Hybrid Bis-Histidine Phenanthroline-Based Ligands to Lessen Aβ-Bound Cu ROS Production: An Illustration of Cu(I) Significance

We here report the synthesis of three new hybrid ligands built around the phenanthroline scaffold and encompassing two histidine-like moieties: phenHH, phenHGH and H’phenH’, where H correspond to histidine and H’ to histamine. These ligands were designed to capture Cu(I/II) from the amyloid-β peptide and to prevent the formation of reactive oxygen species produced by amyloid-β bound copper in presence of physiological reductant (e.g., ascorbate) and dioxygen. The amyloid-β peptide is a well-known key player in Alzheimer’s disease, a debilitating and devasting neurological disorder the mankind has to fight against. The Cu-Aβ complex does participate in the oxidative stress observed in the disease, due to the redox ability of the Cu(I/II) ions. The complete characterization of the copper complexes made with phenHH, phenHGH and H’phenH’ is reported, along with the ability of ligands to remove Cu from Aβ, and to prevent the formation of reactive oxygen species catalyzed by Cu and Cu-Aβ, including in presence of zinc, the second metal ions important in the etiology of Alzheimer’s disease. The importance of the reduced state of copper, Cu(I), in the prevention and arrest of ROS is mechanistically described with the help of cyclic voltammetry experiments.     

Use of a capillary electrophoresis instrument with laser-induced fluorescence detection for DNA quantitation. Comparison of YO-PRO-1 and PicoGreen assays

Highly selective and sensitive assays are required for detection and quantitation of the small masses of DNA typically encountered in clinical and forensic settings. High detection sensitivity is achieved using fluorescent labeling dyes and detection techniques such as spectrofluorometers, microplate readers and cytometers. This work describes the use of a laser-induced fluorescence (LIF) detector in conjunction with a commercial capillary electrophoresis instrument for DNA quantitation. PicoGreen and YO-PRO-1, two fluorescent DNA labeling dyes, were used to assess the potential of the system for routine DNA analysis. Linearity, reproducibility, sensitivity, limits of detection and quantitation, and sample stability were examined for the two assays. The LIF detector response was found to be linear (R2 > 0.999) and reproducible (RSD < 9%) in both cases. The PicoGreen assay displayed lower limits of detection and quantitation (20 pg and 60 pg, respectively) than the YO-PRO-1 assay (60 pg and 260 pg, respectively). Although a small variation in fluorescence was observed for the DNA/dye complexes over time, quantitation was not significantly affected and the solutions were found to be relatively stable for 80 min. The advantages of the technique include a 4- to 40-fold reduction in the volume of sample required compared to traditional assays, a 2- to 20-fold reduction in the volume of reagents consumed, fast and automated analysis, and low cost (no specific instrumentation required).     

XPS study of surface changes in magnesium subjected to attack by an alkyl halide

Metal-solution interfacial phenomena occuring when magnesium is attacked by a halogen derivative are studied by XPS analysis of the state of the surface formed during this reaction.     

Differentiation of proanthocyanidin tannins from seeds, skins and stems of grapes (Vitis vinifera) and heartwood of Quebracho (Schinopsis balansae) by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and thioacidolysis/liquid chromatography/electrospray ionization mass spectrometry

To control and identify with confidence the principal enological tannins (ETs), we have devised a specific method based on the characterization of proanthocyanidin composition. We started by controlling the red colouring produced by hydrochloric acid butanolysis (e.g. Bate-Smith reaction), due to the formation of anthyocyanidins, typical of proanthocyanidin tannins. Using thioacidolysis/liquid chromatography/electrospray ionization mass spectrometry we were able to identify: (i) the nature of the flavan-3-ols (catechin, epicatechin for procyanidins tannins; gallocatechin, epigallocatechin for prodelphinidins tannins), (ii) the degree of galloylation, (iii) the average degree of polymerization (mDP). We also performed a complete structural study by matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry (MALDI-TOF-MS). By comparing the chromatographic profiles of standard proanthocyanidins prepared in our laboratory with those of a variety of commercial enological tannins, we were able to identify their origin: seed proanthocyanidins (PA): only procyanidins, high level of galloylation, with a large amount of epicatechin, and a low mDP corresponding to a majority of oligomeric tannins; skins PA: a mixture of procyanidins and prodelphinidins, with a predominance of procyanidins, a low level of galloylation, with a large amount of epicatechin, and a very variable mDP; stems PA, mixture of procyanidins and prodelphinidins, little galloylation, with a very low level of epicatechin in the terminal unit, and a medium value for mDP (>5); Quebracho PA: results show no known flavan-3-ols, and according to MALDI-TOF-MS, the main structure is attributed to a large amount of profisetinidin, corresponding to a resorcinol proanthocyanidin.     

Micro- and nanofluidics for DNA analysis

Miniaturization to the micrometer and nanometer scale opens up the possibility to probe biology on a length scale where fundamental biological processes take place, such as the epigenetic and genetic control of single cells. To study single cells the necessary devices need to be integrated on a single chip; and, to access the relevant length scales, the devices need to be designed with feature sizes of a few nanometers up to several micrometers. We will give a few examples from the literature and from our own research in the field of miniaturized chip-based devices for DNA analysis, including dielectrophoresis for purification of DNA, artificial gel structures for rapid DNA separation, and nanofluidic channels for direct visualization of single DNA molecules.     

