Comparative study of measured and critically evaluated resonance intergral to thermal cross-section ratios. Part I

For 13 isotopes, the resonance integral to thermal crosssection ratio was studied. The results of two different methods, applied in two different laboratories, are compared. One method consists in a direct determination of I₀/π₀-values from Cd-ratio measurements, the other is based on the evaluation of literature data, using accurately determined k₀-factors from two irradiation channels with largely different thermal-to-epithermal flux ratios.     

Three 4‐amino­quinolines of anti­malarial interest

The structures of three compounds with potential anti­malarial activity are reported. In N,N‐diethyl‐N′‐(7‐iodo­quinolin‐4‐yl)ethane‐1,2‐diamine, C₁₅H₂₀IN₃, (I), the mol­ecules are linked into ribbons by N—H⋯N and C—H⋯N hydrogen bonds. In N‐(7‐bromo­quinolin‐4‐yl)‐N′,N′‐diethyl­ethane‐1,2‐diamine dihydrate, C₁₅H₂₀BrN₃·2H₂O, (II), two amino­quino­line mol­ecules and four water mol­ecules form an R₅⁴(13) hydrogen‐bonded ring which links to its neighbours to form a T5(2) one‐dimensional infinite tape with pendant hydrogen bonds to the amino­quinolines. The phosphate salt 7‐chloro‐4‐[2‐(diethyl­ammonio)ethyl­amino]quinolinium bis­(dihydrogen­phosphate) phospho­ric acid, C₁₅H₂₂ClN₃²⁺·2H₂PO₄⁻·H₃PO₄, (III), was prepared in order to establish the protonation sites of these compounds. The phosphate ions form a two‐dimensional hydrogen‐bonded sheet, while the amino­quino­line cations are linked to the phosphates by N—H⋯O hydrogen bonds from each of their three N atoms. While the conformation of the quinoline region hardly varies between (I), (II) and (III), the amino side chain is much more flexible and adopts a significantly different conformation in each case. Aromatic π–π stacking inter­actions are the only supramolecular inter­actions seen in all three structures.     

Sensitive determination of traces of boron in waters,fertilizers na geological and biological materials by isotope-dilution mass spectrometry

A method is described for determining traces of boron in water, fertilizers, geological and biological (reference) materials by isotope-dilution mass spectrometry after separation on an Amberlite IRA-743 borate-selective ion-exchange column. Boron (–250 ng g^?1) in water can be determined with an accuracy of 5–20% (computed on a 2s basis). After correction for weighing errors and for moisture, content, which varied from 0 to 8% for the samples tested, 1–35 μg g^?1 boron in “dry” fertilizer, biological or geological sample can be assayed with an accuracy of 5–30% (2s). In an IAEA interlaboratory program on a simulated fresh water, the method yielded a value of 24.3 +? 2 μg l^?1, compared to the make-up value of 25 μg l^?1.     

1-Chloro-1-(trichlorovinyl)cyclopropane : Molecular structure and conformation in the gaseous phase as determined by electron diffraction

A gas phase electron diffraction investigation of 1-chloro-1-(trichlorovinyl)cyclopropane at 65° showed the existence of one conformer having a perpendicular arrangement of the cyclopropyl- and the trichlorovinylgroup, with torsional angle τ = 91(3)° relative to τ = 180° for the antiperiplanar conformer (CCl-CClanti arrangement). Both the experimental data and a molecular mechanics calculation indicate the lower barrier toward the antiperiplanar form,less than 40 kJ · mol^-1. The second barrier was by molecular mechanics calculated to 60 kJ · mol^-1.     

Adsorption of tracer cations,and the separation of carrier-free95Nb from95Zr,XU1 from U and45Ca from46Sc on titanium phosphate column

Titanium phosphate as ion exchanger for column operation has been prepared by mixing TiCl₄ and H₃PO₄ in suitable proportion. The ratio of titanium: phosphate was obtained to be 1:2.02. The uptake of Na⁺, K⁺, Rb⁺, Cs⁺, Ag⁺, Ca²⁺, Sr²⁺, Ba²⁺, Pb²⁺, Sc³⁺, Co³⁺, Y³⁺, Tb³⁺, Zr⁴⁺ and Th⁴⁺ cations at very small concentrations has been studied on this exchanger. The data indicated that the different cations are adsorbed in the exchanger by different mechanisms. Radiochemical separations of carrier free⁹⁵Nb from⁹⁵Zr, UX₁ from U and⁴⁵Ca from⁴⁶Sc have been achieved by adopting very simple chemical procedures through a column of titanium phosphate. The -spectrum of the separated⁹⁵Nb, UX₁ and⁴⁶Sc showed that the products are of high radionuclidic purity. The individual separation procedures took less than 20 min and the yields are quantitative.     

