Polymer bilayer formation due to specific interactions between beta-cyclodextrin and adamantane: a surface force study

The purposes of this study are to utilize the interactions between an adamantane end-capped poly(ethylene oxide) (PEO) and a cationic polymer of beta-cyclodextrin to build polymer bilayers on negatively charged surfaces, and to investigate the interactions between such layers. The association of this system in solution has been studied by rheology, light scattering, and fluorescence measurements. It was found that the adamantane-terminated PEO (PEO-Ad) mixed with the beta-cyclodextrin polymer gives complexes where the interpolymer links are formed by specific inclusion of the adamantane groups in the beta-cyclodextrin cavities. This results in a higher viscosity of the solution and growth of intermolecular clusters. The interactions between surfaces coated with a cationized beta-cyclodextrin polymer across a water solution containing PEO-Ad polymers were studied by employing the interferometric surface force apparatus (SFA). In the first step, the interaction between mica surfaces coated with the cationized beta-cyclodextrin polymer in pure water was investigated. It was found that the beta-cyclodextrin polymer adsorbs onto mica and almost neutralizes the surface charge. The adsorbed layers of the beta-cyclodextrin polymer are rather compact, with a layer thickness of about 60 A (30 A per surface). Upon separation, a very weak attractive force is observed. The beta-cyclodextrin solution was then diluted by pure water by a factor of 3000 and a PEO-Ad polymer was introduced into the solution. Two different architectures of the PEO-Ad polymer were investigated: a four-arm structure and a linear structure. After the adsorption of the PEO polymer onto the beta-cyclodextrin layer reached equilibrium, the forces were measured again. It was found that the weak repulsive long-range force had disappeared and an attractive force caused the surfaces to jump into contact, and that the compressed layer thickness had increased. The attractive force is interpreted as being due to a specific recognition between the hydrophobic adamantane groups on the PEO-Ad polymer and the hydrophobic cavity in the beta-cyclodextrin molecules. Furthermore, the attractive force observed on separation has increased significantly, which is a further indication of a specific interaction between the beta-cyclodextrin polymer and the adamantane groups.     

Simultaneous analysis of cadmium, lead, mercury, and arsenic content in foodstuffs of animal origin by inductively coupled plasma/mass spectrometry after closed vessel microwave digestion: method validation

A method validation of the total analysis of cadmium (Cd), lead (Pb), arsenic (As), and mercury (Hg) in foodstuffs by inductively coupled plasma/mass spectrometry (ICP/MS) after closed vessel microwave digestion is presented. Due to the lack of reference method for ICP/MS techniques in food and, based on the project of the European Committee of Normalization (CEN/TC 275/WG 10), the Agence Fran?aise de Normalisation (AFNOR) guidelines NF V03-110 were used for the evaluation of this method based on 2 steps, sample preparation and multielement detection. Several criteria considered as compulsory (linearity, specificity, precision under repeatability conditions, and trueness) have been estimated and discussed, in addition to intermediate precision reproducibility, the limit of detection, and the limit of quantification. Furthermore, a comparison with in-house methods using electrothermal atomic absorption was performed using an external proficiency testing scheme and food samples. The results indicated that this method could be used in the laboratory for the routine determination of these 4 cumulative toxic metals in foodstuffs with acceptable analytical performance.     

Content uniformity of pharmaceutical solid dosage forms by near infrared hyperspectral imaging: A feasibility study

Near-infrared imaging systems simultaneously record spectral and spatial information. Each measurement generates a data cube containing several thousand spectra. Chemometric methods are therefore required to extract qualitative and quantitative information. The aim of this study was to determine the feasibility of quantifying active pharmaceutical ingredient (API) and excipient content in pharmaceutical formulations using hyperspectral imaging.Two kinds of tablets with a range of API content were analysed: a binary mixture of API and cellulose, and a pharmaceutical formulation with seven different compounds. Two pixel sizes, 10 μm/pixel and 40 μm/pixel, were compared, together with two types of spectral pretreatment: standard normal variate (SNV) normalization and Savitzky-Golay smoothing. Two methods of extracting concentrations were compared: the partial least squares 2 (PLS2) algorithm, which predicts the content of several compounds simultaneously, and the multivariate classical least squares (CLS) algorithm based on pure compound reference spectra without calibration.Best content predictions were achieved using 40 μm/pixel resolution and the PLS2 method with SNV normalized spectra. However, the CLS method extracted distribution maps with higher contrast and was less sensitive to noisy spectra and outliers; its API predictions were also highly correlated to real content, indicating the feasibility of predicting API content using hyperspectral imaging without calibration.     