The contribution of calpains in the down-regulation of Mdm2 and p53 proteolysis in reconstructed human epidermis in response to solar irradiation

The p53 protein accumulates in human skin cells in vitro and in vivo when UV-irradiated. The transient stability of p53 requires a decrease in the activity of the ubiquitin ligase murine double minute 2 (Mdm2). Solar light irradiation (52.5, 105 and 405 mJ/cm2) of reconstructed human epidermis caused cutaneous damage. Specifically, UV-B induced the formation of sunburn cells and at first, an increase in the accumulation of p53 protein. Unexpectedly, 24 h after irradiation, a specific proteolytic cleavage of p53 resulted in the formation of a 40 kDa fragment. Both the accumulation of p53 and the proteolytic cleavage increased, commensurate with the UV dose. In contrast to p53, the level of expression of Mdm2 decreased drastically with the UV dose. It is important to note that calpastatin (20 microM), a specific inhibitor of calpains, decreased the formation of sunburn cells, inhibited the cleavage of p53 and induced an accumulation of Mdm2. The apoptotic process is strongly repressed. This demonstrates for the first time that calpains can participate in the down-regulation of Mdm2 in the epidermis very rapidly after UV irradiation, and that they contribute to a specific cleavage of p53 protein. All of these processes may be involved in the apoptotic response of the skin to UV stimulation.     

Modifications of in vitro skin penetration under solar irradiation: evaluation on flow-through diffusion cells

The effect of solar irradiation on ex vivo dermatomed hairless rat skin samples maintained in culture on flow-through diffusion cells for at least 24 h was evaluated by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay and by histological observations. Transepidermal water loss (TEWL) measurements and kinetic analysis of the permeation of both tritiated water and 14C caffeine through the skin were performed after full-spectrum solar exposure involving the use of a xenon arc solar simulator. After a UV exposure of less than 420 mJ/cm2, skin integrity and permeation of both water and caffeine did not change significantly. In contrast, after a 420 mJ/cm2 UV exposure, the epidermis appeared more contracted, associated with an increase of 55% of TEWL and 220% of the skin permeation of tritiated water after 6 h. The data suggested a dramatic alteration of the skin barrier integrity. Moreover, the flux of 14C caffeine increased rapidly by 338% of the absorption of water 12 h after irradiation. These results reveal the presence of a threshold UV exposure that would not modify skin penetration.     

Very large breathing effect in the first nanoporous chromium(III)-based solids: MIL-53 or Cr(III)(OH) x [O(2)C-C(6)H(4)-CO(2)] x [HO(2)C-C(6)H(4)-CO(2)H](x) x H(2)O(y)

The first three-dimensional chromium(III) dicarboxylate, MIL-53as or Cr(III)(OH) x [O(2)C-C(6)H(4)-CO(2)].[HO(2)C-C(6)H(4)-CO(2)H](0.75), has been obtained under hydrothermal conditions (as: as-synthesized). The free acid can be removed by calcination giving the resulting solid, MIL-53ht or Cr(III)(OH) x [O(2)C-C(6)H(4)-CO(2)]. At room temperature, MIL-53ht adsorbs atmospheric water immediately to give Cr(III)(OH) x [O(2)C-C(6)H(4)-CO(2)] x H(2)O or MIL-53lt (lt: low-temperature form, ht: high-temperature form). Both structures, which have been determined by using X-ray powder diffraction data, are built up from chains of chromium(III) octahedra linked through terephthalate dianions. This creates a three-dimensional structure with an array of one-dimensional large pore channels filled with free disordered terephthalic molecules (MIL-53as) or water molecules (MIL-53lt); when the free molecules are removed, this leads to a nanoporous solid (MIL-53ht) with a Langmuir surface area over 1500 m(2)/g. The transition between the hydrated form (MIL-53lt) and the anhydrous solid (MIL-53ht) is fully reversible and followed by a very high breathing effect (more than 5 A), the pores being clipped in the presence of water molecules (MIL-53lt) and reopened when the channels are empty (MIL-53ht). The thermal behavior of the two solids has been investigated using TGA and X-ray thermodiffractometry. The sorption properties of MIL-53lt have also been studied using several organic solvents. Finally, magnetism measurements performed on MIL-53as and MIL-53lt revealed that these two phases are antiferromagnetic with Néel temperatures T(N) of 65 and 55 K, respectively. Crystal data for MIL-53as is as follows: orthorhombic space group Pnam with a = 17.340(1) A, b = 12.178(1) A, c = 6.822(1) A, and Z = 4. Crystal data for MIL-53ht is as follows: orthorhombic space group Imcm with a = 16.733(1) A, b = 13.038(1) A, c = 6.812(1) A, and Z = 4. Crystal data for MIL-53lt is as follows: monoclinic space group C2/c with a = 19.685(4) A, b = 7.849(1) A, c = 6.782(1) A, beta = 104.90(1) degrees, and Z = 4.     

Diastereoselective addition of alkynylalanes to carbohydrate-derived nitrones

Propargylic N-hydroxypyrrolidines were prepared by diastereoselective addition of pre-formed alkynylalanes to various highly functionalized carbohydrate-derived endocyclic nitrones. Excellent diastereoisomeric excesses were obtained using dimethyl-2-phenylethynylalane. Addition of other alkynylalane derivatives to such type of nitrones is also reported.