical applications, particularly as materials with a stronger potential for plasma expansion than already existing products have. The graft copolymers are potentially degradable because the PVP grafts are connected to the polyol backbone via a hydrolytically labile carbonate or ester linkage. The degradation of the graft copolymers was performed in vitro over a period of 6 weeks. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3652–3661, 2002     

Does CH prefer a C2v rather than a Cs structure?

The closely related C_s ( 1 ) and C_2v ( 3 ) structures of CH have been reinvestigated at many ab initio levels using MP2/6-31G** and MP2/6-311 + + G(2df, 2pd) geometries. The largest basis sets employed were 6-311G(3df, 2p), 6-311 + + G(3df, 3pd), and the Dunning “correlation consistent” polarized triple-split valence basis set (cc-pVTZ). Electron correlation was probed at the MP4 level, but the QCISD method was also used with the largest basis sets. While electron correlation favors 3 over 1 by about 2 kcal/mol, the correlated relative energies with all basis sets employed range from 0.36–1.03 kcal/mol in favor of 1 . The best estimate of this difference, 0.86 kcal/mol, is essentially identical with the (scaled) zero-point energy difference, 0.84 kcal/mol, favoring 3 over 1 . These results indicate that 1 and 3 have almost exactly the same energy at 0 K. Our best value for the dissociation energy of CH is 42.0 kcal/mol [QCISD(T)/6-311 + + G(3df, 3pd)//MP2(fu)/6-311 + + G(2df, 2pd), corrected to 298 K], which agrees very well with the experimental value. © 1992 by John Wiley & Sons, Inc.