Synthesis, structure, and characterisation of a new phenolato-bridged manganese complex [Mn2(mL)2]2+: chemical and electrochemical access to a new mono-mu-oxo dimanganese core unit

The dinuclear phenolato-bridged complex [(mL)Mn(II)Mn(II)(mL)](ClO(4))(2) (1(ClO(4))(2)) has been obtained with the new [N(4)O] pentadentate ligand mL(-) (mLH=N,N'-bis-(2-pyridylmethyl)-N-(2-hydroxybenzyl)-N'-methyl-ethane-1,2-diamine) and has been characterised by X-ray crystallography. X- and Q-band EPR spectra were recorded and their variation with temperature was examined. All spectra exhibit features extending over 0-800 mT at the X band and over 100-1450 mT at the Q band, features that are usually observed for dinuclear Mn(II) complexes. Cyclic voltammetry of 1 exhibits two irreversible oxidation waves at E(1)(p)=0.89 V and E(2)(p)=1.02 V, accompanied on the reverse scan by an ill-defined cathodic wave at E(1')(p)=0.56 V (all measured versus the saturated calomel electrode (SCE)). Upon chemical oxidation with tBuOOH (10 equiv) at 20 degrees C, 1 is transformed into the mono-mu-oxo species [(mL)Mn(III)-(mu-O)-Mn(III)(mL)](2+) (2), which eventually partially evolves into the di-mu-oxo species [(mL)Mn(III)-(mu-O)(2)-Mn(IV)(mL)](n+) (3) in which one of the aromatic rings of the ligand is decoordinated. The UV/Vis spectrum of 2 displays a large absorption band at 507 nm, which is attributed to a phenolate-->Mn(III) charge-transfer transition. The cyclovoltammogram of 2 exhibits two reversible oxidation waves, at 0.65 and 1.16 V versus the SCE, corresponding to the Mn(III)Mn(III)/Mn(III)Mn(IV) and Mn(III)Mn(IV)/Mn(IV)Mn(IV) oxidation processes, respectively. The one-electron electrochemical oxidation of 2 leads to the mono-mu-oxo mixed-valent species [(mL)Mn(III)-(mu-O)-Mn(IV)(mL)](3+) (2 ox). The UV/Vis spectrum of 2 ox exhibits one large band at 643 nm, which is attributed to the phenolate-->Mn(IV) charge-transfer transition. 2 ox can also be obtained by the direct electrochemical oxidation of 1 in the presence of an external base. The 2 ox and 3 species exhibit a 16-line EPR signal with first peak to last trough widths of 125 and 111 mT, respectively. Both spectra have been simulated by using colinear rhombic Mn-hyperfine tensors. Mechanisms for the chemical formation of 2 and the electrochemical oxidation of 1 into 2 ox are proposed.     

Hydrogen storage in borohydrides Comparison of hydrolysis conditions of LiBH<Subscript>4</Subscript>, NaBH<Subscript>4</Subscript> and KBH<Subscript>4</Subscript>

The hydrogen storage capabilities of alkaline borohydrides through a hydrolyzing process were determined by taking into consideration the hydration of the end products. Comparison of LiBH₄, NaBH₄ and KBH₄ showed their storage capacities to be dependent on the composition of the metaborate formed. This composition is ruled by the hydrolysis conditions, especially the temperature reached during the reaction and the stability of the hydrates. The borohydride with the highest hydrogen content in the solid state, LiBH₄, could be less efficient than KBH₄ if the hydrolysis is performed at 120°C.     

