Dérivés propargyliques,XII et dérivés de la décahydroquinoléine,II Alkynyl-4, alkényl-4 et alkyl-4-décahydroquinolinols-4 N-substitués

The authors describe the synthesis of decahydro-4-quinolinones and N-substituted 4-alkynyl-, 4-allyl- and 4-alkyldecahydro-4-quinolinols and discuss the stereochemical problems of this compounds.     

Intramolecular hydrogen bonding and hydrogen atom abstraction in gas-phase aliphatic amine radical cations

The intramolecular hydrogen atom abstraction by the nitrogen atom in isolated aliphatic amine radical cations is examined experimentally and with composite high-level ab initio methods of the G3 family. The magnitude of the enthalpy barriers toward H-atom transfer varies with the shape and size of the cyclic transition state and with the degree of substitution at the nitrogen and carbon atoms involved. The lower barriers are found for 1,5- and 1,6-abstraction, for chairlike transition states, for abstraction reactions in ionized primary amines, and for abstraction of H from tertiary carbon atoms. In most cases, the internal energy required for 1,4-, 1,5-, and 1,6-hydrogen atom abstraction to occur is less than that required for gas-phase fragmentation by simple cleavage of C-C bonds, which explains why H-atom transfer can be reversible and result in extensive H/D exchange prior to the fragmentation of many low-energy deuterium labeled ionized amines. The H-atom transfer to nitrogen is exothermic for primary amine radical cations and endothermic for tertiary amines. It gives rise to a variety of distonic radical cations, and these may undergo further isomerization. The heat of formation of the gauche conformers of the gamma-, delta-, and epsilon-distonic isomers is up to 25 kJ mol(-1) lower than that of the corresponding trans forms, which is taken to reflect C-H-N hydrogen bonding between the protonated amino group and the alkyl radical site.     

Multinuclear magnetic resonance spectroscopy studies of the structuration of the tunnels of sepiolite in the presence of intracrystalline pyridine molecules

Sepiolite, a naturally occurring magnesiosilicate nanoporous clay mineral with a tunnel structure, contains two types of water molecules in the structure: zeolitic water trapped inside the tunnels and structural water molecules which interact strongly with magnesium cations. The zeolitic water was removed by heating the sepiolite to 120 degrees C. The partially dehydrated sepiolite absorbed pyridine vapor to produce an intercalated material where the pyridine takes the place of the zeolitic water. 1H solid-state MAS NMR spectroscopy showed that there is isotopic H/D exchange between pyridine-d5 and the remaining structural water molecules of the sepiolite framework. The exchange takes place at room temperature over several days. Wide line solid state 2H NMR of the sequestered pyridine-d5 showed that two populations of pyridine molecules coexist in the material: one very mobile physisorbed population, which can be removed by heating at 90 degrees C, and a population due to pyridine trapped in the tunnels. Except for small in-plane librations, the trapped pyridine was shown to be held rigidly by the sepiolite. When the pyridine intercalated material is heated at 400 degrees C the structural water and some of the pyridine is lost. The remaining pyridine takes the place of the structural water to produce a new inorganic-organic nanohybrid material with the pyridine bound to the terminal Mg(II) in the structure. The pyridine in this material as well as the intercalated material was characterized by slow-spinning 15N and 13C CP/MAS NMR spectroscopy. The 15N NMR was shown to be a very sensitive probe to characterize the various types of pyridine. The data indicate that pyridine molecules in the inorganic-organic nanohybrid material are directly bound to magnesium cations exposed in the tunnels of sepiolite.     

Application of a universal force field to mixed Fe/Mo-S/Se cubane and heterocubane clusters. 1. Substitution of sulfur by selenium in the series [Fe4X4(YCH3)4]2-; X = S/Se and Y = S/Se

A series of Fe-S and Fe-Se cubane clusters containing all four combinations of the general formula [Fe(4)X(4)(Y-CH(3))(4)](2)(-) (X = S/Se, Y = S/Se) is investigated with FTIR and Raman spectroscopy. The terminally selenolate coordinated clusters (Y = Se) are prepared by a new synthetic route. All four cluster compounds are structurally characterized by X-ray single-crystal structure determination. Infrared and Raman spectra of all compounds are presented and interpreted with normal coordinate analysis. The corresponding force fields are based on that developed for the Fe(4)S(4)-benzyl cluster (Czernuszewicz, R. S.; Macor, K. A.; Johnson, M. K.; Gewirth, A.; Spiro, T. G. J. Am.Chem. Soc. 1987, 109, 7178-7187). An empirical procedure is presented to convert Fe-S into Fe-Se force constants. Only minor changes in force constants are found upon S --> Se exchange, reflecting the similarity of the Fe-S and Fe-Se bonds. The drastic frequency shifts in the metal-ligand region observed upon substitution of sulfur by selenium are, therefore, primarily due to the corresponding mass changes.     

Benchmarking of ruthenium initiators for the ROMP of a norbornenedicarboxylic acid ester

The kinetic study of ring-opening metathesis polymerization (ROMP) of a diester functionalised norbornene derivative, (±)-exo,endo-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid diethyl ester, with a series of ruthenium benzylidene complexes revealed the applicability of these initiators for well defined polymerization reactions. Values for the rate of initiation as well as the rate of propagation of the initiators were determined and correlated to the molecular weight and polydispersity of the isolated polymers. As the only initiator providing an entry to virtually monodisperse polymers the classical “first generation Grubbs-catalyst” was identified, while N-heterocyclic carbene based initiators polymerized with a rate of propagation much higher than the rate of initiation yielding polymers with a broader molecular weight distribution.     

