Fluorescent pH sensors with negligible sensitivity to ionic strength

Optical pH determination has the fundamental disadvantage of measuring a signal that depends on the ionic strength of the sample. The problem originates from the complex relationship between the proton activity and the concentration of the pH-sensitive dye. The effect of ionic strength on the signal depends on the charge of the indicator and its environment, e.g. the immobilisation matrix. We present novel lipophilic fluorescein esters carrying one negative charge. They are embedded in an uncharged, highly proton-permeable hydrogel to give optical pH sensors that show a negligible cross-sensitivity towards ionic strength. The fluorescent dyes differ in their substituents. This variation of substituents results in dissociation constants between 5.5 and 8.5. The indicators were made lipophilic by esterification of the carboxy group with a C(18) alkyl chain. Since their spectral properties are quite similar, two indicators may be used in one sensor. This results in an optical pH sensor with a dynamic range that extends from pH 4.5 to 8.     

Physically based molecular device model in a transient circuit simulator

Two efficient, physically based models for the real-time simulation of molecular device characteristics of single molecules are developed. These models assume that through-molecule tunnelling creates a steady-state Lorentzian distribution of excess electron density on the molecule and provides for smooth transitions for the electronic degrees of freedom between the tunnelling, molecular-excitation, and charge-hopping transport regimes. They are implemented in the fREEDA™ transient circuit simulator to allow for the full integration of nanoscopic molecular devices in standard packages that simulate entire devices including CMOS circuitry. Methods are presented to estimate the parameters used in the models via either direct experimental measurement or density-functional calculations. The models require 6–8 orders of magnitude less computer time than do full a priori simulations of the properties of molecular components. Consequently, molecular components can be efficiently implemented in circuit simulators. The molecular-component models are tested by comparison with experimental results reported for 1,4-benzenedithiol.     

Wechselwirkungen in Kristallen. 106. Mitteilung. Die Klaviatur der Na⊕-Koordinationszahlen in ihren Carbazolanion-Salzen

Interaction in Crystals: The Keyboard of Na⊕ Coordination Numbers in Its Carbazole Anion Salts Some local minima in the shallow potential of the system carbazole anion, sodium cation, and the ethers tetrahydrofuran, 1,2-dimethoxyethane, diglyme, triglyme, tetraglyme, 15-crown-5 as well as 2.2.1-cryptand are explored experimentally and by quantum-chemical calculations. Three prototype contact-ion multiples of Na⊕-solvated carbazole anion M? salts have been crystallized and structurally characterized: polyether-solvated monomers [M?Na⊕_solv]₁, solvent-shared dimers [M?Na⊕_solv]₂, and solvent-separated polyions [(M?)nNa?_solv](^n?1)? [Na⊕_solv](n_?1). The Na⊕ coordination numbers stretch from 3 to 7 as illustrated by the compounds [(M?)₃Na+]??[Na+(2.2.1-crytand)]₂ for 3 and 7, [(M?)₂Na+(THF)₂]? [Na⊕(2.2.1-cryptand)] for 4 and 7, [M? Na+(diglyme)]₂ for 5, or [M? Na+(l 5-crown-5)] for 6. Structural comparison is based on literature analogies as well as on results of MNDO calculations concerning charge distribution and enthalpies of formation. Taken together, the results demonstrate the delicate energy balance, by which cation solvation can influence the formation of organic salts.     

Drying and pyrolysis of wood particles: experiments and simulation

The objective of this study is to develop a flexible and stable numerical method to predict the thermal decomposition of large wood particles due to drying and pyrolysis. At a later stage, this model is applied to each particle of a packed bed and thus, forms the entire packed bed process as a sum of individual particle processes. Therefore, this approach can deal with particles of different sizes, shapes and properties. A general formulation of the conservation equations allows the geometry of a fuel particle to be treated as a plate, cylinder or sphere. The various processes such as heat-up, drying and pyrolysis are described by a set of one-dimensional and transient conservation equations for mass and energy. This allows for simultaneous processes e.g. reactions in time and covers the entire range between transport-limited (shrinking core) and kinetically limited (reacting core) reaction regimes. The particles interact with a gas phase by heat and mass transfer taking into account the Stefan correction due to the gas outflow during conversion. Experiments carried out span a temperature range between T=300 and 900 °C for particle sizes varying between 8 and 17 mm. A comparison between measurements and predictions of drying models yielded satisfactory agreement only for the constant evaporation temperature model and thus, indicating, that the drying process is transport limited by heat transfer for large wood particles. Likewise, predicted results of pyrolysis for the above-mentioned range of temperatures and sizes agreed satisfactorily with measurements.     