On-chip pumping for pressure mobilization of the focused zones following microchip isoelectric focusing

Isoelectric focusing (IEF), traditionally accomplished in slab or tube gels, has also been performed extensively in capillary and, more recently, in microchip formats. IEF separations performed in microchips typically use electroosmotic flow (EOF) or chemical treatment to mobilize the focused zones past the detection point. This report describes the development and optimization of a microchip IEF method in a hybrid PDMS-glass device capable of controlling the mobilization of the focused zones past the detector using on-chip diaphragm pumping. The microchip design consisted of a glass fluid layer (separation channels), a PDMS layer and a glass valve layer (pressure connections and valve seats). Pressure mobilization was achieved on-chip using a diaphragm pump consisting of a series of reversible elastomeric valves, where a central diaphragm valve determined the volume of solution displaced while the gate valves on either side imparted directionality. The pumping rate could be adjusted to control the mobilization flow rate by varying the actuation times and pressure applied to the PDMS to actuate the valves. In order to compare the separation obtained using the chip with that obtained in a capillary, a serpentine channel design was used to match the separation length of the capillary, thereby evaluating the effect of diaphragm pumping itself on the overall separation quality. The optimized mIEF method was applied to the separation of labeled amino acids.     

SPR imaging for label-free multiplexed analyses of DNA N-glycosylase interactions with damaged DNA duplexes

Base excision repair (BER) is the major mechanism for the correction of damaged nucleobases resulting from the alkylation and oxidation of DNA. The first step in the BER pathway consists of excision of the abnormal base by several specific DNA N-glycosylases. A decrease in BER activity was found to be related to an increased risk of carcinogenesis and aging. To investigate BER activities we set up a new device for DNA repair analysis based on surface plasmon resonance imaging (SPRi). Oligonucleotides bearing an abnormal nucleoside, namely 8-oxo-7,8-dihydro-2'-deoxyguanosine and (5'S)-5',8-cyclopurine-2'-deoxynucleoside, were grafted by a pyrrole electro-copolymerization process on a glass prism coated with a gold layer. The latter label-free DNA sensor chip permits the detection of N-glycosylase/AP-lyase activity as well as the binding of repair proteins to DNA damage without cleavage activity. Thus, the Fapy DNA N-glycosylase (Fpg) protein is shown as expected to bind and then cleave its natural substrate, namely 8-oxo-7,8-dihydro-guanine, together with the resulting abasic site. Using the current SPR imaging-based DNA array we observed an original binding activity of Fpg towards the (5'S)-5',8-cyclodAdenosine residue. These results altogether show that SPR imaging may be used to simultaneously and specifically detect recognition and excision of several damaged DNA nucleobases, and constitutes an interesting technique to screen inhibitors of DNA repair proteins.     

Band-Selective HSQC and HMBC Experiments Using Excitation Sculpting and PFGSE

Variants of the HSQC and HMBC experiments are described. They allow the restriction of the heteronuclear chemical shift domain without causing spectral folding. Selectivity is introduced in the HSQC experiment by means of excitation sculpting. The selective element of the pulse sequence is a double pulsed field gradient spin echo. It may be used either split by the t(1) evolution period, or not. The selectivity profile depends on the scheme used as well as on the number of protons attached to the heteronucleus. The selective HMBC experiment requires only a single echo sequence as no strict control of the signal phase is required. A complex glycoconjugate is used as a test compound for the new pulse sequences.     

Identifying Space-Dependent Coefficients and the Order of Fractionality in Fractional Advection–Diffusion Equation

Tracer tests in natural porous media sometimes show abnormalities that suggest considering a fractional variant of the advection–diffusion equation supplemented by a time derivative of non-integer order. We are describing an inverse method for this equation: It finds the order of the fractional derivative and the coefficients that achieve minimum discrepancy between solution and tracer data. Using an adjoint equation divides the computational effort by an amount proportional to the number of freedom degrees, which becomes large when some coefficients depend on space. Method accuracy is checked on synthetical data, and applicability to actual tracer test is demonstrated.