Barreleneiridium(I) complexes. Crystal structures of [Ir(Me3TFB)(η6-C6H4Me2)]ClO4 and [Ir(TFB)(η5-PhNPh2)]BF4·CH2Cl2 (TFB = tetrafluorobenzobarrelene)

A new series of cationic areneiridium(I) complexes of formula [Ir(barrelene)(arene)]⁺ or [Ir(barrelene)(PhNRPh)]⁺ (R= Ph or H) have been synthesized from neutral iridium complexes of the type [IrY(barrelene)]_x (barrelene = Me₃TFB, Y = Cl or OMe (x = 2), Y = acac (x = 1); barrelene = TFB, Y = OMe (x = 2), Y = acac (x = 1)). The crystal structures of [Ir(Me₃TFB)(1,4-C₆H₄Me₂)]ClO₄ and [Ir(TFB)(PhNPh₂)]BF₄·CH₂Cl₂ have been determined by X-ray diffraction. They crystallize in the space groups Pbca and Pna2₁ respectively with lattice constants of 17.6947(11), 15.8072(10), 16.0019(11) Å and 9.8059(2), 20.8097(9), 14.3367(4) Å. Final R factors were 0.063 and 0.042 for the observed data. Both complexes show a staggered arrangement between the arene and the TFB moieties and deviation from planarity of the coordinated arene ligands. In the second complex the IrC and NC distances, the CNC angle, the type of arene puckering, and the spectroscopic data indicate a distortion of the coordinated arene towards a η⁵-coordinated iminocyclohexadienyl form.     

Activation analysis of geological material using ruthenium as a multiisotopic comparator

The isotopes⁹⁷Ru,¹⁰³Ru and¹⁰⁵Ru, produced by reactor irradiation of elemental ruthenium, were applied as triple comparators in the activation analysis of rock FU-41, a basanitoid from Fuerteventura, Canary Island. The concentrations of the following elements were determined: Sm, Sc, Fe, Co, Na, La, Hf, Eu, Th and Cr. The aim of this work was the experimental control of the error theory of the multiple comparator method as well as the experimental check of the accuracy. Presented at the 3rd Symposium on the Recent Developments in Neutron Activation Analysis, Cambridge (U.K.), 2–4 July 1973.     

Conformational analysis3̄CXXIV: The conformation of ring A in the 4,4-dimethyl-3-androstanone system. The crystal structure of 4,4-dimethylandrostan-3-on-17β-yl benzoate

Molecular mechanics calculations indicate that the deformed chair and twisted-boat conformations are similar in energy for a 4,4-dimethyl-3-keto steroid. Earlier dipole moment work on such compounds is discussed. The crystal structure of 4,4-dimethylandrostan-3-on-17β-yl benzoate has been determined. The crystals are orthorhombic, P2₁2₁2₁, a = 17.096 (2), b = 22.136 (e), c = 6.217 (1) A. The structure was solved by direct methods and refined by least squares to R ? 0.039, R_XXX = 0.038, based on 2168 observed reflections. Ring A is shown to exist in a chair form, deformed as indicated by the calculations.     

HPLC–MS determination of the oxidation products of the reaction between α- and β-pinene and OH radicals

Biogenic non-methane hydrocarbons such as isoprene, alpha-pinene, and beta-pinene, are emitted by forests in very large quantities. To evaluate the role of alpha- and beta-pinene and their contribution to the global production of trace gases and especially aerosol precursors, a study of the oxidation mechanism of alpha- and beta-pinene with hydroxyl radicals must be conducted.The degradation products of both monoterpenes with hydroxyl radicals were identified and quantified in a fast-flow reactor. The products were collected on a liquid-nitrogen trap coated with a 2,4-DNPH solution to which two internal standards (benzaldehyde-2,4-DNPH and tolualdehyde-2,4-DNPH) had been added. The collection method was based on the in situ conversion of aldehyde and/or ketone compounds to their 2,4-dinitrophenylhydrazone derivatives. The derivatives were analyzed by HPLC-MS using APCI(-). TIC chromatograms and mass spectral data for the various oxidation products are presented.For alpha-pinene, pinonaldehyde is the most important degradation product, with smaller amounts of acetone, formaldehyde, campholenealdehyde, and acetaldehyde. For beta-pinene, nopinone and formaldehyde are the most abundant products, of almost equal importance, whereas acetone and acetaldehyde are minor compounds.