Solvent effects in microemulsion electrokinetic chromatography

The contribution of organic solvents to the mechanisms responsible for separation in microemulsion electrokinetic chromatography (MEEKC) is reviewed. Organic solvents are needed as constituents of microemulsions for a series of reasons. (i). A water-immiscible organic substance is used to form the actual oil phase of the microemulsion, (ii). a less hydrophobic solvent is commonly employed as a so-called co-surfactant, and (iii). in many cases an organic modifier is added to influence the solubility of the analytes in the aqueous phase of the microemulsion. All these organic solvents do not only participate in the separation in their actual function, but also interact with each other and the analytes. Variations in separation selectivities triggered by changes in the nature and/or concentration of these organic solvents present in microemulsions suitable for MEEKC are discussed in this work.     

Sequential Injection Photometric Determination of Molybdenum Using Organic Wetting Film Extraction

Wetting film extraction was combined with colorimetry to determine nanogram amounts of molybdenum(VI). The simple extraction procedure enhanced sensitivity and selectivity while maintaining a high sample throughput. Extraction and back extraction steps were exploited to exclude interference from the 31 metal species and 11 anions tested. In the first step, molybdenum(VI) was extracted into a toluene film as an ion paired complex. Molybdenum(VI) reacted with thiocyanate to form anionic molybdenum(V) and/or molybdenum(VI) thiocyanate complexes. The complexes were extracted into a toluene film containing tetraheptylammonium bromide as ion pairing reagent. The thiocyanate ligands were displaced by 1,5-diphenylcarbazone (DPC) to form a more intensely colored complex (λ_max= 540 nm). DPC was introduced in the back extraction solvent, methanol. The relative standard deviation was 2.5% for 50 ng ml⁻¹of molybdenum(VI) (n= 10) at a rate of 25 samples h⁻¹. The detection limit (3 × baseline noise) was 2.5 × 10⁻⁸M.     

Transesterification of trialkyl phosphates from alkyl bromides

The treatment of trialkyl phosphate with different alkyl bromides provides facile access to mixed phosphate esters. The presence of substoichiometric amounts of lithium bromide was found to be critical to this transesterification process, supporting a mechanism involving initial generation of phosphate anion, followed by its nucleophilic attack on alkyl bromide.     

First enantioselective synthesis of (−)-neplanocin F

(−)-Neplanocin F, the natural isomer of a component of the neplanocin family was enantioselectively synthesized starting from d-γ-ribonolactone. The synthetic approach was based on the preparation of a suitable carbocyclic precursor bearing three hydroxyl groups orthogonally protected. The key steps of the synthesis were the regioselective protection of a secondary allylic alcohol over a homoallylic one and the coupling of the nucleobase with a triflate intermediate.     

Alkyl and stannyl radical generation by CSn and SnSn bond dissociation in photolytically excited peralkylated tristannanes as studied by ESR and 119Sn-CIDNP

Tristannanes used as photochemical precursors for the synthesis of organic compounds react via triplet states followed by homolytic CSn and SnSn bond scission.     

Novel tocopheryl compounds XX. 1,3,8-Trioxaphenanthrenes derived from γ-tocopherol

Condensation of γ-tocopherol with aldehydes provides 2,4-disubstituted 1,3,8-trioxaphenanthrenes in a simple one-pot reaction. The reaction proceeded under acid catalysis according to a two-step alkylation-acetalisation mechanism in yields between 58 and 81%. The title compounds are precursors for the thermal generation of ortho-quinone methides, which can be in situ reduced to give antioxidants of the 5a-substituted α-tocopherol-type. The products were analytically characterized by NMR and HRMS.