Die Kristallstrukturen von KNdTe4, RbPrTe4 und RbNdTe4 — Untersuchungen zur thermischen Stabilität von KNdTe4 sowie Bemerkungen zu einigen anderen Vertretern der Zusammensetzung ALnTe4 (A = K,Rb, Cs und Ln = Seltenerd‐Metall)

Crystal Structures of KNdTe₄, RbPrTe₄, and RbNdTe₄ — Investigations concerning the Thermal Stability of KNdTe₄ as well as some Remarks concerning Additional Representatives of the Composition ALnTe₄ (A = K, Rb, Cs and Ln = Rare Earth Metal) Of the compounds ALnQ₄ (A = Na, K, Rb, Cs; Ln = Lanthanoid; Q = S, Se and Te) the crystal structures of the three new tellurides KNdTe₄, RbPrTe₄ and RbNdTe₄ were determined by X‐ray single‐crystal structure analysis and of the three additional new ones KCeTe₄, KPrTe₄ and CsNdTe₄ by X‐ray powder diffraction experiments. All six new compounds are isotypic with KCeSe₄. Characteristic for the crystal structure of the compounds mentioned above are layers built from (Q₂)^2— dumbbells in form of 4.3².4.3 nets with embedded cations A⁺ and Ln³⁺ between them, which are coordinated eightfold in form of square‐shaped antiprisms by Q ions. The distances Te‐Te within the dumbbells were found to be 277.8(2) pm for all investigated tellurides. By combination of X‐ray diffraction and DTA measurements it was shown that the compound KNdTe₄ is metastable at ambient temperature with a limited existence range between the temperatures 260 and 498 °C.     

Cyclic PNA-based compound directed against HIV-1 TAR RNA: modelling, liquid-phase synthesis and TAR binding

A cyclic molecule including a hexameric PNA sequence has been designed and synthesized in order to target the TAR RNA loop of HIV-1 through the formation of a "kissing complex". For comparison, its linear analogue has also been investigated. The synthesis of the cyclic and linear PNA has been accomplished following a liquid-phase strategy using mixed PNA and fully N-protected (aminoethylglycinamide) fragments. The interactions of this cyclic PNA and its linear analogue with TAR RNA have been studied and the results indicate clearly that no interaction occurs between the cyclic antisense PNA and TAR RNA, whereas a tenuous interaction has been detected with its linear PNA analogue.     

From anisole to 1,2,4,5‐tetramethoxybenzene: Theoretical study of the factors that determine the conformation of methoxy groups on a benzene ring

Unhindered ortho‐dimethoxy‐substituted phenyl rings often display a coplanar conformation. A theoretical study of a series of methoxybenzenes consisting of methoxybenzene (anisole), the three dimethoxybenzenes, and 1,2,4,5‐tetramethoxybenzene, at the DFT/B3LYP/6‐311++G** level of theory, allows us to identify the factors influencing the conformational preference and attribute the coplanarity of such methoxy groups to mesomeric effects. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Sulfoalkyl Ether β-Cyclodextrin Derivatives: Synthesis and Characterizations

A series of sulfoalkyl ether -cyclodextrin derivatives, including sulfoethyl, sulfopropyl and sulfobutyl ethyl -cyclodextrins, have been synthesized and characterized. Each sulfoalkyl ether -cyclodextrin is a mixture of various degrees of substitution and different positional isotherms. Elemental analysis, ¹H NMR, MS, and Differential Scanning Calorimetry analysis were used to determine the average degree of substitution for each -cyclodextrin derivative. The average degrees of substitution are 3.4, 1.6 and 2.5 for sulfoethyl, sulfopropyl and sulfobutyl ether -cyclodextrin, respectively. The water solubility of these derivatives is substantially higher than that of -cyclodextrin. ¹H NMR indicates thatsulfoethyl ether -cyclodextrin may have major substitution on the secondaryhydroxyl group while the major substitution in sulfopropyl and sulfobutyl ether-cyclodextrin could be on the primary hydroxyl group. MS spectra showthat no more than one substitution occurred on a single glucose unit.     

Synthesis and properties of crosslinked polyvinylformamide and polyvinylamine hydrogels in conjunction with silica particles

Polyvinylamine hydrogels with silica particles encapsulated (PVAm/silica) were produced by a two‐step synthesis. In the first step, polyvinylformamide/silica (PVFA/silica) hybrids were synthesized from vinylformamide (VFA) and 1,3‐divinylimidazolidin‐2‐one (1,3‐bisvinylethyleneurea, BVU), as the crosslinker, by radical copolymerization in silica/water suspensions using different compositions of VFA/BVU. The target product PVAm/silica was obtained by acidic hydrolysis of the PVFA/silica hydrogels in a second step. The chemical structures of both hydrogels, PVFA/silica and PVAm/silica, respectively, were revealed by solid‐state ¹³C(¹H) cross‐polarity/magic‐angle spinning NMR spectroscopy. Both hydrogels swelled significantly in water. The swelling capacity of the two systems was characterized by the correlation length ξ (or hydrodynamic blob size) of the network meshes with small‐angle neutron scattering experiments. ξ is significantly larger for PVAm/silica than for PVFA/silica, which corresponds to the observed higher swelling capacity of this polyelectrolyte material. Furthermore, the swelling behavior of the hybrid hydrogels was quantitatively described in terms of free swell capacity, centrifuge‐retention capacity, adsorption against pressure, and free swell rate as compared with values of the corresponding copolymer hydrogels. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3144–3152, 2002